Description of the Geological Structure and Hydrocarbon Potential of the License Area Rusanovsky the Waters of the Kara Sea by 3d Exploration Seismic Data

2018 ◽  
Author(s):  
V.N. Borodkin ◽  
A.R. Kurchikov ◽  
V.A. Lukashov ◽  
O.A. Smirnov ◽  
A.V. Pogreckij
Keyword(s):  
Seismic Data ◽  
Geological Structure ◽  
Kara Sea ◽  
Hydrocarbon Potential ◽  
3D Exploration

scholarly journals Integrated magnetotelluric and seismic investigation of Cenozoic graben structure near Obrzycko, Poland

2021 ◽  
Author(s):  
Adam Cygal ◽  
Michał Stefaniuk ◽  
Anna Kret
Keyword(s):  
Seismic Data ◽  
Geophysical Methods ◽  
Geological Structure ◽  
Data Sets ◽  
Low Velocity ◽  
Shallow Subsurface ◽  
Geophysical Model ◽  
Novel Approach ◽  
Loose Deposits ◽  
Static Corrections

AbstractThis article presents the results of an integrated interpretation of measurements made using Audio-Magnetotellurics and Seismic Reflection geophysical methods. The obtained results were used to build an integrated geophysical model of shallow subsurface cover consisting of Cenozoic deposits, which then formed the basis for a detailed lithological and tectonic interpretation of deeper Mesozoic sediments. Such shallow covers, consisting mainly of glacial Pleistocene deposits, are typical for central and northern Poland. This investigation concentrated on delineating the accurate geometry of Obrzycko Cenozoic graben structure filled with loose deposits, as it was of great importance to the acquisition, processing and interpretation of seismic data that was to reveal the tectonic structure of the Cretaceous and Jurassic sediments which underly the study area. Previously, some problems with estimation of seismic static corrections over similar grabens filled with more recent, low-velocity deposits were encountered. Therefore, a novel approach to estimating the exact thickness of such shallow cover consisting of low-velocity deposits was applied in the presented investigation. The study shows that some alternative geophysical data sets (such as magnetotellurics) can be used to significantly improve the imaging of geological structure in areas where seismic data are very distorted or too noisy to be used alone

Reconstruction of the Reservoir Fine Structure by Using Scattering Attributes

2021 ◽  
Author(s):  
Vladimir Cheverda ◽  
Vadim Lisitsa ◽  
Maksim Protasov ◽  
Galina Reshetova ◽  
Andrey Ledyaev ◽  
...  
Keyword(s):  
Seismic Data ◽  
Numerical Experiments ◽  
Seismic Waves ◽  
Fractured Reservoirs ◽  
Three Dimensional ◽  
Geological Structure ◽  
Discrete Elements ◽  
Digital Twin ◽  
The North ◽  
Slip Surfaces

Abstract To develop the optimal strategy for developing a hydrocarbon field, one should know in fine detail its geological structure. More and more attention has been paid to cavernous-fractured reservoirs within the carbonate environment in the last decades. This article presents a technology for three-dimensional computing images of such reservoirs using scattered seismic waves. To verify it, we built a particular synthetic model, a digital twin of one of the licensed objects in the north of Eastern Siberia. One distinctive feature of this digital twin is the representation of faults not as some ideal slip surfaces but as three-dimensional geological bodies filled with tectonic breccias. To simulate such breccias and the geometry of these bodies, we performed a series of numerical experiments based on the discrete elements technique. The purpose of these experiments is the simulation of the geomechanical processes of fault formation. For the digital twin constructed, we performed full-scale 3D seismic modeling, which made it possible to conduct fully controlled numerical experiments on the construction of wave images and, on this basis, to propose an optimal seismic data processing graph.

scholarly journals The structure of the sedimentary complex of the Middle and South Caspian depressions (Azerbaijan sector)

2021 ◽  
Vol 43 (4) ◽  
pp. 199-216
Author(s):  
N.P. Yusubov ◽  
I.S. Guliyev
Keyword(s):  
Seismic Data ◽  
Oil And Gas ◽  
Sedimentary Cover ◽  
Clay Content ◽  
Geological Structure ◽  
Point Of View ◽  
South Caspian Basin ◽  
Origin And Evolution ◽  
Geological Interpretation ◽  
High Degree

