Removal of copper (Cu2+) ions from aqueous solutions by adsorption on activated macadamia carbon using H3PO4 activating agent

2020 ◽  
pp. 166-172
Keyword(s):  
Activated Carbon ◽  
Aqueous Solutions ◽  
Chemical Agent ◽  
Burning Time ◽  
Optimal Conditions ◽  
Optimal Temperature ◽  
Copper Metal ◽  
Activating Agent ◽  
Optimal Temperature Condition

The study aims to investigate the possibility of processing copper metal (Cu2+) with activated carbon prepared from macadamia shell. Activated carbon is prepared from Macadamia shell by chemical agent H3PO4 with coke ratio: H3PO4 = 1:1, optimal temperature condition is 5000C and burning time is 60 minutes. Using the assumed Cu2+ metal treats materials in the laboratory with a concentration of 30ppm. The research to result ability material adsorbed Cu2+ metal achieve good performance 95.92% handle, corresponding to the concentration of Cu2+ reduced from 30 mg/l to 1.2mg/l in optimal conditions is pH = 4.5 , dosage 1.8g/l, time 30 minutes. The results showed that activated carbon prepared from macadamia husk with chemical agent H3PO4 was capable of treating copper metal in wastewater.

scholarly journals Survey of zinc metal processing capability with coal-chemistry activated carbon by chemical K2CO3

2019 ◽  
pp. 133-138
Keyword(s):  
Activated Carbon ◽  
Seed Coat ◽  
Chemical Agent ◽  
Distilled Water ◽  
Burning Time ◽  
Optimal Temperature ◽  
Coal Chemistry ◽  
Survey Results ◽  
Metal Processing ◽  
Optimal Temperature Condition

Seed coat macadamia preparation of activated carbon with chemical agent K2CO3 from macadamia shells as per ratio: K2CO3: distilled water = 1:1:10ml, optimal temperature condition 6500C and burning time 60 minutes. Efficiency removal of zinc (II) in wastewater efficiency (53.42%) with the concentration of 25ppm, conducted a survey at pH = 4.5 with 1.8g/l of carbon, treated in 100 minutes. Survey results have similarities with other studies and are applicable to application removal of zinc (II) in wastewater.

Removal of Cu2+ In sewage with macadamia coal activated by K2CO3

2020 ◽  
pp. 180-186
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Wastewater Treatment ◽  
Activated Carbon ◽  
Carbon Material ◽  
Burning Time ◽  
Optimal Conditions ◽  
Research Results ◽  
Survey Results

Investigation of the possibility of treating wastewater containing Cu2+ heavy metal with activated carbon material prepared from macadamia husk with activating K2CO3 in Optimal conditions such as temperature 6500C and burning time is 60 minutes. Survey results show that coal with the ability to handle heavy metals is best at 84.02% in optimal conditions such as pH=5 and time. Baking is 30 minutes. The results show similarities with other research results and are applicable to wastewater treatment Cu2+.

scholarly journals Iron-modified activated carbon derived from agro-waste for enhanced dye removal from aqueous solutions

Heliyon ◽  
2021 ◽  
pp. e07191
Author(s):  
Fateme Barjasteh-Askari ◽  
Mojtaba Davoudi ◽  
Maryam Dolatabadi ◽  
Saeid Ahmadzadeh
Keyword(s):  
Activated Carbon ◽  
Aqueous Solutions ◽  
Dye Removal ◽  
Modified Activated Carbon

scholarly journals Effects of activated carbon properties on the adsorption of naphthalene from aqueous solutions

2007 ◽  
Vol 253 (13) ◽  
pp. 5741-5746 ◽  
Author(s):  
C.O. Ania ◽  
B. Cabal ◽  
C. Pevida ◽  
A. Arenillas ◽  
J.B. Parra ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Aqueous Solutions

scholarly journals Activated Carbon Open Circuit Potential Shifts in Aqueous Solutions

2019 ◽  
Vol 11 (20) ◽  
pp. 19-28 ◽  
Author(s):  
Mikhail M. Goldin ◽  
Gary J. Blanchard ◽  
Alexander G. Volkov ◽  
Mogely S. Khubutiya ◽  
Vladimir A. Kolesnikov ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Aqueous Solutions ◽  
Open Circuit Potential ◽  
Open Circuit ◽  
Potential Shifts

Preparation and Characterization of Activated Carbon Fibers from Jute Fibers by Phosphoric Acid Activation

2012 ◽  
Vol 184-185 ◽  
pp. 1110-1113 ◽  
Author(s):  
Li Fen He ◽  
Qi Xia Liu ◽  
Tao Ji ◽  
Qiang Gao
Keyword(s):  
Activated Carbon ◽  
Carbon Fiber ◽  
Phosphoric Acid ◽  
Carbon Fibers ◽  
Activated Carbon Fibers ◽  
Optimum Conditions ◽  
Activation Time ◽  
Activation Temperature ◽  
Jute Fibers ◽  
Activating Agent

Various jute-based activated carbon fibers were prepared by using jute fibers as raw materials and phosphoric acid as activating agent. The effects of three main factors such as concentration of activating agent, activation temperature and activation time on the yield and adsorptive properties of active carbon fibers were investigated via orthogonal experiments. The surface physical morphology of jute-based activated carbon fiber was also observed by using Scanning Electron Microscope. Results showed that the optimum conditions were phosphoric acid concentration of 4 mol/L, activation temperature of 600 °C and activation time of 1h. The yield, iodine number and amount of methylene blue adsorption of the active carbon fiber prepared under optimum conditions were 37.99 %, 1208.87 mg/g and 374.65 mg/g, respectively.

scholarly journals Oxytetracycline Adsorption from Aqueous Solutions on Commercial and High-Temperature Modified Activated Carbons

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3481
Author(s):  
Joanna Lach ◽  
Agnieszka Ociepa-Kubicka ◽  
Maciej Mrowiec
Keyword(s):  
Activated Carbon ◽  
Aqueous Solutions ◽  
Activated Carbons ◽  
Electricity Consumption ◽  
Solution Ph ◽  
Carbon Modification ◽  
Modification Method ◽  
Flow Through ◽  
Proposed Modification ◽  
Modified Activated Carbons

The aim of the work was to evaluate the possibility of using commercial and modified activated carbons for the removal of oxytetracycline from aqueous solutions. The kinetics and statics of adsorption as well as the effect of the activated carbon dose and solution pH on the efficiency of the oxytetracycline adsorption were analyzed. Based on the study of oxytetracycline adsorption isotherms, the activated carbons were ranked in the following order: F-300 > WG-12 > Picabiol > ROW08 > WACC 8 × 30 > F-100 > WAZ 0.6–2.4. The most effective activated carbons were characterized by large specific surfaces. The best matching results were obtained for: Redlich–Peterson, Thot and Jovanovic models, and lower for the most frequently used Freundlich and Langmuir models. The adsorption proceeded better from solutions with pH = 6 than with pH = 3 and 10. Two ways of modifying activated carbon were also assessed. A proprietary method of activated carbon modification was proposed. It uses the heating of activated carbon as a result of current flow through its bed. Both carbons modified at 400 °C in the rotary kiln and on the proprietary SEOW (Joule-heat) modification stand enabled to obtain adsorbents with higher and comparable monolayer capacities. The advantage of the proposed modification method is low electricity consumption.

Sign in / Sign up

Export Citation Format

Share Document