scholarly journals Contextual restrictions on cumulativity

2022 ◽  
Vol 31 ◽  
pp. 283
Author(s):  
Nina Haslinger
Keyword(s):  
Context Dependency ◽  
Natural Class ◽  
Truth Value ◽  
Plural Predication ◽  
Special Composition ◽  
Selection Of

This paper revisits the semantic variability of sentences with simple plural (in)definites in English and German, which permit distributive, cumulative and paired-cover construals. I argue that this variability reflects context-dependency rather than LF ambiguity (Schwarzschild 1996) and that the selection of a particular construal in context is driven by the QUD in the same way as the choice between maximal and non-maximal construals of plural definites (Malamud 2012; Križ 2015; Križ & Spector 2020). I then develop a new semantics for plural predication on which non-distributive and non-maximal construals form a natural class. The system extends the idea that non-maximality involves truth-value gaps (e.g. Križ 2015) to non-distributive construals by making use of Schmitt’s (2019) ‘plural projection’ framework, in which plural sentences involve special composition rules.

scholarly journals A Logical Characterization of the Preferred Models of Logic Programs with Ordered Disjunction

2021 ◽  
pp. 1-17
Author(s):  
ANGELOS CHARALAMBIDIS ◽  
PANOS RONDOGIANNIS ◽  
ANTONIS TROUMPOUKIS
Keyword(s):  
Classical Logic ◽  
Logic Programs ◽  
Natural Class ◽  
New Approach ◽  
Open Issue ◽  
Truth Value ◽  
Novel Model ◽  
Selection Of

Abstract Logic programs with ordered disjunction (LPODs) extend classical logic programs with the capability of expressing alternatives with decreasing degrees of preference in the heads of program rules. Despite the fact that the operational meaning of ordered disjunction is clear, there exists an important open issue regarding its semantics. In particular, there does not exist a purely model-theoretic approach for determining the most preferred models of an LPOD. At present, the selection of the most preferred models is performed using a technique that is not based exclusively on the models of the program and in certain cases produces counterintuitive results. We provide a novel, model-theoretic semantics for LPODs, which uses an additional truth value in order to identify the most preferred models of a program. We demonstrate that the proposed approach overcomes the shortcomings of the traditional semantics of LPODs. Moreover, the new approach can be used to define the semantics of a natural class of logic programs that can have both ordered and classical disjunctions in the heads of clauses. This allows programs that can express not only strict levels of preferences but also alternatives that are equally preferred.

HOW TO HANDLE THE FLEXIBILITY OF LINGUISTIC VARIABLES WITH APPLICATIONS

1994 ◽  
Vol 02 (04) ◽  
pp. 463-484 ◽  
Author(s):  
ANDREAS BASTIAN
Keyword(s):  
Operational Definition ◽  
Context Dependency ◽  
Linguistic Variable ◽  
Linguistic Variables ◽  
Fuzzy Controllers ◽  
New Class ◽  
Rule Structure ◽  
Definition Of ◽  
Different Characteristics ◽  
Selection Of

In this paper some limitations of the conventional IF — THEN fuzzy rules due to the context dependency and rule structure are discussed. To overcome those limitations, the operational definition of a linguistic variable proposed by Zadeh is extended in such a way that a fuzzy value of a linguistic variable may take several meanings depending on the context. Applied to fuzzy controllers and models, this new operational definition leads to a new class of fuzzy controllers and models. To show its applicability this concept is applied to model the gear selection of two human drivers with different characteristics.

VULCANIZATION SYSTEMS FOR RUBBER COMPOUNDS BASED ON IIR AND HALOGENATED IIR: AN OVERVIEW

2018 ◽  
Vol 91 (1) ◽  
pp. 167-183 ◽  
Author(s):  
Ján Kruželák ◽  
Ivan Hudec
Keyword(s):  
Phenol Formaldehyde ◽  
Chemical Reactivity ◽  
Industrial Applications ◽  
General Purpose ◽  
Performance Requirements ◽  
Rubber Compounds ◽  
Special Composition ◽  
Selection Of ◽  
Ozone Resistance ◽  
Curing Systems

