Effectiveness of pulse-plasma ignition systems with synchronization of processes in discharge circuits

2020 ◽  
pp. 11-14
Author(s):  
F.A. Gizatullin ◽  
R.M. Salihov
Keyword(s):  
Arc Discharge ◽  
Electric Arc ◽  
Pulse Plasma ◽  
Turbine Engines ◽  
Discharge Process ◽  
Gas Turbine Engines ◽  
Pulsed Plasma ◽  
Ignition System ◽  
Plasma Ignition ◽  
Spark Plug

The results of the development and modeling of pulse-plasma ignition systems (IS) of gas turbine engines with synchronization of processes in the main and auxiliary discharge circuits, which occupy an intermediate position between the pulsed capacitive and plasma IS, in which a long electric arc discharge is implemented, are presented. It is experimentally proven that the flammability of pulsed-plasma IS exceeds the igniting ability of capacitive IS of an oscillatory discharge with equal energies of storage capacitors. Keywords: pulse-plasma ignition system, aperiodic discharge, process synchronization, discharge current, spark plug voltage, flammability, starting characteristic of the igniter. [email protected]

Regularities of fast-flowing pulsed discharge processes for assessing the adequacy of simulation results for capacitive ignition systems GTD

2020 ◽  
pp. 11-14
Author(s):  
F.A. Gazitullin ◽  
Z.G. Gabidullina ◽  
R.M. Salihov ◽  
A.G. Karimova
Keyword(s):  
Spark Discharge ◽  
Core Material ◽  
Turbine Engines ◽  
Storage Capacitor ◽  
Gas Turbine Engines ◽  
Pulsed Discharge ◽  
Charge Voltage ◽  
Spark Plug ◽  
Interelectrode Gap ◽  
Discharge Parameters

The results of the analysis of the laws of fast-flowing pulsed processes in semiconductor plugs of capacitive ignition systems of gas turbine engines (GTE), which can be a guideline for assessing the adequacy of the developed models of ignition systems, are presented. The most stable dependences of the energy parameters of discharges in semiconductor plugs on the parameters of the discharge circuits are presented — the capacitance and charge voltage of the storage capacitor, the inductance of the discharge circuit, the interelectrode gap, the cable length, the core material of the induction coil, type of spark discharge. Keywords capacitive ignition system, storage capacitor, semiconductor spark plug, spark discharge parameters [email protected]

Gas Screen in Components of Gas Turbine Engines

1997 ◽  
Vol 28 (7-8) ◽  
pp. 536-542
Author(s):  
A. A. Khalatov ◽  
I. S. Varganov
Keyword(s):  
Gas Turbine ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Gas Screen

Potential Application of Composite Materials to Future Gas Turbine Engines

1988 ◽  
Author(s):  
James C. Birdsall ◽  
William J. Davies ◽  
Richard Dixon ◽  
Matthew J. Ivary ◽  
Gary A. Wigell
Keyword(s):  
Composite Materials ◽  
Gas Turbine ◽  
Potential Application ◽  
Turbine Engines ◽  
Gas Turbine Engines

PYROMET ALLOY CTX-1

Alloy Digest ◽  
1997 ◽  
Vol 46 (5) ◽  
Keyword(s):  
Coefficient Of Thermal Expansion ◽  
High Strength ◽  
Heat Treating ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Thermal Fatigue Resistance ◽  
Temperature Performance ◽  
Hot Work Die ◽  
Pressure Hydrogen ◽  
Hot Hardness

Abstract Pyromet CTX-1 is a high-strength, precipitation-hardenable superalloy exhibiting a low coefficient of thermal expansion and high strength up to about 1200 deg F. The alloy possesses high hot hardness and good thermal fatigue resistance. Its applications include components for gas turbine engines, hot-work die applications and high-pressure hydrogen environments. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-56. Producer or source: Carpenter. Originally published February 1976, revised May 1997.

HAYNES ALLOY 75

Alloy Digest ◽  
1999 ◽  
Vol 48 (7) ◽  
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Heat Treating ◽  
Turbine Engines ◽  
Chromium Alloy ◽  
Gas Turbine Engines ◽  
Typical Application ◽  
Good Oxidation Resistance ◽  
Temperature Performance ◽  
Haynes Alloy

Abstract Haynes alloy 75 is an 80 nickel-20 chromium alloy with both good oxidation resistance and good mechanical properties at high temperatures. It is amenable to all forms of fabrication and welding. A typical application for sheet metal is fabrications in gas turbine engines. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming and heat treating. Filing Code: Ni-557. Producer or source: Haynes International Inc.

Method of tribodiagnostics of d-30KU engines/KP with the use of a microwave plasma complex: results of metrological examination and analysis of the accuracy

2020 ◽  
pp. 22-29
Author(s):  
A. Bogoyavlenskiy ◽  
A. Bokov
Keyword(s):  
Gas Turbine ◽  
Microwave Plasma ◽  
Technical Condition ◽  
The State ◽  
Turbine Engines ◽  
Metrological Examination ◽  
Gas Turbine Engines ◽  
High Frequency Plasma ◽  
Frequency Plasma ◽  
Primary Standards

The article contains the results of the metrological examination and research of the accuracy indicators of a method for diagnosing aircraft gas turbine engines of the D30KU/KP family using an ultra-high-frequency plasma complex. The results of metrological examination of a complete set of regulatory documents related to the diagnostic methodology, and an analysis of the state of metrological support are provided as well. During the metrological examination, the traceability of a measuring instrument (diagnostics) – an ultrahigh-frequency plasma complex – is evaluated based on the scintillation analyzer SAM-DT-01–2. To achieve that, local verification schemes from the state primary standards of the corresponding types of measurements were built. The implementation of measures to eliminate inconsistencies identified during metrological examination allows to reduce to an acceptable level the metrological risks of adverse situations when carrying out aviation activities in industry and air transportation. In addition, the probability of occurrence of errors of the first and second kind in the technological processes of tribodiagnostics of aviation gas turbine engines is reduced when implementing a method that has passed metrological examination in real practice. At the same time, the error in determining ratings and wear indicators provides acceptable accuracy indicators and sufficient reliability in assessing the technical condition of friction units of the D-30KP/KP2/KU/KU-154 aircraft engines.

On the prospects of application of nanostructured heterophase polyfunctional composite materials inengine building industry

2019 ◽  
pp. 50-57
Author(s):  
O. B. Silchenko ◽  
M. V. Siluyanova ◽  
V. Е. Nizovtsev ◽  
D. A. Klimov ◽  
A. A. Kornilov
Keyword(s):  
Composite Materials ◽  
Gas Turbine ◽  
Developed Countries ◽  
The United States ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Nanostructured Composite ◽  
Polymer Metal ◽  
Long Operation ◽  
Prospects Of Application

The paper gives a brief review of properties and applications of developed extra-hard nanostructured composite materials and coatings based on them. The presentresearch suggestsaerospace applications of nanostructured composite materials based on carbides, carbonitrides and diboridesof transition and refractory metals. To improve the technical and economic performance of gas turbine engines, it is advisable to use new composite structural materials whose basic physicomechanical properties are several times superior to traditional ones. The greatest progress in developing new composites should be expected in the area of materials created on the basis of polymer, metal, intermetallic and ceramic matrices. Currently components and assemblies of gas turbine engines and multiple lighting power units with long operation life and durability will vigorously develop. Next-generation composites are studied in all developed countries, primarily in the United States and Japan.

Sign in / Sign up

Export Citation Format

Share Document