Evaluation of Permanent Deformation of BRA Modified Asphalt Paving Mixtures Based on Dynamic Creep Test Analysis

2016 ◽  
Vol 16 ◽  
pp. 69-81 ◽  
Author(s):  
Muhammad Karami ◽  
Ainalem Nega ◽  
Ahdyeh Mosadegh ◽  
Hamid Nikraz
Keyword(s):  
Creep Test ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Modified Asphalt ◽  
Nominal Size ◽  
Dynamic Creep ◽  
Asphalt Paving ◽  
Modified Binder

The main objective this study is to evaluate the permanent deformation of buton rock asphalt (BRA) modified asphalt paving mixtures using dynamic creep test so that long term deformation behavior of asphalt mixtures can be characterized. The dynamic creep test was conducted on unmodified and BRA modified asphalt mixture using UTM25 machine. Asphalt cement of C170 from a regional supplier in Western Australia was used as the base asphalt binder for unmodified asphalt mixture; and BRA modified asphalt mixtures were made by substituting the base asphalt with 10, 20, and 30% (by weight of total asphalt binder) natural binder continuing granular BRA modified binder. The granular (pellets) BRA modified binder with a diameter of 7-10 mm was produced and extracted according the Australia Standard. Crushed granite was taken from a local quarry of the region; and dense graded for both unmodified and BRA modified asphalt mixture with the nominal size of 10 mm was used. The results of this analysis showed that BRA modified had a good performance as compared with unmodified asphalt mixtures, and increase in the content modified binder to 10%, 20%, and 30% resulted in decrease of the total permanent strain.

scholarly journals Characterization of neat and modified asphalt binders and mixtures in relation to permanent deformation

2019 ◽  
Vol 26 (1) ◽  
pp. 379-387
Author(s):  
Iuri S. Bessa ◽  
Márcia M. Takahashi ◽  
Kamilla L. Vasconcelos ◽  
Liedi L. B. Bernucci
Keyword(s):  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Rutting Resistance ◽  
Modified Asphalt ◽  
Recoverable Compliance ◽  
Modified Binder ◽  
Deformation Tests

AbstractThe addition of polymers on asphalt binders aims to enhance their performance, especially at high temperatures, which correspond to rutting resistance. The Superpave rutting parameter (|G*|/sinδ) has been considered to be inadequate to characterize the performance of modified materials, therefore the Multiple Stress Creep and Recovery (MSCR) test was developed, providing the parameter non-recoverable compliance (Jnr). This research has the main objective of correlating asphalt binders performance-based characterization with rutting resistance of asphalt mixtures, and presents results obtained for one conventional (50/70 penetration grade) and two modified asphalt binders (2.1% RET and 1.9% RET) regarding their rheological characteristics. With the use of the dynamic shear rheometer (DSR), master curves and MSCR results were obtained for the three binders. In addition, permanent deformation tests were performed on the asphalt mixtures by means of laboratory traffic simulation. The rutting characterization indicated higher permanent deformation resistance for the modified binders for the asphalt binder and the asphalt mixture testing. The main conclusions were that the use of modified binder reduced in approximately 50% the Jnr values and the rut depth; also, the asphalt binders’ characteristics were able to predict the asphalt mixtures rutting resistance.

scholarly journals MECHANICAL PERFORMANCE OF ASPHALT MIXTURE CONTAINING CUP LUMP RUBBER

2019 ◽  
Vol 81 (6) ◽  
Author(s):  
Norfazira Mohd Azahar ◽  
Norhidayah Abdul Hassan ◽  
Ramadhansyah Putra Jaya ◽  
Hasanan Md. Nor ◽  
Mohd Khairul Idham Mohd Satar ◽  
...  
Keyword(s):  
Mechanical Performance ◽  
Resilient Modulus ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Modified Asphalt ◽  
Dynamic Creep ◽  
Aging Conditions ◽  
Public Work Department ◽  
Indirect Tensile

The use of cup lump rubber as an additive in asphalt binder has recently become the main interest of the paving industry. The innovation helps to increase the natural rubber consumption and stabilize the rubber price. This study evaluates the mechanical performance of cup lump rubber modified asphalt (CMA) mixture in terms of resilient modulus, dynamic creep and indirect tensile strength under aging conditions. The CMA mixture was prepared using dense-graded Marshall-designed mix and the observed behavior was compared with that of conventional mixture. From the results, both mixtures passed the volumetric properties as accordance to Malaysian Public Work Department (PWD) specification. The addition of cup lump rubber provides better resistance against permanent deformation through the enhanced properties of resilient modulus and dynamic creep. Furthermore, the resilient modulus of CMA mixture performed better under aging conditions.  

Recycled Polyethylene Modified Asphalt Binders and Mixtures: Performance Characteristics and Environmental Impact

2022 ◽  
pp. 036119812110657
Author(s):  
Ibrahim A. Abdalfattah ◽  
Walaa S. Mogawer ◽  
Kevin D. Stuart
Keyword(s):  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Dry Process ◽  
Modified Asphalt ◽  
Wet Process ◽  
Melted Snow ◽  
Recycled Polyethylene ◽  
Asphalt Paving

This study addresses the effects of recycled polyethylene (RPE) on the performances of both asphalt binders and asphalt mixtures. Whether using RPE in an asphalt mixture might leach harmful chemicals into rainwater or melted snow was also determined. Two processes, wet and dry, were used to formulate the RPE modified asphalt binders and mixtures. In the wet process, RPE was added to asphalt binder. In the dry process, it was added to heated aggregates. RPE from two sources and PG 64-22 virgin asphalt binders from two sources were used in this study. In conclusion, RPE improved the rutting resistance of the asphalt binders and asphalt mixtures. However, it had adverse effects on their resistance to intermediate-temperature and non-load associated cracking. The dry process could produce a mixture with a higher RPE dosage compared with the wet process using one virgin asphalt binder but not the other; thus, the virgin asphalt binder source was a significant factor for the dry process. Based on an embryotoxicity test, it was found that RPE can be used by the asphalt paving industry without creating any significant environmental risks.

