scholarly journals Implementation of RC Oscillator with High-Q Frequency Selection using CCCII.

2019 ◽  
Vol 8 (12) ◽  
pp. 4470-4477
Keyword(s):  
Second Generation ◽  
Current Mode ◽  
Cmos Technology ◽  
Current Conveyor ◽  
Band Pass Filter ◽  
Phase Oscillators ◽  
Pass Filter ◽  
High Q ◽  
Voltage Mode ◽  
Band Pass

This article given a second generation current controlled current conveyor positive (CCCII+), second generation current controlled current conveyor negative (CCCII-), Quadrature oscillator with high-Q frequency choosing network and implementing completely different phase oscillators by employing (CCCII+) positive and (CCCII-) negative, and high band pass filter network, the approach is predicted on the CMOS technology . The root of this concept is, considering a customary voltage mode oscillator which consists of band pass filter with prime quality issue (high-Q) and voltage mode amplifier is transfigure into current mode oscillator by replacing tans-conductance amplifier. Because the loop of the oscillator is has lavish selectivity, the oscillator process less distortion. In addition 3dB bandwidth, oscillating condition, oscillation frequency of the oscillator could linearly, independently and electronically be tuned by adjusting the bias current of the (CCCII±)[1], lastly different simulations have been carried out to verify the linearity between output and input ports, range of frequency operations. These results can justify that the designed circuits are workable.

GENERATION OF GROUNDED CAPACITOR ICCII-BASED BAND-PASS FILTERS

2007 ◽  
Vol 16 (04) ◽  
pp. 553-566 ◽  
Author(s):  
AHMED M. SOLIMAN
Keyword(s):  
Transfer Function ◽  
Current Mode ◽  
Negative Resistance ◽  
Current Conveyor ◽  
Band Pass Filter ◽  
Spice Simulation ◽  
Pass Filter ◽  
Voltage Mode ◽  
Band Pass ◽  
Simulation Results

A new current-mode band-pass filter using the inverting second-generation current conveyor (ICCII) is introduced. The circuit is generated from a frequency-dependent negative resistance (FDNR)-C circuit realized using ICCII+. It is observed that a voltage-mode band-pass filter using two CCII+ has similar transfer function to this current-mode filter. The adjoint network theorem is used to demonstrate the transformation between the two circuits. Two new voltage-mode grounded capacitor band-pass filters using two ICCII are also introduced. The first voltage-mode circuit is generated from the FDNR-C circuit and employs two opposite Z polarity ICCII. The second voltage-mode circuit is obtained from the first circuit by relocation of the input and a grounded terminal. Two new additional grounded capacitor and grounded resistor current-mode band-pass filters with independent control on the filter Q are also introduced. Spice simulation results with 0.35 μm CMOS transistors model are included to demonstrate the practicality of the two ICCII- band-pass current-mode filter.

scholarly journals Single CDTA-Based Current Mode All-Pass Filter and Its Applications

2011 ◽  
Vol 2011 ◽  
pp. 1-5 ◽  
Author(s):  
Neeta Pandey ◽  
Sajal K. Paul
Keyword(s):  
Input Impedance ◽  
Current Mode ◽  
Cmos Technology ◽  
Band Pass Filter ◽  
Output Impedance ◽  
Spice Simulation ◽  
Pass Filter ◽  
Transconductance Amplifier ◽  
Band Pass ◽  
Current Difference

This paper presents a single current difference transconductance amplifier (CDTA) based all-pass current mode filter. The proposed configuration makes use of a grounded capacitor which makes it suitable for IC implementation. Its input impedance is low and output impedance is high, hence suitable for cascading. The circuit does not use any matching constraint. The nonideality analysis of the circuit is also given. Two applications, namely, a quadrature oscillator and a highQband pass filter are developed with the proposed circuit. The functionality of the circuit is verified with SPICE simulation using 0.35 μm TSMC CMOS technology parameters.

scholarly journals CMOS Realizable and Highly Cascadable Structures of First-Order All-Pass Filters

2021 ◽  
Vol 18 (14) ◽  
Author(s):  
Jitender Jitender ◽  
Jitendra MOHAN ◽  
Bhartendu CHATURVEDI
Keyword(s):  
Second Generation ◽  
Cmos Technology ◽  
Current Conveyor ◽  
Passive Component ◽  
Pass Filter ◽  
Quadrature Oscillator ◽  
First Order ◽  
Voltage Mode ◽  
Fully Differential ◽  
Low Sensitivity

Two novel resistorless structures of a first-order voltage-mode all-pass filter are presented in the paper. Both the structures employ a fully differential second-generation current conveyor (FDCCII) as the primary active element, in addition to an active resistor. A grounded capacitor is the only passive component used in both the structures. In both the structures, CMOS realization of FDCCII is utilized; hence, these structures are CMOS compatible. Some of the other highly demanded features possessed by the presented all-pass structures are: a simple circuit topology, electronic tunability, high input impedance, constraint-free operation in terms of passive component matching, and low sensitivity figures. The theoretical performances under ideal and non-ideal scenarios are presented in detail. Furthermore, the proposed idea is extended to an Nth-order voltage-mode all-pass filter and a quadrature oscillator to explore some of the possible applications. PSPICE simulation results verify the theoretical claims of the presented all-pass filters. HIGHLIGHTS Two novel resistorless structures of first-order all-pass filters based on fully differential second-generation current conveyor are presented Performance of the proposed structures are thoroughly described in ideal and non-ideal scenarios Theoretically described details of the proposed structures are verified by carrying simulations on PSPICE using 180 nm CMOS technology An Nth-order all-pass filter and a quadrature oscillator are also presented as applications GRAPHICAL ABSTRACT

Sign in / Sign up

Export Citation Format

Share Document