scholarly journals Isosceles Sets

10.37236/230 ◽  
2009 ◽  
Vol 16 (1) ◽  
Author(s):  
Yury J. Ionin

In 1946, Paul Erdős posed a problem of determining the largest possible cardinality of an isosceles set, i.e., a set of points in plane or in space, any three of which form an isosceles triangle. Such a question can be asked for any metric space, and an upper bound ${n+2\choose 2}$ for the Euclidean space ${\Bbb E}^{n}$ was found by Blokhuis. This upper bound is known to be sharp for $n=1$, 2, 6, and 8. We will consider Erdős' question for the binary Hamming space $H_{n}$ and obtain the following upper bounds on the cardinality of an isosceles subset $S$ of $H_{n}$: if there are at most two distinct nonzero distances between points of $S$, then $|S|\leq{n+1\choose 2}+1$; if, furthermore, $n\geq 4$, $n\ne 6$, and, as a set of vertices of the $n$-cube, $S$ is contained in a hyperplane, then $|S|\leq{n\choose 2}$; if there are more than two distinct nonzero distances between points of $S$, then $|S|\leq{n\choose 2}+1$. The first bound is sharp if and only if $n=2$ or $n=5$; the other two bounds are sharp for all relevant values of $n$, except the third bound for $n=6$, when the sharp upper bound is 12. We also give the exact answer to the Erdős problem for ${\Bbb E}^{n}$ with $n\leq 7$ and describe all isosceles sets of the largest cardinality in these dimensions.

2019 ◽  
Vol 29 (02) ◽  
pp. 95-120 ◽  
Author(s):  
Prosenjit Bose ◽  
André van Renssen

We present improved upper bounds on the spanning ratio of constrained [Formula: see text]-graphs with at least 6 cones and constrained Yao-graphs with 5 or at least 7 cones. Given a set of points in the plane, a Yao-graph partitions the plane around each vertex into [Formula: see text] disjoint cones, each having aperture [Formula: see text], and adds an edge to the closest vertex in each cone. Constrained Yao-graphs have the additional property that no edge properly intersects any of the given line segment constraints. Constrained [Formula: see text]-graphs are similar to constrained Yao-graphs, but use a different method to determine the closest vertex. We present tight bounds on the spanning ratio of a large family of constrained [Formula: see text]-graphs. We show that constrained [Formula: see text]-graphs with [Formula: see text] ([Formula: see text] and integer) cones have a tight spanning ratio of [Formula: see text], where [Formula: see text] is [Formula: see text]. We also present improved upper bounds on the spanning ratio of the other families of constrained [Formula: see text]-graphs. These bounds match the current upper bounds in the unconstrained setting. We also show that constrained Yao-graphs with an even number of cones ([Formula: see text]) have spanning ratio at most [Formula: see text] and constrained Yao-graphs with an odd number of cones ([Formula: see text]) have spanning ratio at most [Formula: see text]. As is the case with constrained [Formula: see text]-graphs, these bounds match the current upper bounds in the unconstrained setting, which implies that like in the unconstrained setting using more cones can make the spanning ratio worse.


2014 ◽  
Vol 2 ◽  
Author(s):  
DAVID DE LAAT ◽  
FERNANDO MÁRIO DE OLIVEIRA FILHO ◽  
FRANK VALLENTIN

AbstractWe give theorems that can be used to upper bound the densities of packings of different spherical caps in the unit sphere and of translates of different convex bodies in Euclidean space. These theorems extend the linear programming bounds for packings of spherical caps and of convex bodies through the use of semidefinite programming. We perform explicit computations, obtaining new bounds for packings of spherical caps of two different sizes and for binary sphere packings. We also slightly improve the bounds for the classical problem of packing identical spheres.


