scholarly journals A Wideband Circular Polarized Antenna using Coplanar Waveguide

2019 ◽  
Vol 8 (6S4) ◽  
pp. 587-589
Keyword(s):  
Circular Polarization ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Rectangular Slot ◽  
Feed Line ◽  
Polarization Characteristics ◽  
Orthogonal Phase

A wideband coplanar waveguide (CPW) antenna with circular polarization characteristics using modified ground slot is studied in this work. Proposed design incorporates a hexagonal slot instead of rectangular slot, accounting for enhanced impedance matching. This ground slot is energized by a 50Ω feed line, resulting in excitation of two orthogonal phase quadrature modes (even-odd modes). Thus, fulfilling the essential criteria required for realizing circular polarization. A narrow horizontal slit (lg) is embedded in the ground plane at immediate left of feed line, accounting for wideband characteristics. 10dB impedance bandwidth of proposed antenna extends from 2.65- 5.60 GHz, while 3dB axial ratio bandwidth extends from 3.90- 5.80 GHz. Hence, overlapping bandwidth of proposed antenna extends from 3.90 - 5.60 GHz. RHCP characteristics with monopole radiation pattern makes proposed antenna useful for WLAN, radio navigation and radiolocation applications.

A Compact Broadband Circularly Polarized Slot Antenna for Universal UHF RFID Reader and GPS

2021 ◽  
Vol 36 (5) ◽  
pp. 589-595
Author(s):  
Canjie Chen ◽  
Quanyuan Feng
Keyword(s):  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Uhf Rfid ◽  
Circularly Polarized ◽  
Rectangular Slot ◽  
Polarization Characteristics ◽  
Ground Plate

A novel compact printed broadband circularly polarized slot antenna is proposed in this paper. The antenna consists of an inverted L-shaped coplanar waveguide feed structure and a square ground plate loaded with three rectangular slots. The antenna achieves good impedance matching and circular polarization characteristics by adjusting the size of the L-shaped band and the rectangular slot. The simulation results show that the antenna has a 10-dB impedance bandwidth of 1360 MHz (690-2050 MHz) and a 3 dB axial ratio (AR) bandwidth of 490 MHz (770-1260 MHz). Additionally, the maximum gain reached 4.02 dBi. The antenna proposed in this paper can be applied to UHF RFID and GPS frequency bands.

scholarly journals Wideband Crescent-Shaped Slotted Printed Antenna with Radiant Circular Polarisation

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Akrem Asmeida ◽  
Zuhairiah Zainal Abidin ◽  
Shaharil Mohd Shah ◽  
Muhammad Ramlee Kamarudin ◽  
Norun Abdul Malek ◽  
...  
Keyword(s):  
Communication Systems ◽  
High Efficiency ◽  
Impedance Matching ◽  
Ground Plane ◽  
Axial Ratio ◽  
Basic Structure ◽  
Impedance Bandwidth ◽  
Defected Ground Structure ◽  
Circular Polarisation ◽  
Rectangular Slot

Producing a suitable impedance matching between the radiating element and the feedline is the prior hurdle to overcome for a wideband antenna with circular polarisation designs. This study presents a novel antenna consisting of a defected ground structure (DGS) and a crescent-slot radiating patch for broad impedance bandwidth. In addition, a narrow rectangular slot was etched on the ground plane for antenna compactness and outcomes improvement. In order to examine the reliability, two different numerical softwares were compared based on the antenna’s basic structure. Apart from this, an equivalent circuit of the proposed prototype is modelled logically using ADS 2016. The numerical results demonstrate that the impedance bandwidth was about 74.6% for < −10 dB, while the 3 dB axial ratio bandwidth greater than 53% was achieved. In the operational bandwidth of the design, good impedance matching and high efficiency were seen, which shows that this design is appropriate for modern wireless communication systems in ISM and GSM bands.

scholarly journals Coplanar Waveguide-Fed Bidirectional Same-Sense Circularly Polarized Metasurface-Based Antenna

2021 ◽  
Vol 21 (3) ◽  
pp. 210-217
Author(s):  
Cho Hilary Scott Nkimbeng ◽  
Heesu Wang ◽  
Ikmo Park
Keyword(s):  
Reflection Coefficient ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Axial Ratio ◽  
Radiation Efficiency ◽  
Impedance Bandwidth ◽  
Antenna Gain ◽  
Circularly Polarized ◽  
Feed Line

This paper presents the design of a bidirectional same-sense circularly polarized (CP) antenna that uses metasurfaces. The antenna consists of two metasurfaces, each comprising an array of 2 × 4 corner truncated patches placed back-to-back on the top and bottom of the antenna. In addition, a ground plane with an etched slot is sandwiched between the substrates at the front and back, and the feed line is a 50 Ω coplanar waveguide. The antenna radiates same-sense right-handed CP waves in both the front and back directions and has overall dimensions of 48 mm × 24 mm × 3.048 mm (0.91λo × 0.45λo × 0.05λo at 5.7 GHz). The measured reflection coefficient for |S11| < -10 dB yields an impedance bandwidth of 5.21–6.26 GHz (18.4%) and an axial ratio (AR) bandwidth of 5.36–6 GHz (11.2%) for both front and back directions. The antenna gain is 3–5.29 dBic for both directions and has a radiation efficiency of >96% within its AR bandwidth.

