scholarly journals The Effect of Slat Opening on Vortex Shedding Behind a Circular Cylinder

2019 ◽  
Vol 8 (4) ◽  
pp. 6879-6885
Keyword(s):  
Reynolds Number ◽  
Circular Cylinder ◽  
Governing Equation ◽  
Vortex Shedding ◽  
Vortex Formation ◽  
Bluff Bodies ◽  
Vortex Induced Vibrations ◽  
Better Than ◽  
Laminar Model

Add-on devices are widely used as one of the means of suppressing vortex induced vibrations from bluff bodies. The present study numerically investigates flow over a circular cylinder attached by an axial slat. The axial slat were of uniform and non-uniform openings of 67% and 44% porosity. The governing equation was solved using viscous-laminar model at Reynolds number, Re=300. It was found that the presence of the axial slats significantly suppressed vortex shedding behind the circular cylinder. The non-uniform slats showed longer vortex formation length with lower drag, in comparison to that of the uniform slats. In addition, the slats with 67% porosity of both uniform and non-uniform openings suppressed vortex better than that of 44% porosity slats, indicated by the longer vortex formation length and weaker intensity of vortices.

scholarly journals Effect of Cylinder Gap Ratio on The Wake of a Circular Cylinder Enclosed by Various Perforated Shrouds

CFD letters ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 51-68
Author(s):  
Nurul Azihan Ramli ◽  
Azlin Mohd Azmi ◽  
Ahmad Hussein Abdul Hamid ◽  
Zainal Abidin Kamarul Baharin ◽  
Tongming Zhou
Keyword(s):  
Reynolds Number ◽  
Circular Cylinder ◽  
Vortex Shedding ◽  
Control Method ◽  
Lift Coefficient ◽  
Base Case ◽  
Bluff Bodies ◽  
Ansys Fluent ◽  
Gap Ratio ◽  
Spacing Ratio

Flow over bluff bodies produces vortex shedding in their wake regions, leading to structural failure from the flow-induced forces. In this study, a passive flow control method was explored to suppress the vortex shedding from a circular cylinder that causes many problems in engineering applications. Perforated shrouds were used to control the vortex shedding of a circular cylinder at Reynolds number, Re = 200. The shrouds were of non-uniform and uniform holes with 67% porosity. The spacing gap ratio between the shroud and the cylinder was set at 1.2, 1.5, 2, and 2.2. The analysis was conducted using ANSYS Fluent using a viscous laminar model. The outcomes of the simulation of the base case were validated with existing studies. The drag coefficient, Cd, lift coefficient, Cl and the Strouhal number, St, as well as vorticity contours, velocity contours, and pressure contours were examined. Vortex shedding behind the shrouded cylinders was observed to be suppressed and delayed farther downstream with increasing gap ratio. The effect was significant for spacing ratio greater than 2.0. The effect of hole types: uniform and non-uniform holes, was also effective at these spacing ratios for the chosen Reynolds number of 200. Specifically, a spacing ratio of 1.2 enhanced further the vortex intensity and should be avoided.

On vortex formation from a cylinder. Part 1. The initial instability

1988 ◽  
Vol 190 ◽  
pp. 491-512 ◽  
Author(s):  
M. F. Unal ◽  
D. Rockwell
Keyword(s):  
Reynolds Number ◽  
Kinetic Energy ◽  
Circular Cylinder ◽  
Shear Layer ◽  
Vortex Shedding ◽  
Vortex Formation ◽  
Absolute Instability ◽  
Near Wake ◽  
Lower Range ◽  
Fluctuation Amplitude

Vortex shedding from a circular cylinder is examined over a tenfold range of Reynolds number, 440 ≤ Re ≤ 5040. The shear layer separating from the cylinder shows, to varying degrees, an exponential variation of fluctuating kinetic energy with distance downstream of the cylinder. The characteristics of this unsteady shear layer are interpreted within the context of an absolute instability of the near wake. At the trailing-end of the cylinder, the fluctuation amplitude of the instability correlates well with previously measured values of mean base pressure. Moreover, this amplitude follows the visualized vortex formation length as Reynolds number varies. There is a drastic decrease in this near-wake fluctuation amplitude in the lower range of Reynolds number and a rapid increase at higher Reynolds number. These trends are addressed relative to the present, as well as previous, observations.

