scholarly journals Designing Thin 2.5D Parts Optimized for Fused Deposition Modeling

2019 ◽  
pp. 134-164 ◽  
Author(s):  
James I. Novak ◽  
Mark Zer-Ern Liu ◽  
Jennifer Loy
Keyword(s):  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Outer Wall ◽  
Fused Deposition ◽  
Design Engineers ◽  
Test Pieces ◽  
New Knowledge ◽  
Deposition Modeling ◽  
Aided Design ◽  
Reference Graph

This chapter builds new knowledge for design engineers adopting fused deposition modeling (FDM) technology as an end manufacturing process, rather than simply as a prototyping process. Based on research into 2.5D printing and its use in real-world additive manufacturing situations, a study featuring 111 test pieces across the range of 0.4-4.0mm in thickness were analyzed in increments of 0.1mm to understand how these attributes affect the quality and print time of the parts and isolate specific dimensions which are optimized for the FDM process. The results revealed optimized zones where the outer wall, inner wall/s, and/or infill are produced as continuous extrusions significantly faster to print than thicknesses falling outside of optimized zones. As a result, a quick reference graph and several equations are presented based on fundamental FDM principles, allowing design engineers to implement optimized wall dimensions in computer-aided design (CAD) rather than leaving print optimization to technicians and manufacturers in the final process parameters.

scholarly journals Desain dan Pembuatan Prototype Piston Honda MEGAPRO FI Menggunakan 3D Printing

2020 ◽  
Vol 1 (2) ◽  
pp. 81-91
Author(s):  
Frince Marbun ◽  
Richard A.M. Napitupulu
Keyword(s):  
3D Printing ◽  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Layer By Layer ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Manufacturing Technologies ◽  
Aided Design

3D printing technology has great potential in today's manufacturing world, one of its uses is in making miniatures or prototypes of a product such as a piston. One of the most famous and inexpensive 3D printing (additive manufacturing) technologies is Fused Deposition Modeling (FDM), the principle FDM works by thermoplastic extrusion through a hot nozzle at melting temperature then the product is made layer by layer. The two most commonly used materials are ABS and PLA so it is very important to know the accuracy of product dimensions. FDM 3D Printing Technology is able to make duplicate products accurately using PLA material. FDM machines work by printing parts that have been designed by computer-aided design (CAD) and then exported in the form of STL or .stl files and uploaded to the slicer program to govern the printing press according to the design. Using Anet A8 brand 3D printing tools that are available to the public, Slicing of general CAD geometry files such as autocad and solidwork is the basis for making this object. This software is very important to facilitate the design process to be printed. Some examples of software that can be downloaded and used free of charge such as Repetier-Host and Cura. by changing the parameters in the slicer software is very influential in the 3D printing manufacturing process.

scholarly journals The Effects of Combined Infill Patterns on Mechanical Properties in FDM Process

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 2792
Author(s):  
Mohammadreza Lalegani Dezaki ◽  
Mohd Khairol Anuar Mohd Ariffin
Keyword(s):  
Mechanical Properties ◽  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Strength Analysis ◽  
Element Analysis ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
3D Printed ◽  
Complex Features ◽  
Aided Design

Fused deposition modeling (FDM) is commonly used to print different products with highly complex features. Process parameters for FDM are divided into controllable or uncontrollable parameters. The most critical ones are built orientation, layer thickness, infill pattern, infill density, and nozzle diameter. This study investigates the effects of combined infill patterns in 3D printed products. Five patterns (solid, honeycomb, wiggle, grid, and rectilinear) were combined in samples to analyze their effects on mechanical properties for tensile strength analysis. Polylactic acid (PLA) samples were printed in different build orientations through two directions: flat and on-edge. The limitation was that the software and machine could not combine the infill patterns. Thus, the patterns were designed and assembled in computer aided design (CAD) software. Finite element analysis (FEA) was used to determine the patterns’ features and results showed honeycomb and grid have the highest strength while their weights were lighter compared to solid. Moreover, 0° samples in both flat and on-edge direction had the strongest layer adhesion and the best quality. In contrast, perpendicular samples like 60° and 75° showed poor adhesion and were the weakest specimens in both flat and on-edge, respectively. In brief, by increasing the build orientation, the strength decreases in this study.

