Creativity with Building Information Modelling Tools

2013 ◽  
Vol 2 (1) ◽  
pp. 1-10 ◽  
Author(s):  
A.M. Ahmad ◽  
P. Demian ◽  
A.D.F. Price

Whilst the application of BIM continues to be acknowledged and prevailing, design practitioners and academics find themselves in a paradox with an on-going discussion on the impact of BIM tools on design creativity and innovation. Literature suggests that BIM tools can hinder design creativity due to: parametric limitations; interoperability; and the demand for detailed information at preliminary design stages. However, other literature shows that BIM tools increase design creativity, and at some point provide limitless opportunities to be creative. The aim of this paper is to identify and verify the impact of BIM tools on design creativity. It is important for architectural students and practioners to be aware of the impact of BIM tools on the design. A literature review was used to identify the benefits and constraints of BIM tools on design creativity; a questionnaire survey was used to verify its impact. The questionnaire survey was conducted with the top 100 UK architectural firms (group one) and CNBR Yahoo Group (group two). It was found that BIM tools do not affect design creativity and innovation in the opinion of the respondents. This paper enlightens the status-quo of BIM tools on creativity and innovation, but will focus on the impact of BIM tools on architectural design creativity in the early design phase more closely. This research would be important to both academics and architectural designers using BIM in their various applications.

2019 ◽  
Vol 19 (3) ◽  
pp. 465-490 ◽  
Author(s):  
Abdullahi Babatunde Saka ◽  
Daniel W.M. Chan

Purpose This paper aims to review the status of development of building information modelling (BIM), its trends and themes across the six continents of the world. Design/methodology/approach A total of 914 journal articles sought from the search engine of Web of Science (WOS) based on the country/region option of the WOS to group them into continents. A best-fit approach was then applied in selecting the suitable software programmes for the scientometric analysis and comparisons and deductions were made. Findings The findings revealed that there are differences in the development of BIM across the six continents of the world. South America and Africa are lagging in the BIM research and Australia and Asia are growing, whilst Europe and North America are ahead. In addition, there exist differences in the research themes and trends in these continents as against the single view presented in extant studies. Originality/value This study introduced a new approach to carry out a comparative and taxonomic review and has provided both academic researchers and industrial practitioners with a clear status of development of BIM research and the trend across the six continents of the world.


2015 ◽  
Vol 10 (2) ◽  
pp. 196-203 ◽  
Author(s):  
Reo Kimura ◽  
◽  
Munenari Inoguchi ◽  
Keiko Tamura ◽  
Haruo Hayashi ◽  
...  

This study focuses on recovery efforts following the Mid-Niigata Earthquake in October 2004 and the Chuetsu-Oki Earthquake in July 2007 in Niigata Prefecture. Results of a randomsample questionnaire survey conducted in affected areas and throughout the prefecture are analyzed using a life recovery calendar, which identifies disaster damage in affected areas and in Niigata with the objective of systematically understanding the status and process of rebuilding lives. Although the magnitude of devastation and the nature of the disasters differ, both have similar life recovery processes. It is to be noted, however, that the impact of the Mid-Niigata Earthquake lingered over a larger area for a longer period than for the Chuetsu-Oki Earthquake.


Author(s):  
Tochukwu Moses ◽  
David Heesom ◽  
David Oloke

It is clear that challenging economic times inspire innovative abilities and solutions in the construction industry. In particular many of these innovations focus on cost implications, saving project time, reducing or eliminating waste, increasing productivity or redefining value. There is increasing pressure in the UK construction industry for new construction innovations, technology and processes with ability to lever a significant impact relative to disrupting the existing status quo; creating solutions that promote construction efficiencies deploying means to exploiting offsite construction approaches. The increased concern and challenge globally is that as knowledge and experience grows, the offsite manufacturers and suppliers are expected to demonstrate absolute innovative solutions that will heighten the proportion of project value being delivered through the use of offsite solutions on the bases that it makes sound project and business sense. Unparalleled huge cost saving benefits to clients and end users which is more than just creating a model is yet to be realized.


