scholarly journals A design and performance prediction method for small horizontal axis wind turbines and its application

AIMS Energy ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 1043-1066
Author(s):  
Stephen K. Musau ◽  
◽  
Kathrin Stahl ◽  
Kevin Volkmer ◽  
Nicholas Kaufmann ◽  
...  
Keyword(s):  
Wind Speed ◽  
Wind Turbines ◽  
Performance Prediction ◽  
Prediction Method ◽  
Drive Train ◽  
Performance Characteristics ◽  
Speed Ratio ◽  
Battery Charger ◽  
Tip Speed Ratio ◽  
And Performance

<abstract> <p>The paper deals with small wind turbines for grid-independent or small smart grid wind turbine systems. Not all small turbine manufacturers worldwide have access to the engineering capacity for designing an efficient turbine. The objective of this work is to provide an easy-to-handle integrated design and performance prediction method for wind turbines and to show exemplary applications.</p> <p>The underlying model for the design and performance prediction method is based on an advanced version of the well-established blade-element-momentum theory, encoded in MATLAB™. Results are (i) the full geometry of the aerodynamically profiled and twisted blades which are designed to yield maximum power output at a given wind speed and (ii) the non-dimensional performance characteristics of the turbine in terms of power, torque and thrust coefficient as a function of tip speed ratio. The non-dimensional performance characteristics are the basis for the dimensional characteristics and the synthesis of the rotor to the electric generator with its load.</p> <p>Two parametric studies illustrate typical outcomes of the design and performance prediction method: A variation of the design tip speed ratio and a variation of the number of blades. The predicted impact of those parameters on the non-dimensional performance characteristics agrees well with common knowledge and experience.</p> <p>Eventually, an interplay of various designed turbine rotors and the given drive train/battery charger is simulated. Criterions for selection of the rotor are the annual energy output, the rotor speed at design wind speed as well as high winds, and the axial thrust exerted on the rotor by the wind. The complete rotor/drive train//battery charger assembly is tested successfully in the University of Siegen wind tunnel.</p> </abstract>

Performance Characteristics of a Horizontal Axis Model Wind Turbine

1981 ◽  
Vol 195 (1) ◽  
pp. 223-229 ◽  
Author(s):  
A T Sayers ◽  
A F Christopher Bsc
Keyword(s):  
Low Power ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Horizontal Axis ◽  
Performance Characteristics ◽  
Coefficient Of Performance ◽  
Speed Ratio ◽  
Tip Speed Ratio ◽  
And Performance ◽  
Prototype Design

The performance characteristics of wind turbines should be thoroughly investigated prior to expending large amounts of capital on a prototype design. A low power dynamometer is described for measuring the power and torque output from a two-bladed model wind turbine, and performance characteristics relating coefficient of performance to tip speed ratio and blade geometric pitch are presented for three designs of blade.

scholarly journals Study on performance of a savonius wind turbines related with the blade angle

2019 ◽  
Vol 1 (2) ◽  
pp. 32-36
Author(s):  
Saowalak Thongdee ◽  
Churat Tararuk ◽  
Natthawud Dussadee ◽  
Rameshprabu Ramaraj ◽  
Tanate Chaichana
Keyword(s):  
Wind Speed ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Speed Ratio ◽  
Blade Angle ◽  
Tip Speed Ratio ◽  
Vertical Axis Wind Turbines ◽  
Torque Coefficient ◽  
Savonius Wind Turbine ◽  
Positive Effect

This research aimed to compare the performance of Savonius vertical axis wind turbines through blade numbers and different blade angles. In this study, applicable turbines having 4, 6, 8, 12, 16 and 18 numbers of blades with the angles of the blades of -15°, -5°, 0°, 5° and 15°, respectively. The rotor used was a semicircle shaped blade made from PVC material and has a blade diameter of 6 cm and 30 cm for both rotor diameter and height. The turbine was tested deadweight range of 0-0.49 kg at 4 m/s wind speed. The results showed that the blade angle has a positive effect on increasing the power and torque coefficient of Savonius wind turbine, specifically on blades less than 16. The highest power and torque coefficient was obtained from the turbine having16 blades at an angle of 5°. This configuration also found that the maximum power and torque coefficient in the tip speed ratio ranging from 0.3-0.4 are 0.2519 and 0.5858, respectively.

scholarly journals Numerical Simulation and Wind Tunnel Investigation on Static Characteristics of VAWT Rotor Starter with Lift-Drag Combined Structure

Energies ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 6167
Author(s):  
Fang Feng ◽  
Guoqiang Tong ◽  
Yunfei Ma ◽  
Yan Li
Keyword(s):  
Numerical Simulation ◽  
Wind Speed ◽  
Wind Tunnel ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Speed Ratio ◽  
Static Characteristics ◽  
Torque Coefficient ◽  
Starting Characteristics ◽  
Static Torque