scholarly journals Compatibility of a Silicone Impression/Adhesive System to FDM-Printed Tray Materials—A Laboratory Peel-off Study

Materials ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 1905 ◽  
Author(s):  
Yichen Xu ◽  
Alexey Unkovskiy ◽  
Felix Klaue ◽  
Frank Rupp ◽  
Juergen Geis-Gerstorfer ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Adhesive System ◽  
Material Interface ◽  
Fused Deposition ◽  
Before And After ◽  
Light Curing ◽  
Deposition Modeling ◽  
Aided Design

Computer-aided design (CAD) and additive manufacturing (AM) have shown promise in facilitating the fabrication of custom trays. Due to the clinical requirements, custom tray materials should achieve good bonding to the impression/adhesive systems. This study evaluated the retention of three fused deposition modeling (FDM) custom tray materials to a silicone impression/adhesive system before and after gritblasting (GB) by peel-off test. CAD-designed experimental test blocks were printed by FDM using acrylonitrile butadiene styrene (ABS), polyethylene terephthalate glycol copolyester (PETG), and high impact polystyrene (HIPS), and the reference test blocks were made of a conventional light-curing resin (n = 11). Before and after GB, the surface topography of all tray materials was analysed, and the maximum strength of the test block peeled off from a silicone impression/adhesive system was measured. After GB, the arithmetic mean height (Sa) and the valley fluid retention index (Svi) of the four material groups declined (p < 0.05). The peel-off strength of each of the four material groups significantly decreased by GB (p < 0.05), but no statistical difference could be found among them before or after GB. In all peel-off tests, adhesive failure occurred at the adhesive-impression material interface. The results indicated ABS, HIPS, and PETG could provide sufficient adhesion to the adhesive as the conventional light-curing resin, and GB could reduce the roughness generated by FDM and weaken the bonding between the adhesive and the silicone impression.

scholarly journals From materials to devices using fused deposition modeling: A state-of-art review

2020 ◽  
Vol 9 (1) ◽  
pp. 1594-1609
Author(s):  
Pengfei Zhang ◽  
Zongxing Wang ◽  
Junru Li ◽  
Xinlin Li ◽  
Lianjun Cheng
Keyword(s):  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Polymeric Materials ◽  
3D Printer ◽  
Printing Process ◽  
Fused Deposition ◽  
The Past ◽  
Resolution Improvement ◽  
Deposition Modeling ◽  
Aided Design

Abstract Fused deposition modeling (FDM) uses computer-aided design to direct a 3D printer to build successful layers of product from polymeric materials to generate 3D devices. Many reviews have been reported recently on the cutting-edge FDM technology from different perspectives. However, few studies have delved into the advances in FDM technology from materials to 3D devices. Therefore, in this work, with a bottom-up approach from materials (including commodities and nanomaterials) to printing process (including effort for fast printing, effort for resolution improvement, and simulations) and from printing process to 3D devices (including biomedical implants, topological structures, and multifunctional devices), it aims at reviewing the FDM technology developed over the past decades.

scholarly journals Some Investigations on Geometric Conformity Analysis of a 3-D Freeform Objects Produced by Rapid Prototyping (FDM) Process

2012 ◽  
pp. 201-205
Author(s):  
V. Vinod Kumar ◽  
G. R. N. Tagore ◽  
A. Venugopal
Keyword(s):  
Rapid Prototyping ◽  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Cad Model ◽  
Fused Deposition ◽  
Computer Aided ◽  
Deposition Modeling ◽  
Geometric Deviation ◽  
Aided Design ◽  
Computer Aided Inspection

Rapid prototyping technology is widely used to fabricate 3-D objects with all features of a design using Computer Aided Design (CAD) model. The final fabricated object with rapid prototyping technique has to be evaluated regarding the extent of its closeness to CAD model. Geometric conformity analysis has to be used in determining a measure of the geometric deviation between designed and fabricated 3-D models. In this paper evaluation technique is used to provide an aggregate measure of overall geometric deviation between designed free formed surface and its fabricated geometries using Fused Deposition Modeling (FDM) technique. This approach is typically utilized for large or more complex assemblies such as vehicle interiors and exteriors and full scale aircraft etc. Computer Aided Inspection with CMM aims at development of suitable methodology so as to convert data obtained from CMM to convenient formats to measure dimensional and form errors of freeform surface objects. The present work used in additive manufacturing with the newer methodology of inspecting in rapid product development also.

