Einfluss der Abrichtgrößen beim Schleifen*/Influence of dressing parameters on the grinding process - Systematic research of dressing parameters on workpiece roughness and surface integrity

2016 ◽  
Vol 106 (01-02) ◽  
pp. 44-50
Author(s):  
T. Lierse ◽  
B. Karpuschewski ◽  
T. R. Kaul
Keyword(s):  
Aluminum Oxide ◽  
Surface Integrity ◽  
Cvd Diamond ◽  
Grinding Wheel ◽  
Systematic Research ◽  
Grinding Process ◽  
Wheel Topography ◽  
Grinding Wheel Topography

Dieser Beitrag zeigt, dass die durch die Abrichtparameter erzeugte Schleifscheibentopographie nicht nur die Oberflächengüte des Werkstücks, sondern auch dessen Eigenspannungszustand in der Werkstückrandzone in weiten Grenzen verändert. Die Untersuchungen zum Abrichten von Korundschleifscheiben mit einer CVD-Diamantformrolle stellen den Zusammenhang zwischen dem Abrichten unterschiedlicher Schleifscheiben zur Bauteilqualität in Form der Oberflächenrautiefe und randzonennahen Eigenspannungen her.   The quality of the workpiece rim is changed by every grinding process. The grinding wheel topography created by the dressing process has not only influence on the workpiece roughness but also on the surface integrity. The pointed research using aluminum oxide abrasive wheels dressed by CVD diamond dressing discs shows a correlation between the dressing parameters, the workpiece roughness and the surface integrity.

Quantitative Beschreibung der Schleifscheibentopographie*/Quantitative description of the grinding wheel topography. Application-oriented characterization of the grinding wheel topography based on quantitative parameters

2018 ◽  
Vol 108 (06) ◽  
pp. 441-447
Author(s):  
S. Barth ◽  
J. Röttger ◽  
D. Trauth ◽  
P. Mattfeld ◽  
T. Bergs ◽  
...  
Keyword(s):  
Mechanical Load ◽  
Quantitative Description ◽  
Grinding Wheel ◽  
Grinding Process ◽  
Surface Zone ◽  
Quantitative Parameters ◽  
Wheel Topography ◽  
Grinding Wheel Topography ◽  
Lack Of Knowledge

In der Schleiftechnik besteht ein erhebliches Wissensdefizit über den Einfluss der Schleifscheibentopographie auf das Schleifprozessverhalten und die Ausbildung der Bauteilrandzoneneigenschaften. Ziel der Untersuchungen war daher die Identifikation und Analyse quantitativer Kenngrößen zur Beschreibung der geometrischen Schleifscheibentopographieeigenschaften. Diese Kenngrößen ermöglichten fortführend die Modellierung des thermo-mechanischen Belastungskollektivs im Schleifprozess in Abhängigkeit von der Schleifscheibentopographie.   In grinding technology, there is a considerable lack of knowledge about the influence of the grinding wheel topography on the process behaviour and the formation of the component surface zone properties. Therefore, the aim of the investigations was to investigate quantitative parameters for the description of the geometrical topography properties. These parameters enable to model the thermo-mechanical load collective in the grinding process as a function of the grinding wheel topography.

scholarly journals Effects of the Grinding Wheel Eccentricity and Waviness on the Dynamics of Tool Grinding

2017 ◽  
Vol 869 ◽  
pp. 128-138
Author(s):  
Kristin M. de Payrebrune ◽  
Matthias Kröger
Keyword(s):  
System Dynamics ◽  
Complex Dynamics ◽  
Grinding Wheel ◽  
Process Conditions ◽  
Grinding Process ◽  
Integrated Simulation ◽  
Wheel Topography ◽  
Grinding Wheel Topography ◽  
Excitation Frequencies ◽  
Tool Grinding

The complex dynamics of grinding repeatedly cause critical or unstable process conditions. For a better understanding and prediction of such occurrences, the dominant excitation phenomena need to be identified and their interrelation with the system dynamics have to be analyzed.Based on measurements of the excited frequencies in several operation modes of the grinding machine, the grinding wheel rotation is identified as a major excitation source. Further analysis of the grinding wheel surface displays three main components that define the excitation frequencies of the system; these are the eccentricity, waviness and roughness (also named wheel topography). Moreover, the wheel topography and thus the excitation frequencies can change over time due to excessive wear.Following the experimental results, a grinding wheel topography and wear model are developed and included in an integrated simulation of tool grinding. The analysis of the calculated cutting forces in the frequency domain confirm the excitation due to the grinding wheel topography.Firstly, this work has extracted the grinding wheel as a prominent excitation mechanism and reproduced it with the developed grinding model. Secondly, we have evidence that a complete description of the complex grinding process is only possible when considering the interdependence between system dynamics, wheel kinematics and the grinding process.

