Ultrasonic Pulse Velocity for In Situ Measurement of Compressive Strength of Concrete

2007 ◽  
pp. 55-61
Author(s):  
C.A. Chidolue ◽  
B.A. Chidolue ◽  
S.N. Umenwaliri
Keyword(s):  
Compressive Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
In Situ Measurement ◽  
Compressive Strength Of Concrete

scholarly journals An approach to in-situ compressive strength of concrete

2016 ◽  
Vol 64 (4) ◽  
pp. 687-695 ◽  
Author(s):  
L. Brunarski ◽  
M. Dohojda
Keyword(s):  
Compressive Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Velocity Measurements ◽  
Indirect Methods ◽  
Rebound Hammer ◽  
Compressive Strength Of Concrete ◽  
Non Destructive

Abstract The paper presents the problem of estimating in-situ compressive strength of concrete in a comprehensive way, taking into account the possibility of direct tests of cored specimens and indirect methods of non-destructive tests: rebound hammer tests and ultrasonic pulse velocity measurements. The paper approaches the discussed problem in an original, scientifically documented and exhaustive way, in particular in terms of application.

scholarly journals Using Support Vector Machine to Improve Ultrasonic Pulse Velocity Test for Concrete

2018 ◽  
Vol 207 ◽  
pp. 01001
Author(s):  
Tu Quynh Loan Ngo ◽  
Yu-Ren Wang
Keyword(s):  
Compressive Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Support Vector ◽  
Non Destructive Testing ◽  
Testing Methods ◽  
Destructive Testing ◽  
Compressive Strength Of Concrete ◽  
Non Destructive

In the construction industry, to evaluate the compressive strength of concrete, destructive and non-destructive testing methods are used. Non-destructive testing methods are preferable due to the fact that those methods do not destroy concrete samples. However, they usually give larger percentage of error than using destructive tests. Among the non-destructive testing methods, the ultrasonic pulse velocity test is the popular one because it is economic and very simple in operation. Using the ultrasonic pulse velocity test gives 20% MAPE more than using destructive tests. This paper aims to improve the ultrasonic pulse velocity test results in estimating the compressive strength of concrete using the help of artificial intelligent. To establish a better prediction model for the ultrasonic pulse velocity test, data collected from 312 cylinder of concrete samples are used to develop and validate the model. The research results provide valuable information when using the ultrasonic pulse velocity tests to the inputs data in addition with support vector machine by learning algorithms, and the actual compressive strengths are set as the target output data to train the model. The results show that both MAPEs for the linear and nonlinear regression models are 11.17% and 17.66% respectively. The MAPE for the support vector machine models is 11.02%. These research results can provide valuable information when using the ultrasonic pulse velocity test to estimate the compressive strength of concrete.

Ultrasonic Pulse Velocity for In Situ Measurement of Compressive Strength of Concrete

2007 ◽  
Vol 18-19 ◽  
pp. 55-61 ◽  
Author(s):  
C.A. Chidolue ◽  
B.A. Chidolue ◽  
S.N. Umenwaliri
Keyword(s):  
Aggregate Size ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Direct Transmission ◽  
Indirect Transmission ◽  
Mix Proportion ◽  
Compressive Strength Of Concrete ◽  
A Site

In this study, pulse velocities calculated from the time taken by pulses emitted by a transducer to traverse a known thickness of the concrete is utilized in building up a correlation between pulse velocity and strength of concrete cubes and between pulse velocity and age of concrete. Three different arrangements of transmitters and receivers were studied to cover the varieties of problems likely to be encountered on a site. These are direct transmission, semi-direct transmission and indirect transmission. For a particular mix proportion and aggregate size a calibration curve was obtained for in-situ testing of concrete. These curves can be used to determine the relative in-situ strength of similar members or structures.

scholarly journals Empirical Investigation on Compressive Strength of Geopolymer and Conventional Concretes by Nondestructive Method

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
B. Ravali ◽  
K. Bala Gopi Krishna ◽  
D. Ravi Kanth ◽  
K. J. Brahma Chari ◽  
S. Venkatesa Prabhu ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Nondestructive Method ◽  
Geopolymer Concrete ◽  
River Sand ◽  
Rebound Hammer ◽  
Compressive Strength Of Concrete