ABSTRACT The properties of IIR and halogenated IIRs, such as excellent steam and gas impermeability, heat aging stability, and oxygen and ozone resistance and increased chemical resistance, meet the demands of various industrial applications. However, due to the low level of unsaturation of IIR, the vulcanization rate is rather low and the degree of cross-linking is usually insufficient, causing IIR to be minimally co-vulcanized with unsaturated general-purpose rubbers. The low reactivity of IIR requires the consideration of a special composition of curing systems to provide the best possible rate and state of vulcanization. The type of curing system selected must also be a function of the composition of rubber formulations in which the IIR is used, and with respect to the final product's performance requirements. Therefore, the curing systems for IIR differ and can include standard sulfur systems, phenol-formaldehyde resins, or quinones. The incorporation of halogen (chlorine or bromine) atoms into the structure of IIR significantly increases the chemical reactivity, which can be subsequently reflected in a higher curing rate and the possibility to use some additional vulcanization systems such as metal oxides, diamines, or peroxide with co-agent. This study reviews the types and selection of applicable curing systems for IIR and its halogenated derivates.

Cognitive gadgets and cognitive priors

2019 ◽  
Vol 42 ◽  
Author(s):  
Gian Domenico Iannetti ◽  
Giorgio Vallortigara
Keyword(s):  
Cognitive Neuroscience ◽  
Selection Of

Abstract Some of the foundations of Heyes’ radical reasoning seem to be based on a fractional selection of available evidence. Using an ethological perspective, we argue against Heyes’ rapid dismissal of innate cognitive instincts. Heyes’ use of fMRI studies of literacy to claim that culture assembles pieces of mental technology seems an example of incorrect reverse inferences and overlap theories pervasive in cognitive neuroscience.

Note on Selection of Coordinate Systems for Geodynamics

1975 ◽  
Vol 26 ◽  
pp. 395-407
Author(s):  
S. Henriksen
Keyword(s):  
Sea Level ◽  
The Other ◽  
Coordinate Systems ◽  
Mean Sea Level ◽  
The Earth ◽  
The One ◽  
Static Systems ◽  
Selection Of

The first question to be answered, in seeking coordinate systems for geodynamics, is: what is geodynamics? The answer is, of course, that geodynamics is that part of geophysics which is concerned with movements of the Earth, as opposed to geostatics which is the physics of the stationary Earth. But as far as we know, there is no stationary Earth – epur sic monere. So geodynamics is actually coextensive with geophysics, and coordinate systems suitable for the one should be suitable for the other. At the present time, there are not many coordinate systems, if any, that can be identified with a static Earth. Certainly the only coordinate of aeronomic (atmospheric) interest is the height, and this is usually either as geodynamic height or as pressure. In oceanology, the most important coordinate is depth, and this, like heights in the atmosphere, is expressed as metric depth from mean sea level, as geodynamic depth, or as pressure. Only for the earth do we find “static” systems in use, ana even here there is real question as to whether the systems are dynamic or static. So it would seem that our answer to the question, of what kind, of coordinate systems are we seeking, must be that we are looking for the same systems as are used in geophysics, and these systems are dynamic in nature already – that is, their definition involvestime.

Measurements of the Cape Astrometric Survey of the Southern Hemisphere

1978 ◽  
Vol 48 ◽  
pp. 515-521
Author(s):  
W. Nicholson
Keyword(s):  
Southern Hemisphere ◽  
Automatic Measuring ◽  
Measuring Machine ◽  
Final Selection ◽  
Selection Of

SummaryA routine has been developed for the processing of the 5820 plates of the survey. The plates are measured on the automatic measuring machine, GALAXY, and the measures are subsequently processed by computer, to edit and then refer them to the SAO catalogue. A start has been made on measuring the plates, but the final selection of stars to be made is still a matter for discussion.

Application of Improved Voltage Compensation in the SEM to Imaging of Organic Materials

1973 ◽  
Vol 31 ◽  
pp. 444-445
Author(s):  
P.J. Killingworth ◽  
M. Warren
Keyword(s):  
Electron Beam ◽  
Organic Materials ◽  
Operating Parameters ◽  
Low Density ◽  
Beam Diameter ◽  
Incident Electron Beam ◽  
Specimen Material ◽  
Voltage Compensation ◽  
Selection Of ◽  
Scanning Electron

Ultimate resolution in the scanning electron microscope is determined not only by the diameter of the incident electron beam, but by interaction of that beam with the specimen material. Generally, while minimum beam diameter diminishes with increasing voltage, due to the reduced effect of aberration component and magnetic interference, the excited volume within the sample increases with electron energy. Thus, for any given material and imaging signal, there is an optimum volt age to achieve best resolution.In the case of organic materials, which are in general of low density and electric ally non-conducting; and may in addition be susceptible to radiation and heat damage, the selection of correct operating parameters is extremely critical and is achiev ed by interative adjustment.

