scholarly journals Twofold role of calcined hydrotalcites in the degradation of methyl parathion pesticide

2011 ◽  
Vol 2 ◽  
pp. 99-103 ◽  
Author(s):  
Alvaro Sampieri ◽  
Geolar Fetter ◽  
María Elena Villafuerte-Castrejon ◽  
Adriana Tejeda-Cruz ◽  
Pedro Bosch
Keyword(s):  
Aqueous Solution ◽  
Room Temperature ◽  
Methyl Parathion ◽  
Organophosphate Pesticide ◽  
Anionic Clays ◽  
Rivers And Lakes ◽  
Metal Composition ◽  
By Products ◽  
Basic Strength

Methyl parathion (MP) is a very toxic organophosphate pesticide used as a non-systematic insecticide and acaricide on many corps. As MP and its by-products are highly toxic, they have to be retained to avoid pollution of rivers and lakes. Highly efficient sorbents are hydrotalcites (HTs) (or anionic clays). We have correlated the degradation of an aqueous solution of MP at room temperature, with the basicity of the adsorbing materials. It was found that the metal composition of hydrotalcites determines both the surface electronic properties (basic or acidic) and the sorption capacity. Depending on the basic strength, some calcined hydrotalcites can catalyze the transformation of MP to p-nitrophenol (p-NP) and retain its by-products. Such a process has the advantage of being able to be carried out at room temperature and at the pH of the pesticide solution.

Biodegradability enhancement of refractory pollutants by ozonation: a laboratory investigation on an azo-dyes intermediate

1998 ◽  
Vol 38 (4-5) ◽  
pp. 239-245 ◽  
Author(s):  
A. Lopez ◽  
G. Ricco ◽  
G. Mascolo ◽  
G. Tiravanti ◽  
A. C. Di Pinto ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Organic Carbon ◽  
Laboratory Investigation ◽  
Azo Dyes ◽  
Room Temperature ◽  
Carbonic Acid ◽  
Ozone Treatment ◽  
Alkaline Ph ◽  
Degradation Reactions ◽  
By Products

The effectiveness of ozone treatment for improving the biodegradability of recalcitrant pollutants has been proved by investigating the ozonation reaction of FAST-VIOLET-B (FVB) a bioresistant chemical intermediate of azo-dyes. Laboratory scale experiments have been carried out, at room temperature, by bubbling, for 90 min, ozonated air (9ppmO3/min) into 0.35 1 of an alkaline (pH=11) aqueous solution (50 ppm) of FVB. The experimental results indicate that during the ozonation, even though complete FVB degradation occurs in 10 min, ozone consumption goes on for a further 20 min after which time most degradation reactions are completed. The main ozonation by-products, identified by HPLC, IC, and GC-MS are formaldehyde, acetaldehyde, glyoxal, acetone, acetic-, formic-, oxalic- and carbonic-acid, plus six FVB derivatives scarcely biodegradable. At the end of the ozonation, i.e. after 30 min., the initial values of TOC (35 mgC/l) and COD (103 mgO2/l) are respectively 27 and 25 and correspond to a relative removal of about 23% and 76%. As for FVB solution biodegradability expressed as (BOD5)/(COD) ratio, during the first 10 min its value regularly increases from zero up to a maximum of 0.75 that corresponds to an ozone consumption of 2.4 mg per each mg of organic carbon initially present in the solution.

scholarly journals Role of Sawdust in the Removal of Iron from Aqueous Solution

2017 ◽  
Vol 23 (3) ◽  
pp. 223 ◽  
Author(s):  
H.B. Senin ◽  
O. Subhi ◽  
R. Rosliza ◽  
N. Kancono ◽  
M.S. Azhar ◽  
...  
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Langmuir Isotherm ◽  
Room Temperature ◽  
Freundlich Isotherm ◽  
Batch Test ◽  
Freundlich Isotherms ◽  
Langmuir And Freundlich Isotherms ◽  
Better Than

Sawdust, inexpensive material has been utilized as an absorbent for the removal of iron from aqueous solution for their safe disposal. The adsorption experiments of untreated sawdust (SD) and treated sawdust (SDC) have been carried out at room temperature using the batch test. The Langmuir and Freundlich isotherms were used to observe sorption phenomena of sawdust in the removal of iron. The results indicate that the sawdust was capable in removing iron in aqueous solution. The results have shown that the Langmuir isotherm was found well fitted into the experimental data as compared to the Freundlich isotherm. It was found that, chemisorptions and physisorption were the prime mechanism for the process of adsorption to occur between the sawdust and iron. The results also proved that the acid sulphuric treated sawdust is much better than that of untreated sawdust as an adsorbent for iron.

