scholarly journals COPPER HEXACYANOFERRATE (II): SYNTHESIS, CHARACTERIZATION, AND CESIUM, STRONTIUM ADSORBENT APPLICATION

2021 ◽  
Author(s):  
Dinh Trung Nguyen ◽  
Vu Tram Anh Le ◽  
Dong Phuong Truong ◽  
Thi Dan Thy Kieu ◽  
Tran Thuy Hong Nguyen ◽  
...  
Keyword(s):  
Low Cost ◽  
Bet Surface Area ◽  
Precipitation Method ◽  
Maximum Adsorption Capacity ◽  
X Ray Diffraction ◽  
Copper Hexacyanoferrate ◽  
X Ray ◽  
Transmission Electron ◽  
High Concentrations ◽  
Co Precipitation

Low-cost nanoscale copper hexacyanoferrate (CuHF), a good selective adsorbent for cesium (Cs+) removal, was prepared using the chemical co-precipitation method. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), and high-resolution transmission electron microscopy (HR-TEM) were conducted to determine the CuHF morphology. Copper hexacyanoferrate, Cu13[Fe(CN)6]14.(2K).10H2O, has a cubic structure (space group F-43m) in the range of 10-30 nm and a Brunauer-Emmett-Teller (BET) surface area of 462.42 m2/g. The removal of Cs+ and Sr2+ is dependent on pH; the maximum adsorption capacity (qmax) of CuHF is achieved at a pH = 6. From the Langmuir model, qmax = 143.95 mg/g for Cs+ and 79.26 mg/g for Sr2+, respectively. At high concentrations, Na+, Ca2+, and K+ ions have very little effect on Cs+ removal, and Na+ and K+ ions have a higher affinity for removing Sr2+ than Ca2+ at all concentrations. CuHF has a high affinity for alkaline cations in the order: Cs+ > K+ > Na+ > Ca2+ > Sr2+, as proposed and discussed.

Template Induced Synthesis of Nano-Hydroxyapatite by Co-Precipitation Method

2011 ◽  
Vol 311-313 ◽  
pp. 1713-1716 ◽  
Author(s):  
Yan Rong Sun ◽  
Tao Fan ◽  
Chang An Wang ◽  
Li Guo Ma ◽  
Feng Liu
Keyword(s):  
Electron Microscope ◽  
Chondroitin Sulfate ◽  
Aspartic Acid ◽  
Transmission Electron Microscope ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure And Morphology ◽  
Transmission Electron ◽  
Co Precipitation

Nano-hydroxyapatite with different morphology was synthesized by the co-precipitation method coupled with biomineralization using Ca(NO3)2•4H2O and (NH4)2HPO4 as reagents, adding chondroitin sulfate, agarose and aspartic acid as template. The structure and morphology of the prepared powders were characterized by X-ray diffraction (XRD) and transmission electron microscope (TEM).

Coating Iron Oxides on Kaolinite for the Adsorption of Fluoride

2012 ◽  
Vol 479-481 ◽  
pp. 250-254
Author(s):  
Wen Jun Xiang
Keyword(s):  
Iron Oxides ◽  
Freundlich Isotherm ◽  
Zero Point ◽  
Bet Surface Area ◽  
Maximum Adsorption Capacity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Fluoride Adsorption ◽  
Adsorption Data ◽  
Co Precipitation

Iron oxides-coated kaolinite (Fe-Kaolinite) was prepared by co-precipitation and indentified using X-ray diffraction (XRD). Moreover, the surface properties and fluoride adsorption characteristics of Fe-Kaolinite were investigated and compared with those of kaolinite. Compared to kaolinite, the BET surface area and surface fractal dimension of Fe-Kaolinite increased significantly. The pH at zero point of charge (pHZPC) of kaolinite and Fe-Kaolinite was 3.16 and 6.24, respectively. In the suspensions of pH 6.0, the fitted maximum adsorption capacity (qmax) for fluoride of kaolinite and Fe-Kaolinite was 1.32 and 5.86 mg/g, respectively. The adsorption data for fluoride by Fe-Kaolinite could be fitted using Freundlich isotherm (R2 =0.987), and Langmuir isotherm was very suitable for describing the fluoride adsorption of kaolinite (R2 =0.991).

