Wind Turbine Airfoil Optimal Design With High Whole Aerodynamic Performance Considering Continuous Angle of Attack

2017 ◽  
Vol 53 (13) ◽  
pp. 143
Author(s):  
Quan WANG
Keyword(s):  
Optimal Design ◽  
Wind Turbine ◽  
Angle Of Attack ◽  
Aerodynamic Performance ◽  
Wind Turbine Airfoil

Aerodynamic Analysis of an Airfoil With Leading Edge Pitting Erosion

2017 ◽  
Vol 139 (6) ◽  
Author(s):  
Yan Wang ◽  
Ruifeng Hu ◽  
Xiaojing Zheng
Keyword(s):  
Wind Turbine ◽  
Indirect Effects ◽  
Leading Edge ◽  
Aerodynamic Performance ◽  
Navier Stokes ◽  
Distribution Area ◽  
Navier Stokes Equation ◽  
Turbine Performance ◽  
Wind Turbine Airfoil ◽  
Cfd Method

Leading edge erosion is a considerable threat to wind turbine performance and blade maintenance, and it is very imperative to accurately predict the influence of various degrees of erosion on wind turbine performance. In the present study, an attempt to investigate the effects of leading edge erosion on the aerodynamics of wind turbine airfoil is undertaken by using computational fluid dynamics (CFD) method. A new pitting erosion model is proposed and semicircle cavities were used to represent the erosion pits in the simulation. Two-dimensional incompressible Reynolds-averaged Navier–Stokes equation and shear stress transport (SST) k–ω turbulence model are adopted to compute the aerodynamics of a S809 airfoil with leading edge pitting erosions, where the influences of pits depth, densities, distribution area, and locations are considered. The results indicate that pitting erosion has remarkably undesirable influences on the aerodynamic performance of the airfoil, and the critical pits depth, density, and distribution area degrade the airfoil aerodynamic performance mostly were obtained. In addition, the dominant parameters are determined by the correlation coefficient path analysis method, results showed that all parameters have non-negligible effects on the aerodynamics of S809 airfoil, and the Reynolds number is of the most important, followed by pits density, pits depth, and pits distribution area. Meanwhile, the direct and indirect effects of these factors are analyzed, and it is found that the indirect effects are very small and the parameters can be considered to be independent with each other.

scholarly journals Aerodynamic Performance of Wind Turbine Airfoil DU 91-W2-250 under Dynamic Stall

2018 ◽  
Vol 8 (7) ◽  
pp. 1111 ◽  
Author(s):  
Shuang Li ◽  
Lei Zhang ◽  
Ke Yang ◽  
Jin Xu ◽  
Xue Li
Keyword(s):  
Wind Turbine ◽  
Aerodynamic Performance ◽  
Dynamic Stall ◽  
Wind Turbine Airfoil

scholarly journals Aerodynamic Sensitivity Analysis for a Wind Turbine Airfoil in an Air-Particle Two-Phase Flow

2019 ◽  
Vol 9 (18) ◽  
pp. 3909 ◽  
Author(s):  
Tongqing Guo ◽  
Junjun Jin ◽  
Zhiliang Lu ◽  
Di Zhou ◽  
Tongguang Wang
Keyword(s):  
Wind Turbine ◽  
Stokes Equations ◽  
Angle Of Attack ◽  
Performance Degradation ◽  
Navier Stokes ◽  
Discrete Phase Model ◽  
Two Phase ◽  
Naca0012 Airfoil ◽  
Particle Flows ◽  
Wind Turbine Airfoil

In this paper, the Navier-Stokes equations coupled with a Lagrangian discrete phase model are described to simulate the air-particle flows over the S809 airfoil of the Phase VI blade, the NH6MW25 airfoil of a 6 MW wind turbine blade and the NACA0012 airfoil. The simulation results demonstrate that, in an attached flow, the slight performance degradation is caused by the boundary layer momentum loss. After flow separation, the performance degradation becomes significant and is dominated by a more extensive separation due to particles, since the aerodynamic coefficient increments and the moving distance of separation point present similar variation trends with increasing angle of attack. Unlike the NACA0012 airfoil, a most particle-sensitive angle of attack is found in the light stall region for a wind turbine airfoil, at which the lift decrement and the drag increment reach their peak values. For the S809 airfoil, the most sensitive angle of attack is about 3° higher than that for the maximum lift-to-drag ratio. Hence, the aerodynamic performance of a wind turbine is very susceptible to particles. Based on the most sensitive angles of attack, the more sensitive scope of angles of attack of a blade airfoil and the more sensitive range of rotor tip speed ratios are predicted sequentially. The present study clarifies the principles for the performance degradation of a wind turbine airfoil due to particles and the conclusions are useful for the wind turbine design reducing the particle influences.

scholarly journals Effect of Single-Row and Double-Row Passive Vortex Generators on the Deep Dynamic Stall of a Wind Turbine Airfoil

Energies ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2535
Author(s):  
Chengyong Zhu ◽  
Tongguang Wang ◽  
Jie Chen ◽  
Wei Zhong
Keyword(s):  
Wind Turbine ◽  
Flow Separation ◽  
Aerodynamic Performance ◽  
Vortex Generators ◽  
Dynamic Stall ◽  
Aerodynamic Forces ◽  
Double Row ◽  
Single Row ◽  
Maximum Angle ◽  
Wind Turbine Airfoil