Selection and Preparation of Specific Tissue Regions For Tem Using Large Epoxy-Embedded Blocks

1973 ◽  
Vol 31 ◽  
pp. 324-325 ◽  
Author(s):  
P. M. Lowrie ◽  
W. S. Tyler
Keyword(s):  
Electron Microscopy ◽  
Anatomical Structures ◽  
Ultrastructural Studies ◽  
Transmission Electron ◽  
Microscopic Evaluation ◽  
Embedded Blocks ◽  
Specific Tissue ◽  
Definition Of ◽  
Areas Of Interest ◽  
Selection Of

The importance of examining stained 1 to 2μ plastic sections by light microscopy has long been recognized, both for increased definition of many histologic features and for selection of specimen samples to be used in ultrastructural studies. Selection of specimens with specific orien ation relative to anatomical structures becomes of critical importance in ultrastructural investigations of organs such as the lung. The uantity of blocks necessary to locate special areas of interest by random sampling is large, however, and the method is lacking in precision. Several methods have been described for selection of specific areas for electron microscopy using light microscopic evaluation of paraffin, epoxy-infiltrated, or epoxy-embedded large blocks from which thick sections were cut. Selected areas from these thick sections were subsequently removed and re-embedded or attached to blank precasted blocks and resectioned for transmission electron microscopy (TEM).

Organization of tight junctions in the choroid plexus epithelium

1978 ◽  
Vol 36 (2) ◽  
pp. 336-337
Author(s):  
B. Van Deurs ◽  
J. K. Koehler
Keyword(s):  
Choroid Plexus ◽  
Present Report ◽  
Freeze Fracture ◽  
Barrier Properties ◽  
Cell Junctions ◽  
Structural Basis ◽  
Apical Surface ◽  
Choroid Plexus Epithelium ◽  
Solid Nitrogen ◽  
Special Composition

The choroid plexus epithelium constitutes a blood-cerebrospinal fluid (CSF) barrier, and is involved in regulation of the special composition of the CSF. The epithelium is provided with an ouabain-sensitive Na/K-pump located at the apical surface, actively pumping ions into the CSF. The choroid plexus epithelium has been described as “leaky” with a low transepithelial resistance, and a passive transepithelial flux following a paracellular route (intercellular spaces and cell junctions) also takes place. The present report describes the structural basis for these “barrier” properties of the choroid plexus epithelium as revealed by freeze fracture.Choroid plexus from the lateral, third and fourth ventricles of rats were used. The tissue was fixed in glutaraldehyde and stored in 30% glycerol. Freezing was performed either in liquid nitrogen-cooled Freon 22, or directly in a mixture of liquid and solid nitrogen prepared in a special vacuum chamber. The latter method was always used, and considered necessary, when preparations of complementary (double) replicas were made.

The DQE of an electron image recording system

1978 ◽  
Vol 36 (1) ◽  
pp. 100-101
Author(s):  
K.-H. Herrmann ◽  
D. Krahl ◽  
H.-P Rust
Keyword(s):  
Primary Electron ◽  
Ideal Case ◽  
Image Recording ◽  
Main Requirement ◽  
High Detection ◽  
Electron Image ◽  
Video Amplifier ◽  
Detection Quantum Efficiency ◽  
Selection Of ◽  
The Ideal

The high detection quantum efficiency (DQE) is the main requirement for an imagerecording system used in electron microscopy of radiation-sensitive specimens. An electronic TV system of the type shown in Fig. 1 fulfills these conditions and can be used for either analog or digital image storage and processing [1], Several sources of noise may reduce the DQE, and therefore a careful selection of various elements is imperative.The noise of target and of video amplifier can be neglected when the converter stages produce sufficient target electrons per incident primary electron. The required gain depends on the type of the tube and also on the type of the signal processing chosen. For EBS tubes, for example, it exceeds 10. The ideal case, in which all impinging electrons create uniform charge peaks at the target, is not obtainable for several reasons, and these will be discussed as they relate to a system with a scintillator, fiber-optic and photo-cathode combination as the first stage.

Sign in / Sign up

Export Citation Format

Share Document