Modeling of the Grinding Wheel Topography Depending on the Recipe-Dependent Volumetric Composition

2017 ◽  
Vol 140 (2) ◽  
Author(s):  
Sebastian Barth ◽  
Michael Rom ◽  
Christian Wrobel ◽  
Fritz Klocke
Keyword(s):  
Research Work ◽  
Distribution Functions ◽  
Grinding Wheel ◽  
Grinding Process ◽  
Grinding Wheels ◽  
Edge Zone ◽  
Application Behavior ◽  
Wheel Topography ◽  
Grinding Wheel Topography ◽  
Grinding Tool

The prediction of the grinding process result, such as the workpiece surface quality or the state of the edge zone depending on the used grinding wheel is still a great challenge for today's manufacturers and users of grinding tools. This is mainly caused by an inadequate predictability of force and temperature affecting the process. The force and the temperature strongly depend on the topography of the grinding wheel, which comes into contact with the workpiece during the grinding process. The topography of a grinding wheel mainly depends on the structure of the grinding wheel, which is determined by the recipe-dependent volumetric composition of the tool. So, the structure of a grinding tool determines its application behavior strongly. As result, the knowledge-based prediction of the grinding wheel topography and its influence on the machining behavior will only be possible if the recipe-dependent grinding wheel structure is known. This paper presents an innovative approach for modeling the grinding wheel structure and the resultant grinding wheel topography. The overall objective of the underlying research work was to create a mathematical-generic grinding tool model in which the spatial arrangement of the components, grains, bond, and pores, is simulated in a realistic manner starting from the recipe-dependent volumetric composition of a grinding wheel. This model enables the user to determine the resulting grinding wheel structure and the grinding wheel topography of vitrified and synthetic resin-bonded cubic boron nitride (CBN) grinding wheels depending on their specification and thus to predict their application behavior. The originality of the present research results is a generic approach for the modeling of grinding tools, which takes into account the entire grinding wheel structure to build up the topography. Therefore, original mathematical methods are used. The components of grinding wheels are analyzed, and distribution functions of the component's positions in the tools are determined. Thus, the statistical character of the grinding wheel structure is taken into account in the developed model. In future, the presented model opens new perspectives in order to optimize and to increase the productivity of grinding processes.

Kornbruchverhalten beim Abrichten von CBN/Fracture behavior of CBN during dressing – Analysis of the single grain dressing process of CBN

2021 ◽  
Vol 111 (06) ◽  
pp. 408-413
Author(s):  
Marius Ohlert ◽  
Sebastian Prinz ◽  
Sebastian Barth ◽  
Thomas Bergs
Keyword(s):  
Fracture Behavior ◽  
Grinding Wheel ◽  
Grinding Process ◽  
Wheel Topography ◽  
Grinding Wheel Topography ◽  
Single Grain

Die Schleifscheibentopographie, welche durch den Abrichtprozess erzeugt wird, ist ein wesentlicher Einflussfaktor für das Prozessergebnis beim Schleifen. Das Bruchverhalten der Kornwerkstoffe beim Abrichten hängt nicht nur von den Abrichtparametern, sondern auch von dem Korntyp der Schleifscheibe ab. Daher wurden Abrichtversuche an einzelnen CBN-Körnern durchgeführt, um den Einfluss der Abrichtparameter und des Korntyps auf das Prozessergebnis zu ermitteln.   The grinding wheel topography generated by the dressing process is a factor of major impact on the result of the grinding process. The fracture behavior of the grains of the grinding wheel during dressing not only depends on the dressing parameters but also on the grain type of the grinding wheel. Therefore, dressing tests of single CBN grains were conducted to determine how the dressing parameters and the grain type influence the process result.

Modeling of the Grinding Wheel Topography Depending on the Recipe-Dependent Volumetric Composition

2017 ◽  
Author(s):  
Fritz Klocke ◽  
Sebastian Barth ◽  
Michael Rom ◽  
Christian Wrobel
Keyword(s):  
Spatial Arrangement ◽  
Distribution Functions ◽  
Grinding Wheel ◽  
Grinding Process ◽  
Grinding Wheels ◽  
Mathematical Methods ◽  
Edge Zone ◽  
Application Behavior ◽  
Wheel Topography ◽  
Grinding Wheel Topography

The prediction of the grinding process result, such as the workpiece surface quality or the state of the edge zone depending on the used grinding wheel is a great challenge for todays manufacturers and users of grinding tools. This is mainly caused by inadequate predictability of the forces and temperatures acting in the process, which depend on the topography of the grinding wheel coming into contact with the workpiece during the grinding process. The topography of a grinding wheel depends, beside the dressing process, on the structure of the grinding wheel, which is determined by its recipe-dependent volumetric composition. The structure of a grinding tool therefore determines its application behavior strongly. As a result, the knowledge-based prediction of the grinding wheel topography and its influence on the machining behavior is only possible if the recipe-dependent grinding wheel structure is known. In this paper, an innovative approach for modeling the grinding wheel structure and the resultant grinding wheel topography is discussed. The overall objective of the underlying research project was to create a mathematical-generic grinding wheel model in which the spatial arrangement of the components grains, bond and pores is simulated in a realistic manner starting from the recipe-dependent volumetric composition of a grinding wheel. With this model it is possible to determine the resulting grinding wheel structure and the grinding wheel topography of vitrified and synthetic resin-bonded CBN grinding wheels and thus to predict their application behavior. The originality of the present research results is a generic approach for the modeling of grinding wheels, taking into account the entire grinding wheel structure and build up the topography based on it. Using original mathematical methods, the components of grinding wheels were analyzed and distribution functions of the components were determined. Thus the statistical character of the grinding wheel structure was taken into account. In future, the presented model opens new perspectives in order to optimize and to increase the productivity of grinding processes.