Passive vortex generators (VGs) have been widely applied on wind turbines to boost the aerodynamic performance. Although VGs can delay the onset of static stall, the effect of VGs on dynamic stall is still incompletely understood. Therefore, this paper aims at investigating the deep dynamic stall of NREL S809 airfoil controlled by single-row and double-row VGs. The URANS method with VGs fully resolved is used to simulate the unsteady airfoil flow. Firstly, both single-row and double-row VGs effectively suppress the flow separation and reduce the fluctuations in aerodynamic forces when the airfoil pitches up. The maximum lift coefficient is therefore increased beyond 40%, and the onset of deep dynamic stall is also delayed. This suggests that deep dynamic-stall behaviors can be properly controlled by VGs. Secondly, there is a great difference in aerodynamic performance between single-row and double-row VGs when the airfoil pitches down. Single-row VGs severely reduce the aerodynamic pitch damping by 64%, thereby undermining the torsional aeroelastic stability of airfoil. Double-row VGs quickly restore the decreased aerodynamic efficiency near the maximum angle of attack, and also significantly accelerate the flow reattachment. The second-row VGs can help the near-wall flow to withstand the adverse pressure gradient and then suppress the trailing-edge flow separation, particularly during the downstroke process. Generally, double-row VGs are better than single-row VGs concerning controlling deep dynamic stall. This work also gives a performance assessment of VGs in controlling the highly unsteady aerodynamic forces of a wind turbine airfoil.

Horizontal Axis Wind Turbine Numerical Simulation of Two Dimensional Angle of Attack

2012 ◽  
Vol 619 ◽  
pp. 111-114
Author(s):  
Jing Mei Yu ◽  
Yan Hong Yu ◽  
Pan Pan Liu
Keyword(s):  
Numerical Simulation ◽  
Wind Turbine ◽  
Hot Spot ◽  
The United States ◽  
Aerodynamic Performance ◽  
Horizontal Axis ◽  
Energy Utilization ◽  
Two Dimensional ◽  
Horizontal Axis Wind Turbine ◽  
Wind Turbine Airfoil

wind power is the most effective form of wind energy utilization, modern large-scale wind turbine with horizontal axis wind mainly. Horizontal axis wind turbine aerodynamic performance calculation of the wind turbine aerodynamics research hot spot, is a wind turbine aerodynamic optimization design and calculation of critical load. Horizontal axis wind turbine airfoil aerodynamic performance of the wind turbine operation characteristics and life plays a decisive role". Using Fluent software on the horizontal axis wind turbine numerical simulation, analysis of the United States of America S809NREL airfoil aerodynamic characteristics of different angles of attack numerical simulation, analyzes the different angles of attack in the vicinity of the pressure, velocity distribution. By solving the two-dimensional unsteady, compressible N-S equations for the calculation of wind turbine airfoil S809used the characteristics of flow around. N-S equation in body-fitted coordinate system is given, with the Poisson equation method to generate the C grid.

Research on Improved Method of Wind Turbine Airfoil S834 Based on Noise and Aerodynamic Performance

2015 ◽  
Vol 744-746 ◽  
pp. 253-258 ◽  
Author(s):  
Ya Qiong Chen ◽  
Yue Fa Fang
Keyword(s):  
Wind Turbine ◽  
Optimization Design ◽  
Design Method ◽  
Aerodynamic Performance ◽  
Parametric Modeling ◽  
Multi Objective ◽  
Wind Turbine Airfoil ◽  
Drag Ratio ◽  
Operating Points ◽  
Lift To Drag Ratio

In this paper, aerodynamic performance and noise of the wind turbine airfoil are the optimization design goal and based on this, the optimization design method with multi-operating points and multi-objective of the airfoils is built. The Bezier curve is used in parametric modeling of the contour of the airfoil and the general equation for control points is deduced form the discrete points coordinates of the airfoil. The weigh distribution schemes for multi-objective and multi-operating points are integrated designed by treating the NREL S834 airfoil as the initial airfoils. The results show that the lift-to-drag ratio of the optimized airfoils has a improvement around the designed operating angle and the overall noise has a reduction compared with the initial airfoils, which means that the optimized airfoils get a better aerodynamic and acoustic performance.

Analysing and Optimizing the Aerodynamic Performance of Wind Turbine Blades Using Injected-Air Jets at Variable Frequency and Amplitude for Flow Control

2005 ◽  
Vol 29 (4) ◽  
pp. 331-339 ◽  
Author(s):  
Liu Hong ◽  
Huo Fupeng ◽  
Chen Zuoyi
Keyword(s):  
Wind Turbine ◽  
Turbine Blade ◽  
Lift Coefficient ◽  
Turbine Blades ◽  
Angle Of Attack ◽  
Leading Edge ◽  
Aerodynamic Performance ◽  
Operating Conditions ◽  
Suction Surface ◽  
Air Jet

Optimum aerodynamic performance of a wind turbine blade demands that the angle of attack of the relative wind on the blade remains at its optimum value. For turbines operating at constant speed, a change in wind speed causes the angle of attack to change immediately and the aerodynamic performance to decrease. Even with variable speed rotors, intrinsic time delays and inertia have similar effects. Improving the efficiency of wind turbines under variable operating conditions is one of the most important areas of research in wind power technology. This paper presents findings of an experimental study in which an oscillating air jet located at the leading edge of the suction surface of an aerofoil was used to improve the aerodynamic performance. The mean air-mass flowing through the jet during each sinusoidal period of oscillation equalled zero; i.e. the jet both blew and sucked. Experiments investigated the effects of the frequency, momentum and location of the jet stream, and the profile of the turbine blade. The study shows significant increase in the lift coefficient, especially in the stall region, under certain conditions. These findings may have important implications for wind turbine technology.

Sign in / Sign up

Export Citation Format

Share Document