Entropy ◽  
2020 ◽  
Vol 22 (1) ◽  
pp. 78
Author(s):  
Lucian Trifina ◽  
Daniela Tarniceriu ◽  
Jonghoon Ryu ◽  
Ana-Mirela Rotopanescu

In this paper, we obtain upper bounds on the minimum distance for turbo codes using fourth degree permutation polynomial (4-PP) interleavers of a specific interleaver length and classical turbo codes of nominal 1/3 coding rate, with two recursive systematic convolutional component codes with generator matrix G = [ 1 , 15 / 13 ] . The interleaver lengths are of the form 16 Ψ or 48 Ψ , where Ψ is a product of different prime numbers greater than three. Some coefficient restrictions are applied when for a prime p i ∣ Ψ , condition 3 ∤ ( p i − 1 ) is fulfilled. Two upper bounds are obtained for different classes of 4-PP coefficients. For a 4-PP f 4 x 4 + f 3 x 3 + f 2 x 2 + f 1 x ( mod 16 k L Ψ ) , k L ∈ { 1 , 3 } , the upper bound of 28 is obtained when the coefficient f 3 of the equivalent 4-permutation polynomials (PPs) fulfills f 3 ∈ { 0 , 4 Ψ } or when f 3 ∈ { 2 Ψ , 6 Ψ } and f 2 ∈ { ( 4 k L − 1 ) · Ψ , ( 8 k L − 1 ) · Ψ } , k L ∈ { 1 , 3 } , for any values of the other coefficients. The upper bound of 36 is obtained when the coefficient f 3 of the equivalent 4-PPs fulfills f 3 ∈ { 2 Ψ , 6 Ψ } and f 2 ∈ { ( 2 k L − 1 ) · Ψ , ( 6 k L − 1 ) · Ψ } , k L ∈ { 1 , 3 } , for any values of the other coefficients. Thus, the task of finding out good 4-PP interleavers of the previous mentioned lengths is highly facilitated by this result because of the small range required for coefficients f 4 , f 3 and f 2 . It was also proven, by means of nonlinearity degree, that for the considered inteleaver lengths, cubic PPs and quadratic PPs with optimum minimum distances lead to better error rate performances compared to 4-PPs with optimum minimum distances.


2013 ◽  
Vol 22 (6) ◽  
pp. 935-954 ◽  
Author(s):  
MICHA SHARIR ◽  
ADAM SHEFFER

We study cross-graph charging schemes for graphs drawn in the plane. These are charging schemes where charge is moved across vertices of different graphs. Such methods have recently been used to obtain various properties of triangulations that are embedded in a fixed set of points in the plane. We generalize this method to obtain results for various other types of graphs that are embedded in the plane. Specifically, we obtain a new bound ofO*(187.53N) (where theO*(⋅) notation hides polynomial factors) for the maximum number of crossing-free straight-edge graphs that can be embedded in any specific set ofNpoints in the plane (improving upon the previous best upper bound 207.85Nin Hoffmann, Schulz, Sharir, Sheffer, Tóth and Welzl [14]). We also derive upper bounds for numbers of several other types of plane graphs (such as connected and bi-connected plane graphs), and obtain various bounds on the expected vertex-degrees in graphs that are uniformly chosen from the set of all crossing-free straight-edge graphs that can be embedded in a specific point set.We then apply the cross-graph charging-scheme method to graphs that allow certain types of crossings. Specifically, we consider graphs with no set ofkpairwise crossing edges (more commonly known ask-quasi-planar graphs). Fork=3 andk=4, we prove that, for any setSofNpoints in the plane, the number of graphs that have a straight-edgek-quasi-planar embedding overSis only exponential inN.


2016 ◽  
Vol 55 ◽  
pp. 653-683 ◽  
Author(s):  
Xiaoyuan Zhu ◽  
Changhe Yuan

Most Relevant Explanation (MRE) is an inference task in Bayesian networks that finds the most relevant partial instantiation of target variables as an explanation for given evidence by maximizing the Generalized Bayes Factor (GBF). No exact MRE algorithm has been developed previously except exhaustive search. This paper fills the void by introducing two Breadth-First Branch-and-Bound (BFBnB) algorithms for solving MRE based on novel upper bounds of GBF. One upper bound is created by decomposing the computation of GBF using a target blanket decomposition of evidence variables. The other upper bound improves the first bound in two ways. One is to split the target blankets that are too large by converting auxiliary nodes into pseudo-targets so as to scale to large problems. The other is to perform summations instead of maximizations on some of the target variables in each target blanket. Our empirical evaluations show that the proposed BFBnB algorithms make exact MRE inference tractable in Bayesian networks that could not be solved previously.