Carbon Nanotube Reinforced Fused Deposition Modeling Using Microwave Irradiation

2016 ◽  
Author(s):  
Meng Zhang ◽  
Xiaoxu Song ◽  
Weston Grove ◽  
Emmett Hull ◽  
Z. J. Pei ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Additive Manufacturing ◽  
Microwave Irradiation ◽  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Layer By Layer ◽  
Sem Images ◽  
Fused Deposition ◽  
Deposition Modeling

Additive manufacturing (AM) is a class of manufacturing processes where material is deposited in a layer-by-layer fashion to fabricate a three-dimensional part directly from a computer-aided design model. With a current market share of 44%, thermoplastic-based additive manufacturing such as fused deposition modeling (FDM) is a prevailing technology. A key challenge for AM parts (especially for parts made by FDM) in engineering applications is the weak inter-layer adhesion. The lack of bonding between filaments usually results in delamination and mechanical failure. To address this challenge, this study embedded carbon nanotubes into acrylonitrile butadiene styrene (ABS) thermoplastics via a filament extrusion process. The vigorous response of carbon nanotubes to microwave irradiation, leading to the release of a large amount of heat, is used to melt the ABS thermoplastic matrix adjacent to carbon nanotubes within a very short time period. This treatment is found to enhance the inter-layer adhesion without bulk heating to deform the 3D printed parts. Tensile and flexural tests were performed to evaluation the effects of microwave irradiation on mechanical properties of the specimens made by FDM. Scanning electron microscopic (SEM) images were taken to characterize the fracture surfaces of tensile test specimens. The actual carbon nanotube contents in the filaments were measured by conducting thermogravimetric analysis (TGA). The effects of microwave irradiation on the electrical resistivity of the filament were also reported.

Fabrication of Biomimetic Scaffolds With Well-Defined Pore Geometry by Fused Deposition Modeling

2007 ◽  
Author(s):  
Esmaiel Jabbari ◽  
David N. Rocheleau ◽  
Weijie Xu ◽  
Xuezhong He
Keyword(s):  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Pore Geometry ◽  
Micro Computed Tomography ◽  
Fused Deposition ◽  
Biomimetic Scaffolds ◽  
Orthogonal Geometry ◽  
Deposition Modeling ◽  
Functional Peptides ◽  
Homogeneous Formation

It is well established that the pore size and distribution affect the rate of cell migration and the extent of extracellular matrix formation. The objective of this work was to develop a process for fabrication of biodegradable and shape-specific polymeric scaffolds with well-defined pore geometry, functionalized with covalently attached bioactive peptides, for applications in tissue regeneration. We have used the Fused Deposition Modeling (FDM) RP technology to fabricate degradable and functional scaffolds with well-defined pore geometry. Computer aided design (CAD) using SolidWorks was used to create models of the cubic orthogonal geometry. The models were used to create the machine codes necessary to build the scaffolds with FDM with wax as the build material. A novel biodegradable in-situ crosslinkable macromer, poly(lactide-co-glycolide fumarate) or PLGF, mixed with reactive functional peptides was infused in the scaffold and allowed to crosslink. The scaffold was then immersed in a hydrocarbon solvent to remove the wax, leaving just the PLGF behind as the support material dissolved. The pore morphology of the PLGF scaffold was imaged with micro-computed tomography and scanning electron microscopy. Cellular function in the PLFG scaffolds with well-defined pore geometry was studied with bone marrow stromal cells isolated from rats. Results demonstrate that the scaffolds support homogeneous formation of mineralized tissue.

