scholarly journals Oxytetracycline Adsorption from Aqueous Solutions on Commercial and High-Temperature Modified Activated Carbons

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3481
Author(s):  
Joanna Lach ◽  
Agnieszka Ociepa-Kubicka ◽  
Maciej Mrowiec
Keyword(s):  
Activated Carbon ◽  
Aqueous Solutions ◽  
Activated Carbons ◽  
Electricity Consumption ◽  
Solution Ph ◽  
Carbon Modification ◽  
Modification Method ◽  
Flow Through ◽  
Proposed Modification ◽  
Modified Activated Carbons

The aim of the work was to evaluate the possibility of using commercial and modified activated carbons for the removal of oxytetracycline from aqueous solutions. The kinetics and statics of adsorption as well as the effect of the activated carbon dose and solution pH on the efficiency of the oxytetracycline adsorption were analyzed. Based on the study of oxytetracycline adsorption isotherms, the activated carbons were ranked in the following order: F-300 > WG-12 > Picabiol > ROW08 > WACC 8 × 30 > F-100 > WAZ 0.6–2.4. The most effective activated carbons were characterized by large specific surfaces. The best matching results were obtained for: Redlich–Peterson, Thot and Jovanovic models, and lower for the most frequently used Freundlich and Langmuir models. The adsorption proceeded better from solutions with pH = 6 than with pH = 3 and 10. Two ways of modifying activated carbon were also assessed. A proprietary method of activated carbon modification was proposed. It uses the heating of activated carbon as a result of current flow through its bed. Both carbons modified at 400 °C in the rotary kiln and on the proprietary SEOW (Joule-heat) modification stand enabled to obtain adsorbents with higher and comparable monolayer capacities. The advantage of the proposed modification method is low electricity consumption.

scholarly journals Adsorption of Ammonia Ions and Ammonium from Aqueous Solutions on Modified Activated Carbons

2008 ◽  
Vol 3 (2) ◽  
pp. 55-57
Author(s):  
T. Lupashcu ◽  
M. Ciobanu
Keyword(s):  
Activated Carbon ◽  
Phosphoric Acid ◽  
Aqueous Solutions ◽  
Adsorption Process ◽  
Activated Carbons ◽  
Modified Activated Carbons

The adsorption process of ammonia ions and ammonium from aqueous solutions on the intact activated carbon obtained from nutshells through activation with phosphoric acid and oxidized with H2O2 and later impregnated with salt containing Co2+, Ag+, Ni2+, Cu2+, has been investigated. The efficiency of ammonia ions and ammonium elimination from various water categories, using both activated carbon (the intact CAN-7 and CAN-7 oxidized with H2O2 and impregnated with Co2+, Ag+, Ni2+, Cu2+ ions) has been demonstrated.

scholarly journals An alternative low-cost adsorbent for gold recovery from cyanide-leached liquors: Adsorption isotherm and kinetic studies

2018 ◽  
Vol 37 (1-2) ◽  
pp. 3-23 ◽  
Author(s):  
Refiloe Tsolele ◽  
Fanyana Moses Mtunzi ◽  
Michael John Klink ◽  
Vusumzi Emmanuel Pakade
Keyword(s):  
Activated Carbons ◽  
Selective Adsorption ◽  
Low Cost ◽  
Kinetic Studies ◽  
Agitation Speed ◽  
Gold Recovery ◽  
Attractive Alternative ◽  
Solution Ph ◽  
Initial Concentration ◽  
Modified Activated Carbons

Pristine Macadamia nutshell-based activated carbons were chemically oxidized with different concentrations of H3PO4 and HNO3 to increase their surface adsorption properties and further explore if they could be an attractive alternative low-cost adsorbent for gold recovery from cyanide-leached liquors. The modified activated carbons were labeled MACN20, MACN40 and MACN55 to signify the materials prepared from 20%, 40% and 55% (v/v) HNO3, respectively. Similar nomenclature was followed for H3PO4-modified activated carbons. Brunauer-Emmet-Teller, scanning electron microscopy, thermogravimetric analysis, Fourier transform infrared spectroscopy, elemental analysis and X-ray diffraction spectroscopy were used to characterize the prepared activated carbons. The physical properties were attained through determining attrition, ash content, volatile matter and moisture content of all the activated carbons. Various parameters that affect selective adsorption such as the effect of initial concentration, time, agitation speed, interfering species and the dose of the adsorbent were investigated. Optimal parameters for gold ion adsorption were as follows: solution pH, 10; contact time, 6 h; agitation speed, 150 r/min; sorbent amount, 4 g and initial concentration, 5.5 mg/L. The observed selectivity order was not the same for all the adsorbents, but the adsorption of gold was found to be mostly influenced in the presence of nickel and least influenced by copper. MACN55 was found to be the most efficient adsorbent with 74% of gold adsorption from a real-world sample and displayed a similar performance to coconut-based activated carbons.