A Compact Wideband Dual-Circular Polarization CPW-Fed Slot Antenna

2020 ◽  
Vol 35 (10) ◽  
pp. 1200-1206
Author(s):  
Zhao Jiang ◽  
Shi Huang ◽  
Zhi Wang ◽  
Xiao Zhao ◽  
Ting Wan
Keyword(s):  
Circular Polarization ◽  
Standing Wave ◽  
Simple Structure ◽  
Coplanar Waveguide ◽  
Axial Ratio ◽  
Voltage Standing Wave Ratio ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Feed Line

A compact wideband coplanar waveguide (CPW) excited slot antenna with dual-circular polarization (DCP) is presented and fabricated in this paper. Two inverted-L-shaped patches are implanted in a square slot to achieve wideband DCP characteristic. The feed line is terminated on an inverted-L-shaped patch. Moreover, two rectangular slots are added on the corners of the antenna to improve the bandwidth of axial ratio (AR) and the voltage standing wave ratio (VSWR). The simulated results show that the designed antenna can generate a good impedance bandwidth of 70.4% and a 3-dB AR bandwidth of 48.6%, respectively. This antenna possesses the qualities of small size, simple structure, and good dual-circular polarization.

CPW-fed Circularly Polarized Slot Antenna with Small Gap and Stick-shaped Shorted Strip for UHF FRID Readers

Frequenz ◽  
2018 ◽  
Vol 72 (5-6) ◽  
pp. 181-188
Author(s):  
Chien-Yuan Pan ◽  
Chum-Chieh Su ◽  
Wei-Lin Yang
Keyword(s):  
Radio Frequency Identification ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Axial Ratio ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Magnetic Current ◽  
Antenna Structure ◽  
Circularly Polarized ◽  
Rectangular Slot

Abstract A new circularly polarized (CP) slot antenna with a small gap and a stick-shaped shorted strip is presented. The proposed antenna has a sufficient bandwidth for ultrahigh frequency (UHF) radio-frequency identification (RFID) reader applications. The antenna structure consists of a rectangular slot with a small gap, a stick-shaped shorted strip and a 50 Ω coplanar waveguide (CPW) feedline with an asymmetrical ground plane. By using the stick -shaped shorted strip to disturb magnetic current distribution on the slot, the CP radiation can be generated. The measured results demonstrate that the proposed antenna can reach a 10 dB return loss impedance bandwidth of 14.1 % (894–1030 MHz) and a 3 dB axial ratio (AR) bandwidth of 6.4 % (910–970 MHz). The whole antenna size is 80 × 80 × 1.6 mm3.

scholarly journals Square Slot Antenna for Wide Circularly Polarized Bandwidth and Axial Ratio Beamwidth

2021 ◽  
Vol 17 (1) ◽  
pp. 1-11
Author(s):  
Vijay Sharma ◽  
Tejpal Jhajharia
Keyword(s):  
Circular Polarization ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Axial Ratio ◽  
Polarization Characteristic ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Frequency Range ◽  
Antenna Structure ◽  
The Right

Abstract The article proposes design investigation and experimental results of a coplanar waveguide (CPW) fed square slot antenna that gives wideband circular polarization. This circular polarization characteristic is achieved by embedding a square shape stub to left bottom corner and an L-shaped strip to the right upper corner of the slot. A high impedance bandwidth of 87.8 % (3.6–9.0 GHz), a wide axial ratio bandwidth of 73.05 % (4.2–9.0 GHz) and wide 3-dB axial ratio beamwidth of 90° in the entire frequency range of interest are achieved with this antenna structure. To improve the 3-dB axial ratio bandwidth, three slots (two horizontal and one vertical) are scratched at the exterior periphery of the ground plane. These perturbation assemblies are accountable to excite orthogonal modes and help increase an axial ratio bandwidth. The designed antenna displays the constant and steady radiation patterns in the complete frequency range of concern. The overall dimension of the presented compact antenna is 0.24λ × 0.24λ × 0.01λ.