Synthesis and Characterization of Structure of Fe3O4@Graphene Oxide Nanocomposites

2016 ◽  
Vol 25 (6) ◽  
pp. 096369351602500 ◽  
Author(s):  
Ruimin Fu ◽  
Mingfu Zhu
Keyword(s):  
Graphene Oxide ◽  
Drug Carrier ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Ft Ir ◽  
Co Precipitation ◽  
Ft Ir Spectroscopy

Nowadays, the hummers method for preparation of graphene oxide (GO) was improved. The grapheme oxide @ Fe3O4 magnetic nanocomposites were synthesized by co-precipitation method. After analysing the morphology and structure of obtained nanocomposites by X-ray diffraction (XRD), transmission electron microscope (TEM) and Fourier transform infrared (FT-IR) spectroscopy, the result was shown as follows. The particle size of Fe3O4 in nanocomposites is 30 nm. Many functional groups are found in grapheme oxide, and such groups could be used to bind with the drug. In the test for magnetic properties, the nanocomposites gathered rapidly in the vicinity of the permanent magnet. The nanocomposites, with high superparamagnetism, can be used in the following applications: drug targeting transports, drug carrier, and diagnosis assistant system.

Synthesis and Luminescence Properties of Yb3+/Ho3+ Co-Doped Lu2O3 Nanocrystalline Powders

2007 ◽  
Vol 280-283 ◽  
pp. 521-524
Author(s):  
Li Qiong An ◽  
Jian Zhang ◽  
Min Liu ◽  
Sheng Wu Wang
Keyword(s):  
Electron Microscopy ◽  
Upconversion Luminescence ◽  
Nanocrystalline Powders ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
Excitation Spectra ◽  
X Ray ◽  
Transmission Electron ◽  
Co Precipitation ◽  
Co Doped

Yb3+ and Ho3+ co-doped Lu2O3 nanocrystalline powders were synthesized by a reversestrike co-precipitation method. The as-prepared powders were examined by the X-ray diffraction and transmission electron microscopy. The phase composition of the powders was cubic and the particle size was in the range of 30~50 nm. Emission and excitation spectra of the powders were measured by a spectrofluorometer and the possible upconversion luminescence mechanism was also discussed.

Loading of siRNA on Magnetic PLL-Fe2O3@SiO2 Nanocomposites and their Transfection In Vitro

2014 ◽  
Vol 1053 ◽  
pp. 444-449
Author(s):  
Xue Wen Cui ◽  
Gang Cheng ◽  
Rui Jiang Liu ◽  
Li Wei Wang ◽  
Yan Shuai Wang
Keyword(s):  
Electron Microscope ◽  
Precipitation Method ◽  
Blue Staining ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sd Rat ◽  
Gene Carriers ◽  
Transmission Electron ◽  
Co Precipitation

The magnetic Fe2O3 nanoparticles were prepared by co-precipitation method with FeCl3 and NaOH as starting reagents. The surface of Fe2O3 nanoparticles was modified with tetraethyl orthosilicate. Fe2O3@SiO2 nanocomposites were calcined at 600 °C. The nanocomposites were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX). The PLL-Fe2O3@SiO2 (SMNP) was prepared by modifying with poly-L-lysine on the surface. The SMNP combined with plasmid siRNA by static electrical charges as one of gene carriers was transfected into SD rat neurons. The results of fluorescence microscope and Prussian blue staining show that SMNP can effectively enter cells. Therefore, SMNP are one kind of novel and effective gene carriers, it can transfect the plasmid which carries the siRNA into SD rats neurons in vitro.

Synthesis of Fe2+ Ion Doped ZnS Nanoparticles

2014 ◽  
Vol 879 ◽  
pp. 155-163 ◽  
Author(s):  
Rahizana Mohd Ibrahim ◽  
Markom Masturah ◽  
Huda Abdullah
Keyword(s):  
Electron Microscopy ◽  
Optical Properties ◽  
Quantum Confinement Effect ◽  
Band Gap Energy ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Co Precipitation

Nanoparticles of Zn1-xFexS ( x=0.0,0.1,0.2 and 0.3) were prepared by chemical co-precipitation method from homogenous solution of zinc and ferum salt at room temperature with controlled parameter. These nanoparticles were sterically stabilized using Sodium Hexamethaphospate (SHMP). Here, a study of the effect of Fe doping on structure, morphological and optical properties of nanoparticles was undertaken. Elemental analysis, morphological and optical properties have been investigated by Fourier-Transform-Infrared spectroscopy (FT-IR), X-Ray Fluorescence (XRF), Field Emmision Scanning Electron Microscopy (FESEM), X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM) and UV-Visible Spectroscopy. FTIR measurement confirmed the presence of SHMP in the nanoparticles structure with the FESEM images depicting considerable less agglomeration of particles with the presence of SHMP. While XRF results confirm the presence of Fe2+ ion as prepared in the experiment. The particles sizes of the nanoparticles lay in the range of 2-10 nm obtained from the TEM image were in agreement with the XRD results. The absorption edge shifted to lower wavelengths with an increase in Fe concentration shown in the UV-Vis spectroscopy. The band gap energy value was in the range of 4.95 5.15 eV. The blueshift is attributed to the quantum confinement effect.

