scholarly journals Bragg Grating Diffraction light at Different Wavelength and Incident Light

2019 ◽  
Vol 8 (9S) ◽  
pp. 385-389
Keyword(s):  
Electric Field ◽  
Diffraction Efficiency ◽  
Signal To Noise Ratio ◽  
Incident Angle ◽  
Incident Light ◽  
Simulation Software ◽  
Bragg Grating ◽  
X Ray Diffraction ◽  
Diffraction Of Light ◽  
Grating Diffraction

The diffraction grating is an important device that makes use of the diffraction of light to produce spectra. Diffraction is also fundamental in other applications such as x-ray diffraction studies of crystals and holography. We proposed a design of Bragg grating waveguide to investigate the behavior of diffraction of light at different incident angle and wavelengths. Using finite difference time domain (FDTD) photonics simulation software the performance of proposed waveguide is observed in term of output power, electric field, diffraction efficiency (DE) and signal to noise ratio (SNR). It is found that the proposed waveguide provides better diffracted light with electric field distribution with 1.969 v/m, Diffraction efficiency 8%, and SNR (25.5 dB) at 1.55µm wavelength and 00 degrees of incident angle

Mathematical model to predict the characteristics of polarization in dielectric materials: The concept of piezoelectrcity and electrostriction

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Mathematical Model ◽  
Electric Field ◽  
Lead Zirconate Titanate ◽  
Dielectric Material ◽  
Strain Curve ◽  
Dielectric Materials ◽  
Lead Zirconate ◽  
Simulation Software ◽  
Constitutive Law ◽  
Basic Material

Model was developed for the prediction of polarization characteristics in a dielectric material exhibiting piezoelectricity and electrostriction based on mathematical equations and MATLAB computer simulation software. The model was developed based on equations of polarization and piezoelectric constitutive law and the functional coefficient of Lead Zirconate Titanate (PZT) crystal material used was 2.3×10-6 m (thickness), the model further allows the input of basic material and calculation of parameters of applied voltage levels, applied stress, pressure, dielectric material properties and so on, to generate the polarization curve, strain curve and the expected deformation change in the material length charts. The mathematical model revealed that an application of 5 volts across the terminals of a 2.3×10-6 m thick dielectric material (PZT) predicted a 1.95×10-9 m change in length of the material, which indicates piezoelectric properties. Both polarization and electric field curve as well as strain and voltage curve were also generated and the result revealed a linear proportionality of the compared parameters, indicating a resultant increase in the electric field yields higher polarization of the dielectric materials atmosphere.

Narrow-frequency sharp-angular filters using all-dielectric cascaded meta-gratings

Nanophotonics ◽  
2020 ◽  
Vol 9 (10) ◽  
pp. 3443-3450 ◽  
Author(s):  
Wei-Nan Liu ◽  
Rui Chen ◽  
Wei-Yi Shi ◽  
Ke-Bo Zeng ◽  
Fu-Li Zhao ◽  
...  
Keyword(s):  
Thin Film ◽  
Signal To Noise Ratio ◽  
Incident Angle ◽  
Design Strategy ◽  
Transmission Peak ◽  
High Signal ◽  
Waveguide Array ◽  
Signal To Noise ◽  
Center Wavelength ◽  
Noise Ratio

AbstractSelective transmission or filtering always responds to either frequency or incident angle, so as hardly to maximize signal-to-noise ratio in communication, detection and sensing. Here, we propose compact meta-filters of narrow-frequency sharp-angular transmission peak along with broad omnidirectional reflection sidebands, in all-dielectric cascaded subwavelength meta-gratings. The inherent collective resonance of waveguide-array modes and thin film approximation of meta-grating are employed as the design strategy. A unity transmission peak, locating at the incident angle of 44.4° and the center wavelength of 1550 nm, is demonstrated in a silicon meta-filter consisting of two-layer silicon rectangular meta-grating. These findings provide possibilities in cascaded meta-gratings spectroscopic design and alternative utilities for high signal-to-noise ratio applications in focus-free spatial filtering and anti-noise systems in telecommunications.

Investigation on dynamic holographic display in liquid crystal film doped with carbon dots

2020 ◽  
Vol 10 (6) ◽  
pp. 780-787
Author(s):  
Hongyue Gao ◽  
Suna Li ◽  
Jicheng Liu ◽  
Wen Zhou ◽  
Fan Xu ◽  
...  
Keyword(s):  
Liquid Crystal ◽  
Electric Field ◽  
Real Time ◽  
Diffraction Efficiency ◽  
Carbon Dots ◽  
Applied Electric Field ◽  
Light Polarization ◽  
Forming Process ◽  
Time Dynamic ◽  
Holographic Display

In this paper, we studied the holographic properties of liquid crystal (LC) thin film doped with carbon dots (CDs) which can be used as real-time holographic display screen. The maximum value of diffraction efficiency can reach up to 30% by using a low applied electric field 0.2 V/μm. Holograms in the LC film can be dynamically formed and self-erased. The hologram build-up time and the hologram self-erasure time in the material is fast enough to realize video refresh rate. In addition, the forming process of hologram was studied. The holographic diffraction efficiency was measured depending on the intensity of recording light, applied electric field, the intensity of readout light, and readout light polarization direction. Triple enhancement of the diffraction efficiency value by the modulation of voltage under the condition of low recording energy is presented. Therefore, we develop an easy way to obtain real-time dynamic holographic red, green and blue displays with high diffraction efficiency, which allow the LC film doped with CDs to be used as a holographic 3D display screen.