Adsorption of Soluble Metal Ions from Red Mud by Modified Activated Carbon

2008 ◽  
Vol 368-372 ◽  
pp. 1541-1544 ◽  
Author(s):  
Hua Lei Zhou ◽  
Dong Yan Li ◽  
Guo Zhuo Gong ◽  
Ya Jun Tian ◽  
Yun Fa Chen
Keyword(s):  
Activated Carbon ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Red Mud ◽  
Activated Carbons ◽  
Valuable Metal ◽  
Surface Areas ◽  
Alumina Industry ◽  
Modified Activated Carbons ◽  
Almost All

Activated carbon was employed as the adsorption carrier for the metal ions in HCl solution of red mud, a solid waste produced in alumina industry. To improve the adsorption capacity to valuable metal ions, the activated carbon was modified by chemicals including HNO3, H2O2, H2SO4, H3PO4, NH3, Na2CO3, and tri-butyl phosphate (TBP). It was found that the modifications contributed the high adsorption capacity to almost all metal ions we focused on. In the case of TBP, remarkably higher adsorption capacity and selectivity of Sc3+ was observed. The correlation between the surface areas, IR spectra of those chemically modified activated carbons and adsorption was schemed.

Performances of metals modified activated carbons for fluoride removal from aqueous solutions

2020 ◽  
Vol 754 ◽  
pp. 137705
Author(s):  
Soumia Bakhta ◽  
Zahra Sadaoui ◽  
Ulla Lassi ◽  
Henrik Romar ◽  
Riikka Kupila ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Activated Carbons ◽  
Fluoride Removal ◽  
Modified Activated Carbons

Modification of Activated Carbon and its Application on Adsorption of UDMH Gas

2013 ◽  
Vol 634-638 ◽  
pp. 1026-1030 ◽  
Author(s):  
Huan Chun Wang ◽  
Xiao Li Gou ◽  
Xiao Meng Lv
Keyword(s):  
Activated Carbon ◽  
High Temperature ◽  
Transition Metal ◽  
Surface Structure ◽  
Functional Groups ◽  
Room Temperature ◽  
Activated Carbons ◽  
Metal Solution ◽  
Modified Activated Carbons

Two kinds of modified activated carbons were prepared by dipping with Zn(NO3)2 solution and by reducing in the atmosphere of N2 at high temperature respectively, which were characterized by FTIR,DSC,SEM and EDS. The surface structure was strongly changed in the process, along with the changes of chemical functional groups. The results of adsorption experiments revealed that the adsorbent capacities of UDMH gas at room temperature were enhanced obviously by modification compared with the raw activated carbon, especially dipped by transition metal solution. The mechanism probably involved was also discussed.

Membrane-free electrochemical deoxygenation of aqueous solutions using symmetric activated carbon electrodes in flow-through cells

2019 ◽  
Vol 297 ◽  
pp. 163-172 ◽  
Author(s):  
Nicolas E. Holubowitch ◽  
Ayokunle Omosebi ◽  
Xin Gao ◽  
James Landon ◽  
Kunlei Liu
Keyword(s):  
Activated Carbon ◽  
Aqueous Solutions ◽  
Carbon Electrodes ◽  
Flow Through

scholarly journals Removal of Methylene Blue from Waste Water Using Activated Carbon Prepared from Rice Husk

2012 ◽  
Vol 60 (2) ◽  
pp. 185-189 ◽  
Author(s):  
Mohammad Arifur Rahman ◽  
S. M. Ruhul Amin ◽  
A. M. Shafiqul Alam
Keyword(s):  
Waste Water ◽  
Methylene Blue ◽  
Activated Carbon ◽  
Aqueous Solutions ◽  
Rice Husk ◽  
Flow Rate ◽  
Activated Carbons ◽  
Low Cost ◽  
Waste Water Treatment ◽  
Blue Dye

The possible utilization of rice husk activated carbon as an adsorbent for the removal of methylene blue dye from aqueous solutions has been investigated. In this study, activated carbons, prepared from low-cost rice husk by sulfuric acid and zinc chloride activation, were used as the adsorbent for the removal of methylene blue, a basic dye, from aqueous solutions. Effects of various experimental parameters, such as adsorbent dosage and particle size, initial dye concentration, pH and flow rate were investigated in column process. The maximum uptakes of methylene blue by activated rice husk carbon at optimized conditions (particle sizes: 140 ?m; Flow rate: 1.4 mL/min; pH: 10.0; initial volume of methylene blue: 50 mL and initial concentration of methylene blue: 4.0 mg/L etc.) were found to 97.15%. The results indicate that activated carbon of rice husk could be employed as low-cost alternatives to commercial activated carbon in waste water treatment for the removal of basic dyes. This low cost and effective removal method may provide a promising solution for the removal of crystal violet dye from wastewater.DOI: http://dx.doi.org/10.3329/dujs.v60i2.11491 Dhaka Univ. J. Sci. 60(2): 185-189, 2012 (July)

Sign in / Sign up

Export Citation Format

Share Document