scholarly journals Studying the Effect of Implement of Two Plowing Depths and Manure Mixing with Soil on the Soil Moisture Content

2017 ◽  
Vol 30 (2) ◽  
pp. 36-44
Author(s):  
Shaker H. Adday ◽  
Kawther A. Hemeed ◽  
Murtadha A. Al-faris
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Soil Moisture Content ◽  
Agricultural Research ◽  
Soil Depth ◽  
Research Station ◽  
Silty Clay ◽  
Manure Application ◽  
Sunflower Crop ◽  
Moldboard Plow

A field experiment was carried out in silty clay soil at Agricultural Research Station of Garmat Ali in order to study the effect of the plowing depths and manure application on soil moisture content at different soil depths (0-10 (d1), 10-20 (d2), 20-30 (d3), 30-40 (d4), 40-50 (d5) and 50-60 cm (d6)) and two periods (after plowing and after harvesting the sunflower crop). The experiment was conducted using an implement of plowing and manure mixing with soil, which consists of two main parts (two moldboard plows and two subsoilers).The implement was designed and manufactured in the Agriculture machines and Equipment Department in 2015. The treatments used in the study were included two levels of manure application (0 and 45.5 ton ha-1) and two plowing depths of moldboard plow (M) with three plowing depths of subsoiler (S). They were 20 cm of moldboard plow with 20, 30 and 40 cm of subsoiler (M20S20, M20S30 and M20S40), and 30 cm of moldboard plow with 10, 20 and 30 cm of subsoiler (M30S10, M30S20 and M30S30). The results showed that the soil moisture content (MC) was significantly decreased with increasing the plowing depths by the moldboard plows and subsoilers especially after soil plowing. While, the MC significantly increased with increasing the soil depth after the plowing and after harvesting the crop. In contrast, mixing the manure with soil at level 45.5 ton ha-1 by the manufactured implement increased the soil moisture content by 10.73% after the plowing and by 2.33% after the harvesting the sunflower crop compared with untreated soil with manure.

Calibration and modification of impedance probe for near surface soil moisture measurements

2004 ◽  
Vol 84 (2) ◽  
pp. 237-243 ◽  
Author(s):  
T. D. Tsegaye ◽  
W. Tadesse ◽  
T. L. Coleman ◽  
T. J. Jackson ◽  
H. Tewolde
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Soil Moisture Content ◽  
Agricultural Research ◽  
Soil Depth ◽  
Ground Truth ◽  
Shallow Depth ◽  
Research Station ◽  
Near Surface ◽  
Impedance Probe

A reliable and low cost sensor that can measure soil moisture at or near the soil surface is currently not available. The objectives of this study were: (i) to evaluate the possibility of modifying an impedance probe (IP) to measure soil moisture content at a very shallow depth (2–5 cm); and (ii) to compare the soil moisture values obtained using the IP to the values obtained using the traditional gravimetric method. The research was conducted at the Winfred A. Thomas Agricultural Research Station (WTARS) Hazel Green, Alabama. The standard IP that is capable of measuring soil moisture content at 6-cm soil depth was modified to measure soil moisture at 2-, 3-, and 5-cm depths. Using a site and depth-specific calibration technique it provided results that were comparable to the values that were obtained following the traditional gravimetric water content determination protocol. We found that the instrument was very sensitive to changes in soil moisture content and has great potential as a replacement for the gravimetric technique. It allows repetitive measurements of soil moisture content at a very shallow depth with minimal soil disturbance. Fur thermore, the instrument is particularly valuable for providing ground- truth soil moisture contents to validate remotely sensed data. Key words: Soil moisture, remote sensing, impedance probe, ground-truth, validation

Distribution of soil moisture content and its effect on the potential growth of the over-story species in North-East Chalkidiki

2001 ◽  
Vol 66 ◽  
Author(s):  
M. Aslanidou ◽  
P. Smiris
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Soil Moisture Content ◽  
Soil Depth ◽  
Moisture Distribution ◽  
Taxus Baccata ◽  
Mixed Stands ◽  
Potential Growth ◽  
North East ◽  
Soil Moisture Distribution

This  study deals with the soil moisture distribution and its effect on the  potential growth and    adaptation of the over-story species in north-east Chalkidiki. These  species are: Quercus    dalechampii Ten, Quercus  conferta Kit, Quercus  pubescens Willd, Castanea  sativa Mill, Fagus    moesiaca Maly-Domin and also Taxus baccata L. in mixed stands  with Fagus moesiaca.    Samples of soil, 1-2 kg per 20cm depth, were taken and the moisture content  of each sample    was measured in order to determine soil moisture distribution and its  contribution to the growth    of the forest species. The most important results are: i) available water  is influenced by the soil    depth. During the summer, at a soil depth of 10 cm a significant  restriction was observed. ii) the    large duration of the dry period in the deep soil layers has less adverse  effect on stands growth than in the case of the soil surface layers, due to the fact that the root system mainly spreads out    at a soil depth of 40 cm iii) in the beginning of the growing season, the  soil moisture content is    greater than 30 % at a soil depth of 60 cm, in beech and mixed beech-yew  stands, is 10-15 % in    the Q. pubescens  stands and it's more than 30 % at a soil depth of 60 cm in Q. dalechampii    stands.

scholarly journals Draft Requirement of Two Animal - Drawn Institute for Agricultural Research (IAR) Weeders