1988 ◽  
Vol 103 (3) ◽  
pp. 451-456 ◽  
Author(s):  
Morwen B. Thistlethwaite

In the recent article [2], a kind of connected link diagram called adequate was investigated, and it was shown that the Jones polynomial is never trivial for such a diagram. Here, on the other hand, upper bounds are considered for the breadth of the Jones polynomial of an arbitrary connected diagram, thus extending some of the results of [1,4,5]. Also, in Theorem 2 below, a characterization is given of those connected, prime diagrams for which the breadth of the Jones polynomial is one less than the number of crossings; recall from [1,4,5] that the breadth equals the number of crossings if and only if that diagram is reduced alternating. The article is concluded with a simple proof, using the Jones polynomial, of W. Menasco's theorem [3] that a connected, alternating diagram cannot represent a split link. We shall work with the Kauffman bracket polynomial 〈D〉 ∈ Z[A, A−1 of a link diagram D.


2012 ◽  
Vol 22 (06) ◽  
pp. 499-515
Author(s):  
THOMAS BINDER ◽  
THOMAS MARTINETZ

For a finite set of points X on the unit hypersphere in ℝd we consider the iteration ui+1 = ui + χi, where χi is the point of X farthest from ui. Restricting to the case where the origin is contained in the convex hull of X we study the maximal length of ui. We give sharp upper bounds for the length of ui independently of X. Precisely, this upper bound is infinity for d ≥ 3 and [Formula: see text] for d = 2.


1982 ◽  
Vol 104 (3) ◽  
pp. 231-237 ◽  
Author(s):  
B. Avitzur ◽  
C. J. Van Tyne

In this series of papers, the generalized ring forming process is analyzed for a Mises’ material, using an upper bound approach. This analysis allows the motivation for the process to be supplied on any surface, and permits the application of external surface tractions on any of the other surfaces of the ring. Because of the generality of the analysis, the range of valves that the radial flow parameter (i.e. the neutral radius) can possess is broadened. Under certain circumstances, the traditionally defined neutral radius becomes an imaginary (i.e. complex) number. An introduction to the approach and the calculation of the individual power terms is presented in Part 1. The analytical equations for the ring forming process are developed in Part 2. Application of the general analysis is made to the specific cases of constrained ring forgings and deformation of a flange during deep drawing in the third part of the series.


2021 ◽  
Vol 2021 (12) ◽  
Author(s):  
J. Mourad ◽  
A. Sagnotti

Abstract We investigate in detail solutions of supergravity that involve warped products of flat geometries of the type Mp+1× R × TD−p−2 depending on a single coordinate. In the absence of fluxes, the solutions include flat space and Kasner-like vacua that break all supersymmetries. In the presence of a symmetric flux, there are three families of solutions that are characterized by a pair of boundaries and have a singularity at one of them, the origin. The first family comprises supersymmetric vacua, which capture a universal limiting behavior at the origin. The first and second families also contain non-supersymmetric solutions whose behavior at the other boundary, which can lie at a finite or infinite distance, is captured by the no-flux solutions. The solutions of the third family have a second boundary at a finite distance where they approach again the supersymmetric backgrounds. These vacua exhibit a variety of interesting scenarios, which include compactifications on finite intervals and p + 1-dimensional effective theories where the string coupling has an upper bound. We also build corresponding cosmologies, and in some of them the string coupling can be finite throughout the evolution.


2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Maha Youssef ◽  
Hany A. El-Sharkawy ◽  
Gerd Baumann

Lebesgue constant for Lagrange approximation at Sinc points will be examined. We introduce a new barycentric form for Lagrange approximation at Sinc points. Using Thiele’s algorithm we show that the Lebesgue constant grows logarithmically as the number of interpolation Sinc points increases. A comparison between the obtained upper bound of Lebesgue constant using Sinc points and other upper bounds for different set of points, like equidistant and Chebyshev points, is introduced.


Sign in / Sign up

Export Citation Format

Share Document