Primary Study of an Injectable In Situ Composite of Collagen/Calcium Phosphate Porous Scaffold for Bone Substitute

Author(s):  
Q. Yao ◽  
Dong Xiao Li ◽  
K.W. Liu ◽  
Bo Zhang ◽  
H. Li ◽  
...  
2006 ◽  
Vol 309-311 ◽  
pp. 857-860 ◽  
Author(s):  
Q. Yao ◽  
Dong Xiao Li ◽  
K.W. Liu ◽  
Bo Zhang ◽  
H. Li ◽  
...  

This study was to develop an injectable biocompatible and porous calcium phosphate collagen composite cement scaffold by in situ setting. TTCP was prepared as main material of the CPC powder, and the collagen solution was added into the phosphoric acid directly to form the liquid phase. The injectable time (tI), setting time (tS) and setting temperature (TS), along with the PH value were recorded during the setting process. The compressive strength, morphology and porosity were tested. With the increase of collagen, this novel CPC get a tI of 5mins to 8mins, tS of 20mins to 30mins, compressive strength from 1.5MPa to 4MPa, and the porosity from 40% to 60%. This study gave a possibility to form a porous scaffold of collagen/CPC composite with the nature of injectability and setting in situ.


1998 ◽  
Vol 550 ◽  
Author(s):  
D. Knaack ◽  
D.D. Lee

Abstractα-BSM™ is an injectable endothermically setting calcium phosphate bone substitute. α-BSM™ has been shown to be effective in promoting the healing of surgically created critical size defects and restoring bone biomechanical strength in several animal models. It has received regulatory clearance for orthopedic indications in both Canada and Europe and for dental and craniofacial indications in the United States.α-BSM™ is distinguished as a bone substitute by its prolonged working time at room temperature, and rapid hardening at body temperature. These properties, as well as its compatibility with a variety of aqueous hydrating agents, make α-BSM™ an attractive vehicle for the in situ delivery of therapeutic agents. In vitro studies have shown that antibiotics, such as gentamicin, can be stably incorporated into α-BSM™ prior to and during hardening, and that delivery kinetics can be controlled with the appropriate formulation and preparative procedures. The setting reaction is also compatible with biologically active proteins. rhBMP-2 has been incorporated into α-BSM™ and was demonstrated to be effective in stimulating ectopic bone formation in soft tissue and accelerating the restoration of a differentiated phenotype in a rabbit osteotomy model.


2020 ◽  
Author(s):  
Isabel Pereira ◽  
José Eduardo Pereira ◽  
Luís Maltez ◽  
Alexandra Rodrigues ◽  
Catarina Rodrigues ◽  
...  

Abstract The development of injectable bone substitutes (IBS) have obtained great importance in the bone regeneration field, as a strategy to reach hardly accessible defects using minimally invasive techniques and able to fit to irregular topographies. In this scenario, the association of injectable hydrogels and bone graft granules is emerging as a well-established trend. Particularly, in situ forming hydrogels have arisen as a new IBS generation. An in situ forming and injectable dextrin-based hydrogel (HG) was developed, aiming to act as a carrier of granular bone substitutes and bioactive agents. In this work, the HG was associated to a granular bone substitute (Bonelike®) and implanted in goat critical-sized calvarial defects (14 mm) for 3, 6 and 12 weeks. The results showed that HG improved the handling properties of the Bonelike® granules and did not affect its osteoconductive features, neither impairing the bone regeneration process. Human multipotent mesenchymal stromal cells from the umbilical cord, extracellular matrix hydrolysates and the pro-angiogenic peptide LLKKK18 were also combined with the IBS. These bioactive agents did not enhance the new bone formation significantly under the conditions tested, according to micro-computed tomography and histological analysis.


2007 ◽  
Vol 22 (2) ◽  
pp. 428-436 ◽  
Author(s):  
S. Jayalakshmi ◽  
J.P. Ahn ◽  
K.B. Kim ◽  
E. Fleury

We report the hydrogenation characteristics and mechanical properties of Ti50Zr25Cu25 in situ composite ribbons, composed of β-Ti crystalline phase dispersed in an amorphous matrix. Upon cathodic charging at room temperature, high hydrogen absorption up to ∼60 at.% (H/M = ∼1.2) is obtained. At such a high concentration, hydrogen-induced amorphization occurs. Mechanical tests conducted on the composite with varying hydrogen concentrations indicate that the Ti50Zr25Cu25 alloy is significantly resistant to hydrogen embrittlement when compared to conventional amorphous alloys. A possible mechanism that would contribute toward hydrogen-induced amorphization and hydrogen embrittlement is discussed.


1991 ◽  
Vol 25 (9) ◽  
pp. 2109-2114 ◽  
Author(s):  
B. Cockeram ◽  
H.A. Lipsitt ◽  
R. Srinivasan ◽  
I. Weiss

2010 ◽  
Vol 31 (3) ◽  
pp. 1526-1532 ◽  
Author(s):  
G. Naveen Kumar ◽  
R. Narayanasamy ◽  
S. Natarajan ◽  
S.P. Kumaresh Babu ◽  
K. Sivaprasad ◽  
...  

2007 ◽  
Vol 336-338 ◽  
pp. 1406-1408 ◽  
Author(s):  
Xiao Hui Zhi ◽  
Jian Dong Xing ◽  
Yi Min Gao ◽  
Xiao Jun Wu ◽  
Xiao Le Cheng

In the present study, a Fe-Cr-C hypereutectic alloy was prepared from industry-grade materials and subjected to modification and fluctuation, through which new types of particle reinforced composites, hypereutectic in-situ composite, was generated. The structures of the composite modified or not with the range of fluctuation addition from 0% to 2.8wt.%, were investigated. The primary carbides were refined with the addition of modifying agents and fluctuations. Increasing the amount of fluctuation resulted in finer primary carbides. At 1380oC, with the addition of modifying agents and 2.8wt.% fluctuation addition, the structure was well modified.


Sign in / Sign up

Export Citation Format

Share Document