Experiment Research on Grinding of Optical Glass with Indigenously Developed Monolayer Brazed Diamond Grinding Wheel

2010 ◽  
Vol 136 ◽  
pp. 279-283 ◽  
Author(s):  
Bei Zhang ◽  
Hong Jun Xu ◽  
Yu Can Fu ◽  
Hong Hua Su
Keyword(s):  
Optical Glass ◽  
Removal Rate ◽  
Ground Surface ◽  
Grinding Wheel ◽  
Grinding Process ◽  
Diamond Grinding Wheel ◽  
Diamond Grinding ◽  
Short Service Life ◽  
Wheel Topography ◽  
Grinding Wheel Topography

Conventional grinding of optical glass will normally result in not only much lower material removal rate but also short service life of grinding tools, which causes the high fabrication cost of optical glass. This paper focuses on the precision grinding of optical glass with the indigenously developed monolayer brazed diamond grinding wheel. Before grinding process a precision dressing is conduct. The dressed grinding wheel topography is observed. Through precision dressing the grinding process achieves moderate surface finish as well as ensures certain grinding efficiency. The ground surface of the optical glass workpiece is made up of micro-pits and glazing zones and the obtained surface roughness variation with the process parameters is analyzed. The experiment shows that the developed diamond grinding wheel is suitable to the application of optical glass machining.

Study on Edge Contact Area and Surface Integrity of Workpiece in Point Grinding Process

2009 ◽  
Vol 407-408 ◽  
pp. 577-581
Author(s):  
Shi Chao Xiu ◽  
Zhi Jie Geng ◽  
Guang Qi Cai
Keyword(s):  
Surface Integrity ◽  
Contact Area ◽  
High Speed ◽  
Ground Surface ◽  
Depth Of Cut ◽  
Grinding Wheel ◽  
Grinding Process ◽  
Edge Contact ◽  
Cylindrical Grinding ◽  
Theoretic Foundations

During cylindrical grinding process, the geometric configuration and size of the edge contact area between the grinding wheel and workpiece have the heavy effects on the workpiece surface integrity. In consideration of the differences between the point grinding and the conventional high speed cylindrical grinding, the geometric and mathematic models of the edge contact area in point grinding were established. Based on the models, the numerical simulation for the edge contact area was performed. By means of the point grinding experiment, the effect mechanism of the edge contact area on the ground surface integrity was investigated. These will offer the applied theoretic foundations for optimizing the point grinding angles, depth of cut, wheel and workpiece speed, geometrical configuration and size of CBN wheel and some other grinding parameters in point grinding process.

Einfluss der Schärfparameter auf die Schleifscheibentopographie*/Influence of the sharpening parameters on the grinding wheel topography

2019 ◽  
Vol 109 (07-08) ◽  
pp. 582-588
Author(s):  
E. Uhlmann ◽  
A. Muthulingam
Keyword(s):  
Economic Efficiency ◽  
Experimental Investigations ◽  
Grinding Wheel ◽  
Conditioning Process ◽  
Wheel Topography ◽  
Process Reliability ◽  
Grinding Wheel Topography ◽  
The Relationship

Einen wesentlichen Bestandteil der Schleiftechnik ist der Konditionierprozess zur Herstellung der Schleifscheibenform und -schnittigkeit. Durch das Schärfen wird die Bindung zurückgesetzt und der notwendige Schleifkornüberstand und Spanraum geschaffen. Ein CNC-gesteuerter Schärfprozess kann zur prozesssicheren und ressourceneffizienten Einstellung der gewünschten Schleifbelagstopographie genutzt werden. Umfangreiche Schärfuntersuchungen sollen hierbei Aufschluss über die Wirkzusammenhänge zwischen Schärfeinstellgrößen und Schärfergebnis geben.   An essential part of grinding technology is the conditioning process for the generation of the grinding wheel shape and of a sharp topography. Through the sharpening process the required cutting grains are exposed from the bond and sufficient chip space is ensured by putting back the bonding. A CNC-controlled sharpening process can lead to an improvement in process reliability and the economic efficiency. Extensive experimental investigations were carried out to determine the relationship between the sharpening parameters and the sharpening result.

Sign in / Sign up

Export Citation Format

Share Document