A Broadband Circularly Polarized Cross-slotted Patch Antenna with Horizontal Meandered Strip (HMS)

Frequenz ◽  
2020 ◽  
Vol 74 (5-6) ◽  
pp. 191-199
Author(s):  
M. K. Verma ◽  
Binod K. Kanaujia ◽  
J. P. Saini ◽  
Padam S. Saini
Keyword(s):  
Circular Polarization ◽  
Patch Antenna ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Radiation Patterns ◽  
Circularly Polarized ◽  
Feeding Technique

AbstractA broadband circularly polarized slotted square patch antenna with horizontal meandered strip (HMS) is presented and studied. The HMS feeding technique provides the good impedance matching and broadside symmetrical radiation patterns. A set of cross asymmetrical slots are etched on the radiating patch to realize the circular polarization. An electrically small stub is added on the edge of the antenna for further improvement in performance. Measured 10-dB impedance bandwidth (IBW) and 3-dB axial ratio bandwidth (ARBW) of the proposed antenna are 32.31 % (3.14–4.35 GHz) and 20.91 % (3.34–4.12 GHz), respectively. The gain of the antenna is varied from 3.5 to 4.86dBi within 3-dB ARBW. Measured results matched well with the simulated results.

scholarly journals CPW-fed circularly-polarized antenna array with high front-to-back ratio and low-profile

Open Physics ◽  
2018 ◽  
Vol 16 (1) ◽  
pp. 651-655 ◽  
Author(s):  
Yilin Liu ◽  
Kama Huang
Keyword(s):  
Antenna Array ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Axial Ratio ◽  
Antenna Design ◽  
Impedance Bandwidth ◽  
Feeding Method ◽  
Circularly Polarized ◽  
Low Profile ◽  
Novel Design

Abstract A novel design of a coplanar waveguide (CPW) feed antenna array with circular polarization (CP) and a high front-to-back ratio is described. The proposed CP array is achieved by using a compact CPW–slotline transition network etched in the ground plane. The measured results show that this kind of feeding method can improve the impedance bandwidth, as well as the axial ratio bandwidth of the CP antenna array and provide adequate gain. The proposed array can achieve a 6.08% impedance bandwidth and a 4.10% CP bandwidth. Details of the antenna design and experimental results are presented and discussed.

A compact polarization reconfigurable stacked microstrip antenna for WiMAX application

2020 ◽  
pp. 1-16
Author(s):  
Murari Shaw ◽  
Niranjan Mandal ◽  
Malay Gangopadhyay
Keyword(s):  
Microstrip Antenna ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Rectangular Slot ◽  
Substrate Layer ◽  
Linearly Polarized ◽  
Coaxial Probe

Abstract In this paper, a stacked microstrip patch antenna with polarization reconfigurable property has been proposed for worldwide interoperability for microwave access (WiMAX) application. The proposed antenna has two substrate layers: upper and lower layers with two radiating patches connected with the coaxial probe. Without the upper layer the lower square-shaped substrate layer having regular hexagonal radiating patch with probe fed acts as a linear polarized antenna with impedance bandwidth for (S11 ≤ −10 dB) is 370 MHz 10.56% (3.32–3.69 GHz) cover WiMAX (3.4–3.69 GHz) application band. The hexagonal radiating patch is perturbed with an optimum rectangular slot to enhance the impedance bandwidth of the antenna. The lower substrate layer having hexagonal patch with the same probe position is stacked with the upper square-shaped substrate layer with same sized square patch and the upper patch soldered with the coaxial probe. The overall stacked antenna generates a circularly polarized band when the opposite corner of the top square radiating patch of the upper layer is truncated with optimum size. In order to generate another circularly polarized band and to improve the input impedance matching of the stacked antenna, the top radiating patch is perturbed with two slots and a slit. The stacked circularly polarized antenna generates impedance bandwidth of 12.75% (3.23–3.67 GHz) for (S11 ≤ −10 dB) with two circularly polarized bands (3.34–3.37 GHz) and (3.66–3.70 GHz) as per (axial ratio ≤ 3 dB) for WiMAX application. Therefore, the proposed antenna can be used as linearly polarized or dual band circularly polarized according to requirement.

scholarly journals Bandwidth Enhancement Technique of the Meandered Monopole Antenna

2015 ◽  
Vol 2015 ◽  
pp. 1-6
Author(s):  
Chien-Jen Wang ◽  
Dai-Heng Hsieh
Keyword(s):  
Communication Systems ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Matching Condition ◽  
Resonant Mode ◽  
Monopole Antenna ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Feeding Structure

A small dual-band monopole antenna with coplanar waveguide (CPW) feeding structure is presented in this paper. The antenna is composed of a meandered monopole, an extended conductor tail, and an asymmetrical ground plane. Tuning geometrical structure of the ground plane excites an additional resonant frequency band and thus enhances the impedance bandwidth of the meandered monopole antenna. Unlike the conventional monopole antenna, the new resonant mode is excited by a slot trace of the CPW transmission line. The radiation performance of the slot mode is as similar as that of the monopole. The parametrical effect of the size of the one-side ground plane on impedance matching condition has been derived by the simulation. The measured impedance bandwidths, which are defined by the reflection coefficient of −6 dB, are 186 MHz (863–1049 MHz, 19.4%) at the lower resonant band and 1320 MHz (1490–2810 MHz, 61.3%) at the upper band. From the results of the reflection coefficients of the proposed monopole antenna, the operated bandwidths of the commercial wireless communication systems, such as GSM 900, DCS, IMT-2000, UMTS, WLAN, LTE 2300, and LTE 2500, are covered for uses.

Sign in / Sign up

Export Citation Format

Share Document