Suppression of Vortex Shedding Downstream of a Circular Cylinder Using Permeable Cylinders in Shallow Water

2013 ◽  
Author(s):  
Göktürk Memduh Özkan ◽  
Hüseyin Akıllı
Keyword(s):  
Circular Cylinder ◽  
Flow Control ◽  
Shallow Water ◽  
Flow Structure ◽  
Vortex Shedding ◽  
Outer Cylinder ◽  
Vortex Formation ◽  
Stream Velocity ◽  
Bluff Bodies ◽  
Different Diameters

The characteristics of the flow around a 50mm circular cylinder surrounded by a permeable outer cylinder were investigated by Particle Image Velocimetry (PIV) and flow visualization techniques in order to control the unsteady flow structure downstream of the cylinder in shallow water. The effect of outer permeable cylinder with a porosity of β = 0.4 on the flow control was studied using five different diameters; D = 60, 70, 80, 90, 100mm. Depth-averaged free stream velocity was kept constant as U = 170mm/s corresponding to a Reynolds number of Re = 8500 and the water height was adjusted to hw = 25mm throughout the study. The results clearly showed that the outer permeable cylinder significantly affects the flow structure of the inner cylinder. It was found that by the existence of outer cylinder, the frequency of unsteady vortex shedding is reduced, vortex formation region is elongated and fluctuations are attenuated which are good indications of effective flow control. Owing to the results, optimum parameters were defined and suggested for the suppression of vortex-induced vibrations on bluff bodies.

Turbulent wake behind a curved circular cylinder

2014 ◽  
Vol 742 ◽  
pp. 192-229 ◽  
Author(s):  
José P. Gallardo ◽  
Helge I. Andersson ◽  
Bjørnar Pettersen
Keyword(s):  
Reynolds Number ◽  
Circular Cylinder ◽  
Vortex Shedding ◽  
Bluff Body ◽  
Vortex Formation ◽  
Axial Flow ◽  
Turbulent Wake ◽  
Outer Face ◽  
Wake Region ◽  
Axial Curvature

AbstractThis paper reports results from a direct numerical simulation of the flow past a circular cylinder with axial curvature. The main objective is to explore the effects of spanwise curvature on the stability of the shear layers and the turbulent wake at the subcritical Reynolds number of 3900. The bluff-body geometry is adapted from a previous study conducted at lower Reynolds numbers, in which a quarter segment of a ring represented the deformed cylinder. A convex configuration in which the free-stream direction is towards the outer face of the ring is adopted here. The present results show a striking distinction between the upper and lower wake regions. Despite the turbulent character of the wake, the upper wake region is more coherent due to the periodic vortex shedding of primary vortical structures, which are in close alignment with the axial curvature. A mild axial flow develops upwards along the lee face of the curved cylinder, displacing the vortex formation region further downstream from the location expected for a straight cylinder at the same Reynolds number. In the lower wake region the vortex shedding strength is drastically reduced due to larger local inclination, resulting in higher three-dimensionality and loss of coherence. A strong downdraft with a swirling pattern is the dominating feature in the lower base region. This is associated with a substantial decrease of the base suction, and the suppression of the characteristic recirculating backflow.

Vortex shedding from a circular cylinder in moderate-Reynolds-number shear flow

1980 ◽  
Vol 101 (4) ◽  
pp. 721-735 ◽  
Author(s):  
Masaru Kiya ◽  
Hisataka Tamura ◽  
Mikio Arie
Keyword(s):  
Reynolds Number ◽  
Circular Cylinder ◽  
Shear Flow ◽  
Vortex Shedding ◽  
Transverse Velocity ◽  
Number Range ◽  
Uniform Shear ◽  
Reynolds Number Range ◽  
Moderate Reynolds Number ◽  
Shear Parameter