2020 ◽  
pp. 14-20
Author(s):  
Y. A. Unguwanrimi ◽  
A. M. Sada ◽  
G. N. Ugama ◽  
H. S. Garuba ◽  
A. Ugoani
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Bulk Density ◽  
Soil Moisture Content ◽  
Agricultural Research ◽  
Soil Samples ◽  
Soil Conditions ◽  
Experimental Plot ◽  
Moisture Contents ◽  
Loam Soil

Draft requirements of two animal – drawn (IAR) weeders operating on loam soil were determined in the study. The implements include a straddle row weeder and an emcot attached rotary weeder evaluated under the same soil conditions, using a pair of white Fulani breed of oxen. The animal draft requirement was first estimated from the animal ergonomics measurements. Using area of 0.054 hectare as experimental plot for each implement the draft requirement of each implement was investigated after taking soil samples for soil moisture content and bulk density determinations. The implements tested showed variation in their average draft requirement. The straddle row weeder had the highest value of 338.15 N respectively while the emcot attached rotary weeder had the lowest value of 188.12 N with 47.03%, respectively. The average soil moisture contents and bulk density were 13.0% and 1.46%/cm3, respectively.

Study of Correlation on Unconfined Compressive Strength between Different Soil

2013 ◽  
Vol 838-841 ◽  
pp. 926-929
Author(s):  
Xia Zhao
Keyword(s):  
Compressive Strength ◽  
Soil Moisture ◽  
Moisture Content ◽  
Unconfined Compressive Strength ◽  
Laboratory Tests ◽  
Soil Moisture Content ◽  
Correlation Coefficients ◽  
Friction Angle ◽  
Silty Clay ◽  
Soil Cohesion

Take the silty clay and clay as the research object, the correlation between bulk density, moisture content, cohesion, friction angle and unconfined compressive strength was analyzed using laboratory tests, and the results showed that soil cohesion, friction angle and unconfined compressive strength with good correlation, the correlation coefficients were all above 0.9, while severe and soil moisture content and unconfined compressive strength of correlation is weak, followed by the correlation formulas of the index and unconfined compressive strength were established, these formulas can used to predict the unconfined compressive strength of soil.

scholarly journals Mulch Effect on Growth and Yield of Vine Vegetables

2021 ◽  
Vol 3 (1) ◽  
pp. 143-147
Author(s):  
A. K. M. Quamruzzaman ◽  
Ferdouse Islam ◽  
S. R. Mallick
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Soil Moisture Content ◽  
Agricultural Research ◽  
Fruit Weight ◽  
Fruit Yield ◽  
Growth And Yield ◽  
Research Centre ◽  
Plastic Mulch ◽  
Fruit Number

An experiment was undertaken to identify the suitable mulch paper for different high value vegetables during the winter season of November 2019 to March 2020 at the research farm of Olericulture Division, Horticulture Research Centre, Bangladesh Agricultural Research Institute, Gazipur, Bangladesh. The experiment was randomized complete block design with 3 replications. Three vegetables varieties viz., netted melon, watermelon, cucumber and 3 mulch treatments viz., T1=Silver over black mulch; T2= Black mulch; T3= No mulch were included in this study. Different vegetables responded differently with the changes of mulches irrespective of different characters. Considering relationship between the soil moisture content and fruit number it was clear that fruit number, average fruit weight, fruit length, fruit diameter was strongly related with soil moisture content. The effect of different plastic mulches on fruit weight per plant and yield (t/ha) were significant. Mulching produced higher fruit yield per plant and fruit yield per hectare than for the control, indicating that the mulch had positive effect in generating increased fruit yield. Silver over black plastic mulch produced the highest fruit yield viz., 24.22 t/ha (cucumber), 26.37 t/ha (netted melon), 43.59 t/ha (watermelon) followed by black and no mulches. Obviously, control plot produced the lowest fruit yield.

scholarly journals Effect of Moldboard Plow Types on Soil Physical Properties Under Different Soil Moisture Content and Tractor Speed

2018 ◽  
Vol 31 (1) ◽  
pp. 48-58
Author(s):  
Aqeel J. Nassir
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Physical Properties ◽  
Bulk Density ◽  
Soil Moisture Content ◽  
Penetration Resistance ◽  
Soil Physical Properties ◽  
Soil Porosity ◽  
Soil Penetration Resistance ◽  
Moldboard Plow

An experiment was conducted in fields of Agriculture college, University  of Basrah. The experiment was designed with split-spilt plots in Complete Randomized Blocks Design Treatments included three types of moldboard plows: helical,  semi digger and general –purpose, three soil moisture content levels (10.23,16.47 and 24.68%), and four tractor speed of 0.41, 0.56, 0.86 and 1.21 m sec -1  . The soil  physical properties were determined after plowing soil by using three types of moldboard plow. The results showed that there was significant effect of moldboard plow types, soil moisture content and tractor speed on soil physical properties including bulk density, soil porosity, soil penetration resistance and pulverization ratio. Results also indicated that the effect of interaction among plow types, soil moisture content and tractor speed was significantly on soil penetration resistance and pulverization ratios while it had not significantly effect on bulk density, soil porosity. In general, soil physical properties, had been improved when using high tractor speed and moderate soil moisture content whereas optimal operation was obtained when using general-purpose plow type and  high tractor speed of 1.12 m sec -1 and soil moisture content of 16.47% where this combination gives low bulk density (0.96Mg m-3), high soil porosity (63.90%) high soil pulverization ratio (74%) and low soil penetration resistance (623.47 kN m-2).

Sign in / Sign up

Export Citation Format

Share Document