Investigation of Creep Mechanics Properties of Layered Nano-Montmorillonite Modified Asphalt Mixtures

2011 ◽  
Vol 467-469 ◽  
pp. 1541-1545 ◽  
Author(s):  
Tian Gui Liu ◽  
Shao Peng Wu ◽  
Jun Han
Keyword(s):  
Elastic Property ◽  
Asphalt Concrete ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Testing Machine ◽  
Asphalt Mixture ◽  
Layered Silicate ◽  
Asphalt Mixtures ◽  
Modified Bitumen ◽  
Modified Asphalt

Montmorillonite（MMT）is a typical layered silicate. It has been widely used to modify polymers. It improves the thermal, mechanical and aging properties of polymers. The prominent features of MMT modified asphalt concrete are significant for prolonging the service life of asphalt pavement. The profound researches on the service performance and mechanical characteristics of MMT modified asphalt binder and mixtures are important for the application of MMT modified asphalt concrete in practice projects. The effect of MMT on the creep properties of asphalt mixture has been investigated in the research. The result showed that the physical capabilities of MMT modified bitumen was improved evidently. UTM 25 electro-hydraulic servo-universal testing machine was used to do Creep Text, and proper rheological models are employed to describe such characteristics. Results indicated that the visco-elastic properties of the mixtures can be changed by the use of MMT. The revised Burgers model is suitable for the visco-elastic property research of MMT modified asphalt mixtures. The model demonstrated that the retardant visco-elastic property and viscous property of asphalt mixtures containing MMT can be improved, which result in the enhancement of resistance to permanent deformation for MMT modified asphalt mixtures.

Determining Optimum Carbon Nanotubes Content for Asphalt Mixture in Road Pavements

2021 ◽  
Vol 1023 ◽  
pp. 121-126
Author(s):  
Van Bach Le ◽  
Van Phuc Le
Keyword(s):  
Carbon Nanotubes ◽  
Asphalt Pavement ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Construction Cost ◽  
Asphalt Mixtures ◽  
Static Modulus ◽  
Pavement Construction ◽  
Modified Binder ◽  
Marshall Stability

Although small amount of binder in asphalt concrete mixture may commonly range from 3.5 to 5.5% of total mixture as per many international specifications, it has a significant impact on the total cost of pavement construction. Therefore, this paper investigated the effects of five carbon nanotubes contents of 0.05%, 0.1%, 0.15%, 0.2%, 0.25% by asphalt weight as an additive material for binder on performance characteristics of asphalt mixtures. Performance properties of CNTs modified asphalt mixtures were investigated through the Marshall stability (MS) test, indirect tensile (IDT) test, static modulus (SM) test, wheel tracking (WT) test. The results indicated that asphalt mixtures with CNT modified binder can improve both the rutting performance, IDT strength and marshall stability of tested asphalt mixtures significantly at higher percentages of carbon nanotubes. However, the issue that should be considered is the construction cost of asphalt pavement. Based on the asphalt pavement structural analysis and construction cost, it can be concluded that an optimum CNT content of 0.1% by asphalt weight may be used as additive for asphalt binder in asphalt mixtures.

scholarly journals Assessments on the Performance of Asphalt Mixtures Prepared with Adhesion Promoters

2019 ◽  
Vol 8 (3S3) ◽  
pp. 332-339
Keyword(s):  
Mechanical Performance ◽  
Water Immersion ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Adhesion Promoters ◽  
Modified Asphalt ◽  
Service Characteristics ◽  
Bonding Properties ◽  
Mechanical Performances

Asphalt pavement is typically susceptible to moisture damage. However, it could be improved with the incorporation of additives or modifiers through binder modifications. The objective of the study is to assess the effect of adhesion promoters, namely PBL and M5000, onto the Hot Mix Asphalt (HMA). The performance of asphalt mixture has been assessed in terms of the service characteristics, the bonding properties, and mechanical performances. The service characteristics were assessed through the Workability Index (WI) and Compaction Energy Index (CEI) to evaluate the ease of asphalt mixture during the mixing and compaction stage. The bonding properties of the modified asphalt mixtures were determined using the boiling water test and static water immersion test to signify the degree of coating after undergoing specific conditioning period and temperature. The mechanical performances of the modified asphalt mixture were evaluated via Marshall stability, semi-circular bending, and modified Lottman tests. All specimens were prepared by incorporating adhesion promoters at the dosage rates of 0.5% and 1.0% by weight of asphalt binder. From the investigation, the bonding properties significantly improved for the modified asphalt mixture compared to the control mixture. The WI of the modified asphalt mixture increased while the CEI decreased in comparison to the control specimen. This implies the workability of modified asphalt mixture is better and requires less energy to be compacted. Modified asphalt mixture generally had better mechanical performance. Therefore, it can be deduced that the asphalt mixture with adhesion promoters have better overall performance than the control mixture.

Sign in / Sign up

Export Citation Format

Share Document