In order to get rid of the impact of the global financial crisis and actively respond to global climate change, it has become a common choice for global economic development to develop clean energy such as wind energy, improve energy efficiency and reduce greenhouse gas emissions. With the advantages of simple structure, unnecessary facing the wind direction, and unique appearance, the vertical axis wind turbine (VAWT) attracts extensive attention in the field of small and medium wind turbines. The lift-type VAWT exhibits outstanding aerodynamic characteristics at a high tip speed ratio, while the starting characteristics are generally undesirable at a low wind speed; thus, how to improve the starting characteristics of the lift-type VAWT has always been an important issue. In this paper, a lift-drag combined starter (LDCS) suitable for lift-type VAWT was proposed to optimize the starting characteristics of lift-type VAWT. With semi-elliptical drag blades and lift blades equipped on the middle and rear part outside the starter, the structure is characterized by lift-drag combination, weakening the adverse effect of the starter with semi-elliptical drag blades alone on the output performance of the original lift-type VAWT and improving the characteristics of the lift-drag combined VAWT. The static characteristic is one of the important starting characteristics of the wind turbine. The rapid development of computational fluid dynamics has laid a solid material foundation for VAWT. Thus the static characteristics of the LDCS with different numbers of blades were investigated by conducting numerical simulation and wind tunnel tests. The results demonstrated that the static torque coefficient of LDCS increased significantly with the increased incoming wind speed. The average value of the static torque coefficient also increased significantly. This study can provide guidelines for the research of lift-drag combined wind turbines.

Experimental Investigation of Performance Characteristics for Savonius-Style VAWTs: A Comparative Study

2021 ◽  
Author(s):  
Diplina Paul ◽  
Abhisek Banerjee
Keyword(s):  
Wind Turbines ◽  
Coefficient Of Performance ◽  
Total Power ◽  
Speed Ratio ◽  
Mechanical Loads ◽  
Tip Speed Ratio ◽  
Ac Motor ◽  
Different Types ◽  
Laminar Air Flow ◽  
Rotor Profiles

Abstract Savonius-style wind turbines are mainly gauged by two types of coefficients namely: (i) coefficient of power (CP) and (ii) coefficient of torques (CT). Coefficient of power is defined as the ratio of power generated by the turbine to the total power available to the turbine from the free-flowing wind. This is synonymous to the operational efficiency of the wind turbine. Coefficient of torque reflects the torque generating ability of the turbine. In this manuscript, experiments have been performed using three different types of rotor profiles for Savonius-style wind turbines (SSWTs) namely, classical SSWT, Benesh type SSWT and elliptical shaped SSWT using oriented jets. Using deflector plates the orientation of jets have been varied from 20° to 70°. Addition of deflector plates to the wind turbines, assists in maximizing the utilization of wind energy. Experiments have been performed in the laminar air flow. Mechanical loads have been used to study Coefficient of performance (CP) and coefficient of torque (CT) as a function of tip speed ratio (TSRs). The velocity of the wind is adjusted by varying the rheostat that controls the AC motor for the wind tunnel systems. Experimental results indicated that optimum performance could be achieved from all three types of SSWT variants at TSR ∼ 0.70. Out of the three designs studied in this manuscript, elliptic shaped SWT yielded best coefficient of performance equal to 0.39 at TSR = 0.70.

The Rotor Speed Control of 5MW Wind Turbine under Rated Wind Speed Using Adaptive-PID Controller

2012 ◽  
Vol 229-231 ◽  
pp. 2323-2326
Author(s):  
Zong Qi Tan ◽  
Can Can Li ◽  
Hui Jun Ye ◽  
Yu Qiong Zhou ◽  
Hua Ling Zhu
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Pid Controller ◽  
Turbine Rotor ◽  
Speed Ratio ◽  
Rotor Speed ◽  
Rotating Speed ◽  
Tip Speed Ratio ◽  
Variable Wind ◽  
Wind Turbine Rotor

This paper designed the controller of the wind turbine rotor rotating speed. This model of adaptive-PID through control the tip-speed ratio and count the values of PID for variable wind speed. From the result of simulation, the wind speed can run in a good dynamic characteristic, and keep the rotor running in the best tip-speed ratio at the same time.

An Experimental Study of the Aerodynamics and Performance of a Vertical Axis Wind Turbine in a Confined and Unconfined Environment

2015 ◽  
Vol 137 (5) ◽  
Author(s):  
Vincenzo Dossena ◽  
Giacomo Persico ◽  
Berardo Paradiso ◽  
Lorenzo Battisti ◽  
Sergio Dell'Anna ◽  
...  
Keyword(s):  
Experimental Study ◽  
Wind Tunnel ◽  
Wind Turbine ◽  
Vertical Axis ◽  
Tip Vortex ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Tip Speed Ratio ◽  
And Performance ◽  
Power Curves

This paper presents the results of a wide experimental study on an H-type vertical axis wind turbine (VAWT) carried out at the Politecnico di Milano. The experiments were carried out in a large-scale wind tunnel, where wind turbines for microgeneration can be tested in real-scale conditions. Integral torque and thrust measurements were performed, as well as detailed aerodynamic measurements to characterize the flow field generated by the turbine downstream of the rotor. The machine was tested in both a confined (closed chamber) and unconfined (open chamber) environment, to highlight the effect of wind tunnel blockage on the aerodynamics and performance of the VAWT under investigation. The experimental results, compared with the blockage correlations presently available, suggest that specific correction models should be developed for VAWTs. The experimental thrust and power curves of the turbine, derived from integral measurements, exhibit the expected trends with a peak power coefficient of about 0.28 at tip-speed ratio equal to 2.5. Flow measurements, performed in three conditions for tip speed ratio equal to 1.5, 2.5, and 3.5, show the fully three-dimensional character of the wake, especially in the tip region where a nonsymmetrical wake and tip vortex are found. The unsteady evolution of the velocity and turbulence fields further highlights the effect of aerodynamic loading on the wake unsteadiness, showing the time-dependent nature of the tip vortex and the onset of dynamic stall for tip speed ratio lower than 2.

Sign in / Sign up

Export Citation Format

Share Document