A CAD-based approach for measuring volumetric error in layered manufacturing

2016 ◽  
Vol 231 (13) ◽  
pp. 2398-2406 ◽  
Author(s):  
Biranchi Narayan Panda ◽  
Raju MVA Bahubalendruni ◽  
Bibhuti Bhusan Biswal ◽  
Marco Leite
Keyword(s):  
Rapid Prototyping ◽  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Layered Manufacturing ◽  
Design Model ◽  
Volumetric Error ◽  
Build Orientation ◽  
Fused Deposition ◽  
Computer Aided ◽  
Aided Design

Rapid prototyping uses layered manufacturing technology to produce functional parts directly from 3D computer-aided design model without involving any tools and human intervention. Due to layer by layer deposition, volumetric error remains in the part which is basically the volumetric difference between computer-aided design model and the fabricated part. This volumetric error causes poor dimensional accuracy and surface finish, which has limited the widespread applications of rapid prototyping. Although rapid prototyping is able to produce functional parts in less build time with less material wastage, today many industries are looking for better surface quality associated with these parts. Literature discloses that the part quality can be improved by selecting proper build orientation that corresponds to minimum volumetric error. In support of this, current study presents a computer-aided design-based novel methodology to precisely measure the volumetric error in layered manufacturing process, in particular fused deposition modeling process. The proposed method accepts computer-aided design model of the part in .CAT format and automatically calculates volumetric error for different build orientations. An Excel function is integrated with it to determine optimum build orientation based on minimum volumetric error. Several simple and complex examples verified the robustness of our proposed methodology. We anticipate that the current invention will help future rapid prototyping users in producing high-quality products through an intelligent process planning.

Modeling Machine Motion and Process Parameter Errors for Improving Dimensional Accuracy of Fused Deposition Modeling Machines

2018 ◽  
Vol 140 (12) ◽  
Author(s):  
Jiaqi Lyu ◽  
Souran Manoochehri
Keyword(s):  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Dimensional Accuracy ◽  
Processing Parameters ◽  
Error Model ◽  
Fused Deposition ◽  
Model Combining ◽  
Before And After ◽  
Deposition Modeling ◽  
Integrated Error

The dimensional accuracy of fused deposition modeling (FDM) machines is dependent on errors caused by processing parameters and machine motions. In this study, an integrated error model combining these effects is developed. Extruder temperature, layer thickness, and infill density are selected as parameters of this study for three FDM machines, namely, Flashforge Finder, Ultimaker 2 go, and XYZ da Vinci 2.0 Duo. Experiments have been conducted using Taguchi method and the interactions between processing parameters are analyzed. Based on the dimensional deviations between fabricated parts and the computer aided design (CAD) geometry, a set of coefficients for the integrated error model are calculated to characterize each machine. Based on the results of the integrated error model, the original CAD geometry is optimized for fabrication accuracy on each machine. New parts are fabricated using the optimized CAD geometries. Through comparing the dimensional deviations of parts fabricated before and after optimization, the effectiveness of the integrated error model is analyzed and demonstrated for the three FDM machines.

Fabrication and Design of Customized Maxillofacial Biomodel for Implant Using Computer Aided Design and Rapid Prototyping Technique

2013 ◽  
Vol 391 ◽  
pp. 406-409 ◽  
Author(s):  
Wan Yusoff Way ◽  
M. Aichouni ◽  
M. Zul Amzar Zulkiflee ◽  
Mohd Sallehuddin Ahmad Derifaee
Keyword(s):  
Rapid Prototyping ◽  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Dimensional Accuracy ◽  
Design Technology ◽  
Fused Deposition ◽  
Computer Aided ◽  
Analysis Computer ◽  
Operational Error ◽  
Aided Design

The purpose of this research is to fabricate bio-model that based on Rapid Prototyping technology which is by using Fused Deposition Modeling (FDM) and designing an implant by using a Computer Aided Design technology. A case study from Hospital Kuala Lumpur which is the maxillofacial will be fabricated by using FDM technique. The completed 3D prototype or biomodel will be analyzed to makes the result more truthful in terms of the dimensional accuracy, operational error and cost analysis. Computer aided design technology is used to design the customized implant in order to replace the fractured maxilla part.

Sign in / Sign up

Export Citation Format

Share Document