The frequency of vortex shedding from a circular cylinder in a uniform shear flow and the flow patterns around it were experimentally investigated. The Reynolds number Re, which was defined in terms of the cylinder diameter and the approaching velocity at its centre, ranged from 35 to 1500. The shear parameter, which is the transverse velocity gradient of the shear flow non-dimensionalized by the above two quantities, was varied from 0 to 0·25. The critical Reynolds number beyond which vortex shedding from the cylinder occurred was found to be higher than that for a uniform stream and increased approximately linearly with increasing shear parameter when it was larger than about 0·06. In the Reynolds-number range 43 < Re < 220, the vortex shedding disappeared for sufficiently large shear parameters. Moreover, in the Reynolds-number range 100 < Re < 1000, the Strouhal number increased as the shear parameter increased beyond about 0·1.

Laminar Forced Convection From a Circular Cylinder Placed in a Micropolar Fluid

2006 ◽  
Vol 129 (3) ◽  
pp. 256-264 ◽  
Author(s):  
F. M. Mahfouz
Keyword(s):  
Reynolds Number ◽  
Circular Cylinder ◽  
Prandtl Number ◽  
Drag Coefficient ◽  
Forced Convection ◽  
Vortex Shedding ◽  
Micropolar Fluid ◽  
Clear Trend ◽  
Thermal Fields ◽  
Laminar Forced Convection

In this paper laminar forced convection associated with the cross-flow of micropolar fluid over a horizontal heated circular cylinder is investigated. The conservation equations of mass, linear momentum, angular momentum and energy are solved to give the details of flow and thermal fields. The flow and thermal fields are mainly influenced by Reynolds number, Prandtl number and material parameters of micropolar fluid. The Reynolds number is considered up to 200 while the Prandtl number is fixed at 0.7. The dimensionless vortex viscosity is the only material parameter considered in this study and is selected in the range from 0 to 5. The study has shown that generally the mean heat transfer decreases as the vortex viscosity increases. The results have also shown that both the natural frequency of vortex shedding and the amplitude of oscillating lift force experience clear reduction as the vortex viscosity increases. Moreover, the study showed that there is a threshold value for vortex viscosity above which the flow over the cylinder never responds to perturbation and stays symmetric without vortex shedding. Regarding drag coefficient, the results have revealed that within the selected range of controlling parameters the drag coefficient does not show a clear trend as the vortex viscosity increases.

Vortex-induced vibrations of a long flexible circular cylinder

1993 ◽  
Vol 250 ◽  
pp. 481-508 ◽  
Author(s):  
D. Brika ◽  
A. Laneville
Keyword(s):  
Circular Cylinder ◽  
Flow Velocity ◽  
Vortex Shedding ◽  
Abrupt Change ◽  
Velocity Range ◽  
End Effects ◽  
Synchronization Region ◽  
Vortex Induced Vibrations ◽  
Set Up ◽  
Vortex Shedding Modes

In an experimental study of the vortex-induced oscillations of a long flexible circular cylinder, the observed stationary amplitudes describe an hysteresis loop partially different from earlier studies. Each branch of the loop is associated with a vortex shedding mode and, as a jump from one branch to the other occurs, the phase difference between the cylinder displacement and the vortex shedding undergoes an abrupt change. The critical flow velocities at which the jump occurs concur with the flow visualization observations of Williamson & Roshko (1988) on the vortex shedding modes near the fundamental synchronization region. Impulsive regimes, obtained at a given flow velocity with the cylinder initially at rest or pre-excited, and progressive regimes resulting from a variation of the flow velocity, are examined. The occurrence of bifurcations is detected for a flow velocity range in the case of the impulsive regimes. The coordinates of the bifurcations define a boundary between two vortex shedding modes, a boundary that verifies the critical curve obtained by Williamson & Roshko (1988). The experimental set-up of this study simulates half the wavelength of a vibrating cable, eliminates the end effects present in oscillating rigid cylinder set-up and has one of the lowest damping ratios reported for the study of this phenomenon.

Sign in / Sign up

Export Citation Format

Share Document