2021 ◽  
Author(s):  
◽  
Maya Robinson

<p>Digital fabrication has become a common way of producing and constructing designs more efficiently, challenging the traditional methods of construction, and the way we design. Despite the new technologies used to enhance the design process, there is still a disconnect between design and construction. Building Information Modelling (BIM) has been a step towards creating a more fluid workflow. However, it is not currently being fully utilised within New Zealand. Along with a lack of interoperability, this has contributed to the limited productivity of the construction industry. The ability to take a BIM model direct to manufacture is critical to leverage the information of the model and reduce expensive remodelling. The use of BIM tools not only aims to maximise efficiency when delivering a project but also provides a new way of working and a solution to improve file-to-factory production.   Design for Manufacture and Assembly (DfMA), although relatively new to the architecture and building industry, could have substantial benefits for the way architecture projects are designed and constructed. This process consists of a set of guidelines that take into consideration the manufacturability and assembly of the design from the very beginning. Qualitative and experimental methods have been used for initial and developed testing drawn from case studies, a review of the literature, and data from interviews with industry professionals. Five interviews were conducted with industry professionals across the design to manufacturing spectrum. The interviews identified current issues within the architecture and building industry directly related to file-to-factory.   A new file-to-factory workflow has been developed utilising BIM tools and DfMA principles to explore the impact this process could have on the buildings we design and construct in New Zealand. The workflow does not consist of new processes or tools but instead couples the two together. By utilising the existing BIM technology and implementing DfMA, this means the designer can consider both the requirements of the design and how the design will be manufactured and assembled. The collaborative workflow can eliminate the need for remodelling, and reduce errors, cost, and time. This is significant to the industry because it begins to streamline the design-to-construction process and allow for the industry to grow, advance, and increase productivity.</p>


2020 ◽  
Vol 5 (2) ◽  
pp. 1-11
Author(s):  
Nadzirah Zainordin ◽  
◽  
Zamzarina Md Judyar ◽  
Nur Syahirah Zafarull ◽  
Nor Azizah Zalin ◽  
...  

This study begins with a broad literature review to understand the Building Information Modelling (BIM) concept. Quantity Surveyors star as an influential role as qualified, trained, and proficient in dealing with glitches relating to construction expenditure, supervision, and consultation in the construction industry. When the task is getting crucial, an assistant from technology may help faster and smoother the process and task. This study aims to investigate an understanding of the application of BIM among Quantity Surveyor in Malaysia. According to the Board of Quantity Surveyors, Malaysia's official website, 101 registered Quantity Surveying Consultant firms were in 2018. This study targeted 1000 persons from different firms and expected to respond from at least 278 persons due to time constraints. The other criteria of the respondents include years of experience in the industry. Quantity Surveying Consultant firms would be the most suitable people to answer a questionnaire survey for this study. The registered Quantity Surveying Consultant firms are very well proficient in the quantity surveying practice and services. Therefore, by choosing Quantity Surveying Consultant firms to be the respondent may help in getting the most consistent answer and higher accuracy of the exploration of Quantity Surveyors productivity by adopting the Building Information Modelling (BIM) concept in Quantity Surveyor, which will further enhance the awareness of benefits of BIM to the Quantity Surveyor profession itself.


2021 ◽  
Vol 13 (16) ◽  
pp. 8887
Author(s):  
Oludolapo Ibrahim Olanrewaju ◽  
Ahmed Farouk Kineber ◽  
Nicholas Chileshe ◽  
David John Edwards

The Architecture, Engineering, Construction and Operations (AECO) industry is generally slow in adopting emerging technologies, and such hesitance invariably restricts performance improvements. A plethora of studies have focused on the barriers, Critical Success Factors (CSFs), lifecycle and drivers independently, but none have explored the impact of BIM drivers and awareness on the project lifecycle. This study empirically explored the impact of BIM drivers and awareness on the project lifecycle using Structural Equation Modelling (SEM). Initially, a conceptual model was developed from an extensive literature review. Thereafter, the model was tested using primary questionnaire data obtained from 90 construction professionals in Lagos, Nigeria. Emergent findings indicate that Building Information Modelling (BIM) drivers have a high impact on BIM awareness at the operation stage of the project lifecycle. The SEM model has an average R2 value of 23% which is moderate. Consequently, this research contributes to the existing body of knowledge by providing invaluable insight into the impact of BIM drivers on BIM awareness in the project lifecycle. Knowledge acquired will help industry stakeholders and government to develop appropriate policies to increase BIM uptake within contemporary practice.


Buildings ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 85 ◽  
Author(s):  
Saka ◽  
Chan

Building Information Modelling (BIM) has been gaining widespread adoption in the Architecture, Engineering, and Construction (AEC) industry across the globe. Consequently, several research studies have attempted to construct a holistic review of the increasing BIM publications to identify the development trend using manual review, scientometric review, bibliometric review, or latent semantic review. These extant studies have often adopted a global view of the development despite the adoption of BIM varying across firms, countries, and continents. This approach is often regarded as not representative of the BIM development in countries and continents at the infancy stage. As BIM is still at the germinating stage of development in Africa and previous reviews are unrepresentative of BIM development in the AEC industry of Africa. This paper aims to present a scientometric review and metasynthesis of BIM development in the African AEC industry to explore the intellectual evolution of BIM, the status quo of BIM across the regions, and any potential barriers hindering BIM proliferation. The review findings revealed a varying level of BIM growth, with North Africa, West Africa, and Southern Africa leading the research development, whilst East Africa and Central Africa are slightly lagging behind. Additionally, the major challenges facing BIM adoption was found as people/process-related barriers. This study has provided valuable insights into BIM development and application in the growing African AEC industry.


Sign in / Sign up

Export Citation Format

Share Document