The high degree of knowledge of the upper horizons of the sedimentary cover of the Middle and South Caspian depressions, given an insufficient increase in hydrocarbon reserves, leads to the need for a detailed approach to the search for oil and gas deposits in deep-seated sediments (over 6 km). During the geological interpretation of new highly informative seismic data, as well as data of deep drilling and petrological core studies, there were revealed obvious shortcomings in the concepts of the origin and evolution of the Middle and South Caspian depressions. These ideas misinterpret evolution, especially the South Caspian Basin, which is characterized by a number of unique features: very thick sedimentary cover (up to 22 km), extremely high sedimentation rate, low heat flow and reservoir temperatures, abnormally high pore and reservoir pressures, high clay content of the section, etc. The main purpose of the study was to elucidate the regional structure and features of the dissection of the sedimentary cover of the Middle and South Caspian depressions, the conditions of occurrence and distribution of facies and thicknesses of individual complexes of deposits. The paper analyzes the results of some previous studies of the geological structure of the Middle and South Caspian depressions based on the data of deep seismic sounding, seismological and gravimetric observations. We consider the main conclusions of these studies, about the geological structure of the sedimentary complex of the region’s, very outdated and subject to revision. The results of seismic stratigraphic analysis of seismic data allowed the authors to identify new data about the tectonic structure and express a completely different point of view regarding the structure of the sedimentary cover in the region. The work also touches on the issue associated with the tectonics of the region and the alleged subduction zone here.

3D PETROPHYSICS FOR HAWE: CASE STUDIES

2021 ◽  
Author(s):  
Alexander Kolomytsev ◽  
◽  
Yulia Pronyaeva Pronyaeva ◽  
Keyword(s):  
Case Studies ◽  
Seismic Data ◽  
Reservoir Characterization ◽  
Vertical Direction ◽  
Geological Structure ◽  
Current Layer ◽  
Radial Model ◽  
The Difference ◽  
Geological Concept ◽  
Property Changes

Most conventional log interpretation technics use the radial model, which was developed for vertical wells and work well in them. But applying this model to horizontal wells can result in false conclusions. The reasons for this are property changes in vertical direction and different depth of investigation (DOI) of logging tools. DOI area probably can include a response from different layers with different properties. All of this complicates petrophysical modeling. The 3D approach for high angle well evaluation (HAWE) is forward modeling in 3D. For this modeling, it is necessary to identify the geological concept near the horizontal well section using multiscale data. The accuracy of modeling depends on the details of the accepted geological model based on the data of borehole images, logs, geosteering inversion, and seismic data. 3D modeling can be applied to improve the accuracy of reservoir characterization, well placement, and completion. The radial model is often useless for HAWE because LWD tools have different DOI and the invasion zone was not formed. But the difference between volumetric and azimuthal measurements is important for comprehensive interpretation because various formations have different properties in vertical directions. Resistivity tools have the biggest DOI. It is important to understand and be able to determine the reason for changes in log response: a change in the properties of the current layer or approaching the layers with other properties. For this, it is necessary to know the distance to the boundaries of formations with various properties and, therefore, to understand the geological structure of the discovered deposits, and such information on the scale of well logs can be obtained either by modeling or by using extra deep resistivity inversion (mapping). The largest amount of multidisciplinary information is needed for modeling purposes - from images and logs to mapping and seismic data. Case studies include successful examples from Western Siberia clastic formations. In frame of the cases, different tasks have been solved: developed geological concept, updated petrophysical properties for STOIIP and completion, and provided solutions during geosteering. Multiscale modeling, which includes seismic, geosteering mapping data, LWD, and imagers, has been used for all cases.

Geological Structure and Petroleum Potential of the Kara Sea Shelf

2019 ◽  
Vol 489 (1) ◽  
pp. 1289-1293
Author(s):  
V. A. Kontorovich ◽  
A. E. Kontorovich
Keyword(s):  
Geological Structure ◽  
Kara Sea ◽  
Petroleum Potential

scholarly journals New insights into the geological structure of the Netherlands; results of a detailed mapping project

2012 ◽  
Vol 91 (4) ◽  
pp. 419-446 ◽  
Author(s):  
H. Kombrink ◽  
J.C. Doornenbal ◽  
E.J.T. Duin ◽  
M. den Dulk ◽  
J.H. ten Veen ◽  
...  
Keyword(s):  
Standard Deviation ◽  
The Netherlands ◽  
Seismic Data ◽  
Geological Structure ◽  
Geological Mapping ◽  
3D Seismic ◽  
Structural Element ◽  
Potential Reservoir ◽  
3D Seismic Data ◽  
New Reservoir

AbstractA five years geological mapping project, in which the Netherlands Continental Shelf has been re-examined using all publicly available data, resulted in an important update of the existing dataset. The stratigraphy of over 400 wells has been re-interpreted. New depth and thickness grids, based mainly on the interpretation of 3D seismic data have been produced for the most important stratigraphic intervals from Permian Upper Rotliegend to Neogene. New reservoir grids describe the top, base and thickness of 30 (potential) reservoir units in the area. In addition, the uncertainty related to interpretation and further processing of the data has been assessed. This resulted in maps displaying the standard deviation for the depth of the main stratigraphic intervals. Based on these results and the data already available for the onshore area, an updated structural element map was made for the Netherlands.

Sign in / Sign up

Export Citation Format

Share Document