The Finite Element Analysis of the Large-Scale Converter Transformer Valve Side of the Electric Field

2013 ◽  
Vol 325-326 ◽  
pp. 476-479 ◽  
Author(s):  
Lin Suo Zeng ◽  
Zhe Wu
Keyword(s):  
Finite Element ◽  
Electric Field ◽  
Large Scale ◽  
Calculation Model ◽  
Simulation Software ◽  
Field Calculation ◽  
Element Analysis ◽  
Ansys Simulation ◽  
The Finite Element Analysis ◽  
Electric Field Calculation

This article is based on finite element theory and use ANSYS simulation software to establish electric field calculation model of converter transformer for a ±800kV and make electric field calculation and analysis for valve winding. Converter transformer valve winding contour distribution of electric field have completed in the AC, DC and polarity reversal voltage.

scholarly journals Revealing the mechanism of electric-field-induced phase transition in antiferroelectric NaNbO3 by in situ high-energy x-ray diffraction

2021 ◽  
Vol 118 (13) ◽  
pp. 132903
Author(s):  
Mao-Hua Zhang ◽  
Changhao Zhao ◽  
Lovro Fulanović ◽  
Jürgen Rödel ◽  
Nikola Novak ◽  
...  
Keyword(s):  
Phase Transition ◽  
Electric Field ◽  
High Energy ◽  
X Ray Diffraction ◽  
X Ray

scholarly journals Inter-UAV Routing Scheme Testbeds

Drones ◽  
2020 ◽  
Vol 5 (1) ◽  
pp. 2
Author(s):  
Georgios Amponis ◽  
Thomas Lagkas ◽  
Panagiotis Sarigiannidis ◽  
Vasileios Vitsas ◽  
Panagiotis Fouliras
Keyword(s):  
Signal To Noise Ratio ◽  
Real Life ◽  
Simulation Software ◽  
Propagation Models ◽  
Routing Schemes ◽  
Routing Scheme ◽  
Related Information ◽  
Efficient Control ◽  
Communication Architectures ◽  
Scheme Evaluation

With the development of more advanced and efficient control algorithms and communication architectures, UAVs and networks thereof (swarms) now find applications in nearly all possible environments and scenarios. There exist numerous schemes which accommodate routing for such networks, many of which are specifically designed for distinct use-cases. Validation and evaluation of routing schemes is implemented for the most part using simulation software. This approach is however incapable of considering real-life noise, radio propagation models, channel bit error rate and signal-to-noise ratio. Most importantly, existing frameworks or simulation software cannot sense physical-layer related information regarding power consumption which an increasing number of routing protocols utilize as a metric. The work presented in this paper contributes to the analysis of already existing routing scheme evaluation frameworks and testbeds and proposes an efficient, universal and standardized hardware testbed. Additionally, three interface modes aimed at evaluation under different scenarios are provided.

Optical Analysis of Hole Patterned Ag Nanoparticle Structure

2021 ◽  
Vol 21 (8) ◽  
pp. 4192-4199
Author(s):  
Hyun-Ji Jeon ◽  
Ji-Yeon Kim ◽  
Jinnil Choi
Keyword(s):  
Metal Nanoparticles ◽  
Optical Transmission ◽  
Incident Angle ◽  
Incident Light ◽  
Localized Surface Plasmon ◽  
Optical Analysis ◽  
Optical Noise ◽  
Hole Configuration ◽  
Nanoparticle Structure ◽  
Sub Wavelength

A structure with periodic sub-wavelength nanohole patterns interacts with incident light and causes extraordinary optical transmission (EOT), with metal nanoparticles leading to localized surface plasmon resonance (LSPR) phenomena. To explore the effects of metal nanoparticles (NPs), optical analysis is performed for metal NP layers with periodic hole patterns. Investigation of Ag NP arrangements and comparisons with metal film structures are presented. Ag NP structures with different hole configuration are explored. Also, the effects of increasing light incident angle are investigated for metal NP structures where EOT peak at 460 nm wavelength is observed. Moreover, electric field distributions at each transmittance peak wavelengths and optical noise are analyzed. As a result, optical characteristics of metal NP structures are obtained and differences in resonance at each wavelength are highlighted.

scholarly journals Error Correction for FSI-Based System without Cooperative Target Using an Adaptive Filtering Method and a Phase-Matching Mosaic Algorithm

2018 ◽  
Vol 8 (10) ◽  
pp. 1954 ◽  
Author(s):  
Xing-Ting Xiong ◽  
Xing-Hua Qu ◽  
Fu-Min Zhang
Keyword(s):  
Adaptive Filtering ◽  
Signal To Noise Ratio ◽  
Incident Angle ◽  
External Cavity ◽  
Phase Matching ◽  
Maximum Deviation ◽  
External Cavity Laser ◽  
Filtering Method ◽  
System A ◽  
Sampling Points

In our frequency scanning interferometry-based (FSI-based) absolute distance measurement system, a frequency sampling method is used to eliminate the influence of laser tuning nonlinearity. However, because the external cavity laser (ECL) has been used for five years, factors such as the mode hopping of the ECL and the low signal-to-noise ratio (SNR) in a non-cooperative target measurement bring new problems, including erroneous sampling points, phase jumps, and interfering signals. This article analyzes the impacts of the erroneous sampling points and interfering signals on the accuracy of measurement, and then proposes an adaptive filtering method to eliminate the influence. In addition, a phase-matching mosaic algorithm is used to eliminate the phase jump, and a segmentation mosaic algorithm is used to improve the data processing speed. The result of the simulation proves the efficiency of our method. In experiments, the measured target was located at eight different positions on a precise guide rail, and the incident angle was 12 degrees. The maximum deviation of the measured results between the FSI-based system and the He-Ne interferometer was 9.6 μm, and the maximum mean square error of our method was 2.4 μm, which approached the Cramer-Rao lower bound (CRLB) of 0.8 μm.

Sign in / Sign up

Export Citation Format

Share Document