scholarly journals Synthesis of Li4Ti5O12/V2O5 Nanocomposites for Lithium-ion Batteries by a One-pot co-precipitation Method

2021 ◽  
Author(s):  
liu zhenjie ◽  
Yudai Huang ◽  
xingchao Wang ◽  
Yue Zhang ◽  
juan Ding ◽  
...  
Keyword(s):  
Lithium Ion ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
One Pot ◽  
High Discharge ◽  
X Ray ◽  
High Discharge Capacity ◽  
Transmission Electron ◽  
Co Precipitation ◽  
Nano Size

Abstract Li4Ti5O12/V2O5 nanocomposites were synthesized by a one-pot co-precipitation method. The structure and morphology of the as-prepared materials were analyzed by X-ray diffraction and transmission electron microscopy. The results show that Li4Ti5O12/V2O5 composites with different nano size were successfully synthesized. The Li4Ti5O12/V2O5 sample (2 wt.% V2O5 addition of Li4Ti5O12) keep at a high discharge capacity of 169.9 mAh g− 1 after 150 cycles at 1 C. The existence of the V2O5 reduces the size of Li4Ti5O12, which improve the electrochemical activity of the sample.

Synthesis of Fe-Mn-Ce SCR Catalyst by Precipitation Method Using Different Precipitating Agents

2011 ◽  
Vol 347-353 ◽  
pp. 1416-1419
Author(s):  
You Ning Xu ◽  
Hai Zhao ◽  
Duo Jiao Guan
Keyword(s):  
Electron Microscopy ◽  
Precipitation Method ◽  
Nanosized Particles ◽  
X Ray Diffraction ◽  
Scr Catalyst ◽  
X Ray ◽  
Surface Areas ◽  
Transmission Electron ◽  
Sulfur Capacity ◽  
Co Precipitation

Fe-Mn-Ce metal oxides nanosized particles have been prepared by co-precipitation approach using three kinds of precipitants NaOH, NH4OH and Na2CO3. The products were characterized by Powder X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM) and BET study. It was found that the samples prepared with NH4OH as a precipitator show higher surface areas and larger sulfur capacity at low calcinations temperature. At high reaction temperatures, the samples prepared with Na2CO3 as precipitator exhibited much better activities for SCR of nitric oxide with ammonia than catalysts prepared with NH4OH and NaOH as the precipitants.

The Preparation of Fe3O4 Magnetic Nanometer Particle by Co-Precipitation Method

2012 ◽  
Vol 271-272 ◽  
pp. 320-323
Author(s):  
Xiao Chun Ma ◽  
Lei Hao Cui ◽  
Guang Fei Xu
Keyword(s):  
Electron Microscopy ◽  
Surface Active Agent ◽  
Active Agent ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Surface Active ◽  
Co Precipitation ◽  
Nanometer Particle

In this paper, the Fe3O4 magnetic nanometer particle was prepared by co-precipitation method. At the same time, the samples were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The results show that the surface active agent (PEG4000) can be good for the dispersion performance of Fe3O4 magnetic nanometer particle; and the temperature of 80°C is the appropriate drying temperature to prepare the Fe3O4 magnetic nanometer particle.

Study on photocatalytic activity based on different pH values of AgBr/Ag2CO3 heterojunction

2020 ◽  
Vol 111 (10) ◽  
pp. 842-848
Author(s):  
Fengfeng Li ◽  
Mingxi Zhang ◽  
Jin Wang ◽  
Yongfeng Cai ◽  
Dushao Zhao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Rhodamine B ◽  
Photoelectron Spectroscopy ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Photocatalytic Activities ◽  
Co Precipitation ◽  
Degradation Degree

Abstract In this work, we fabricate a highly efficient photocatalytic AgBr/Ag2CO3 heterojunction through the co-precipitation method. The obtained samples were characterized by means of X-ray diffraction, scanning electron microscopy, transmission electron microscopy, ultraviolet-visible diffuse reflectance spectra and X-ray photoelectron spectroscopy. The photocatalytic activities of obtained samples can be assessed by visible light (λ ≥ 400 nm) degradation of rhodamine B solution. X-ray diffraction revealed that the crystallinity of the AgBr/Ag2CO3heterojunction was significantly higher than pure AgBr and Ag2CO3. Moreover, the AgBr/ Ag2CO3 heterojunction prepared at pH = 6 has the best photocatalytic performance, it can raise the degradation degree of rhodamine B over 95% at 20 min. Finally, a possible photocatalytic mechanism is discussed.

Sign in / Sign up

Export Citation Format

Share Document