Clustering-Triggered Efficient Room Temperature Phosphorescence from Nonconventional Luminophores

2019 ◽  
Author(s):  
Shuyuan Zheng ◽  
Taiping Hu ◽  
Xin Bin ◽  
Yunzhong Wang ◽  
Yuanping Yi ◽  
...  
Keyword(s):  
Room Temperature ◽  
High Efficiency ◽  
Spin Orbit Coupling ◽  
Design Rationale ◽  
Emission Mechanism ◽  
Room Temperature Phosphorescence ◽  
Electronic Interactions ◽  
Energy Gaps ◽  
Theoretical Results

Pure organic room temperature phosphorescence (RTP) and luminescence from nonconventional luminophores have gained increasing attention. However, it remains challenging to achieve efficient RTP from unorthodox luminophores, on account of the unsophisticated understanding of the emission mechanism. Here we propose a strategy to realize efficient RTP in nonconventional luminophores through incorporation of lone pairs together with clustering and effective electronic interactions. The former promotes spin-orbit coupling and boost the consequent intersystem crossing, whereas the latter narrows energy gaps and stabilizes the triplets, thus synergistically affording remarkable RTP. Experimental and theoretical results of urea and its derivatives verify the design rationale. Remarkably, RTP from thiourea solids with unprecedentedly high efficiency of up to 24.5% is obtained. Further control experiments testify the crucial role of through-space delocalization on the emission. These results would spur the future fabrication of nonconventional phosphors, and moreover should advance understanding of the underlying emission mechanism.<br>

Sewage sludge as a precursor of adsorbents/catalysts for environmental applications

2007 ◽  
Vol 2 (1) ◽  
Author(s):  
A. Ros ◽  
C. Canals-Batlle ◽  
M.A. Lillo-Ródenas ◽  
E. Fuente ◽  
M. A. Montes-Morán ◽  
...  
Keyword(s):  
Sewage Sludge ◽  
Room Temperature ◽  
Waste Water Treatment ◽  
Textural Properties ◽  
Active Species ◽  
Elemental Sulphur ◽  
Gaseous Emissions ◽  
Removal Experiments ◽  
Catalytically Active

This paper focuses on the valorisation of solid residues obtained from the thermal treatment of sewage sludge. In particular, sewage sludge samples were collected from two waste water treatment plants (WWTPs) with different sludge line basic operations. After drying, sludges were heated up to 700 °C in appropriate ovens under diluted air (gasification) and inert (pyrolysis) atmospheres. The solids obtained, as well as the dried (raw) sludges, were characterised to determine their textural properties and chemical composition, including the speciation of their inorganic fraction. All the materials under study were employed as adsorbents/catalysts in H2S removal experiments at room temperature. It was found that, depending on the particular sludge characteristics, outstanding results can be achieved both in terms of retention capacities and selectivity. Some of the solids outperform commercially available sorbents specially designed for gaseous emissions control. In these adsorbents/catalysts, H2S is selectively oxidised to elemental sulphur most likely due to the presence of inorganic, catalytically active species. The role of the carbon-enriched part on these solids is also remarked.

Understanding the Role of Chlorine and Ozone to Control Postharvest Diseases in Fruit and Vegetables: A Review

2020 ◽  
Vol 16 (4) ◽  
pp. 455-461
Author(s):  
Gabriela M. Baia ◽  
Otniel Freitas-Silva ◽  
Murillo F. Junior
Keyword(s):  
Chlorine Dioxide ◽  
Broad Spectrum ◽  
Fruits And Vegetables ◽  
Low Cost ◽  
Residual Effects ◽  
Pathogenic Microorganisms ◽  
Postharvest Diseases ◽  
Post Harvest ◽  
By Products