Need of construction is increasing due to increase in population growth rate. The geopolymer concrete is eco-friendly than ordinary concrete. Current experimental investigation was conducted on ordinary and geopolymer concrete using nondestructive testing (NDT) tests like ultrasonic pulse velocity (UPV) test and rebound hammer (RH) test. Cube specimens of dimensions 150 mm × 150 mm × 150 mm are used to conduct these tests at 7, 14, and 28 days. Proportions considered for concrete are cement-fly ash-river sand (100-0-100% and 60-40-100%), cement-fly ash-robo sand (100-0-100% and 60-40-100%) whereas geopolymer concrete fly ash-metakaolin is taken in proportions of 100-0%, 60-40%, and 50-50%. Alkaline activators (sodium hydroxide and sodium silicate with molarity 12M) were used in preparing geopolymer concrete. The major objective of the current study is to obtain relation between compressive strength of concrete and UPV values.

scholarly journals The relationship between the compressive strength and ultrasonic pulse velocity concrete with fibers exposed to high temperatures

2018 ◽  
Vol 3 (1) ◽  
pp. 31
Author(s):  
Belaribi Hassiba ◽  
Mellas Mekki ◽  
Rahmani Fraid
Keyword(s):  
Compressive Strength ◽  
Ultrasonic Velocity ◽  
High Temperatures ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Cement Ratio ◽  
Compressive Strength Of Concrete ◽  
The Relationship ◽  
The Waves

The paper analyses the effects of high temperatures on the concrete residual strength using ultrasonic velocity (UPV). An experimental investigation was conducted to study the relationship between UPV residual data and compressive strength of concrete with different mixture proportions, cubic specimens with water-cement ratio of 0.35. They were heated in an electric furnace at temperatures ranging from 200°C to 600°C. In this experiment a comparison was made between the four groups which include two types of fibers steel 0,19%, 0,25% and 0,5%, polypropylene: 0,05%, 0,11% 0,16 % by volume. Cube specimens were tested in order to determine ultrasonic velocity. The compressive strength was tested too. According to the results, relations were established between ultrasonic velocity in the specimens and the compressive strength at different temperature and the range of the velocity of the waves were also determined for this kind of concrete. Result of the test showed that UPV test can be successfully used in order to verify the consistency of structures damaged by fire.

Effect of Elevated Temperature on the Strength and Ultrasonic Pulse Velocity of Glass Fiber and Nano-Clay Concrete

2010 ◽  
Vol 163-167 ◽  
pp. 1532-1539 ◽  
Author(s):  
Chung Ming Ho ◽  
Wei Tsung Tsai
Keyword(s):  
Compressive Strength ◽  
Glass Fiber ◽  
Residual Strength ◽  
Elevated Temperatures ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Nano Clay ◽  
Compressive Strength Of Concrete ◽  
Temperature Exposure

The objectives of this paper are to find the strength and ultrasonic pulse velocity (UPV) of concrete adding admixtures by glass fiber and nano-clay. Residual strength and residual UPV of concrete specimens subjected to elevated temperatures are investigated. Experiment results showed that adding glass fiber and nano-clay would be beneficial for the later-age compressive strength of concrete. Adding nano-clay could considerably increase the flexural and split strength and the toughness of concrete. It is revealed that adding nano-clay could significantly maintain residual compressive and split strength of specimens after high temperature exposure. Regression analysis results revealed that the residual strength and residual UPV of concrete specimens had a high relevance after elevated temperatures exposure.

scholarly journals Empirical Formula for Assessment Concrete Compressive Strength by Using Ultrasonic Pulse Velocity

2018 ◽  
Vol 7 (4.20) ◽  
pp. 113
Author(s):  
Hameed Shakir Al-Aasm
Keyword(s):  
Compressive Strength ◽  
Empirical Formula ◽  
Salt Content ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Fine Aggregate ◽  
Acceptable Error ◽  
Statistical Program ◽  
Compressive Strength Of Concrete

Statistical practical program was carried out to establish a fairly accurate empirical formula between compressive strength of concrete and ultrasonic pulse velocity. The work has a strong empirical base, but it is firmly governed by theory. In concrete, the compressive strength of concrete is related to the type, proportion and physical properties of aggregate but it is well known to be intensely affected by the properties of the cement paste, which relate, mainly, to the w/c ratio. The other variables such as age and density of concrete, salt content in fine aggregate and curing method have a relatively little effect on compressive strength of concrete. Therefore, the program involves field testing of reinforced concrete members that their w/c ratio and cube uniaxial compressive strength are known. The results were used as input data in statistical program (SPSS) to develop an empirical formula between the compressive strength of concrete and ultrasonic pulse velocity. The proposed formula was confirmed by the results of previous experiments. Although the relationship between the compressive strength of concrete and ultrasonic pulse velocity physically indirect, the statistical program revealed that the pulse velocity test could be used with acceptable error in evaluating the compressive strength of concrete.  

Sign in / Sign up

Export Citation Format

Share Document