Fruits and vegetables are foods that come into contact with various types of microorganisms from planting to their consumption. A lack or poor sanitation of these products after harvest can cause high losses due to deterioration and/ or pathogenic microorganisms. There are practically no post-harvest fungicides or bactericides with a broad spectrum of action that have no toxic residual effects and are safe. However, to minimize such problems, the use of sanitizers is an efficient device against these microorganisms. Chlorine is the most prevalent sanitizing agent because of its broad spectrum, low cost and well-established practices. However, the inevitable formation of disinfection by-products, such as trihalomethanes (THMs) and haloacetic acids (HAAs), is considered one of the main threats to food safety. Alternative sanitizers, such as chlorine dioxide (ClO2) and ozone, are becoming popular as a substitute for traditional post-harvest treatments. Thus, this review addresses the use of chlorine, chlorine dioxide and ozone emphasizing aspects, such as usage, safe application, spectrum of action and legislation. In order to ensure the quality and safety of final products, the adoption of well-prepared sanitation and sanitation programs for post-harvest fruits and vegetables is essential.

Room-Temperature Negative Differential Resistance in Amorphous Carbon: The Role of Electron Trapping Defects at Device Interfaces

2020 ◽  
pp. 1-6
Author(s):  
Phuong Y. Le ◽  
Amanda Gazzana ◽  
Billy J. Murdoch ◽  
Dougal G. McCulloch ◽  
David R. McKenzie ◽  
...  
Keyword(s):  
Amorphous Carbon ◽  
Negative Differential Resistance ◽  
Room Temperature ◽  
Differential Resistance ◽  
Electron Trapping

scholarly journals Practical Synthesis of 2-Iodosobenzoic Acid (IBA) without Contamination by Hazardous 2-Iodoxybenzoic Acid (IBX) under Mild Conditions

Molecules ◽  
2021 ◽  
Vol 26 (7) ◽  
pp. 1897
Author(s):  
Hideyasu China ◽  
Nami Kageyama ◽  
Hotaka Yatabe ◽  
Naoko Takenaga ◽  
Toshifumi Dohi
Keyword(s):  
Aqueous Solution ◽  
Room Temperature ◽  
Practical Method ◽  
Hypervalent Iodine ◽  
Mild Conditions ◽  
Sequential Procedures ◽  
Iodine Compounds ◽  
Practical Synthesis ◽  
Iodosobenzoic Acid ◽  
Lower Temperature

We report a convenient and practical method for the preparation of nonexplosive cyclic hypervalent iodine(III) oxidants as efficient organocatalysts and reagents for various reactions using Oxone® in aqueous solution under mild conditions at room temperature. The thus obtained 2-iodosobenzoic acids (IBAs) could be used as precursors of other cyclic organoiodine(III) derivatives by the solvolytic derivatization of the hydroxy group under mild conditions of 80 °C or lower temperature. These sequential procedures are highly reliable to selectively afford cyclic hypervalent iodine compounds in excellent yields without contamination by hazardous pentavalent iodine(III) compound.

scholarly journals Self-assembly induced luminescence of Eu3+-complexes and application in bioimaging

2021 ◽  
Author(s):  
Ping-Ru Su ◽  
Tao Wang ◽  
Pan-Pan Zhou ◽  
Xiao-Xi Yang ◽  
Xiao-Xia Feng ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Rare Earth ◽  
Luminescence Intensity ◽  
Self Assembly ◽  
Room Temperature ◽  
Molecular Motion ◽  
Proof Of Concept ◽  
Room Temperature Phosphorescence ◽  
New Strategy ◽  
Size Controlled

Abstract Design and engineering of highly efficient emitting materials with assembly-induced luminescence, such as room temperature phosphorescence (RTP) and aggregation-induced emission (AIE), have stimulated extensive efforts. Here, we propose a new strategy to obtain size-controlled Eu3+-complex nanoparticles (Eu-NPs) with self-assembly induced luminescence (SAIL) characteristics without encapsulation or hybridization. Compared with previous RTP or AIE materials, the SAIL phenomena of increased luminescence intensity and lifetime in aqueous solution for the proposed Eu-NPs are due to the combined effect of self-assembly in confining the molecular motion and shielding the water quenching. As a proof of concept, we also show that this system can be further applied in bioimaging, temperature measurement and HClO sensing. The SAIL activity of the rare-earth (RE) system proposed here offers a further step forward on the roadmap for the development of RE light conversion systems and their integration in bioimaging and therapy applications.

Sign in / Sign up

Export Citation Format

Share Document