Determining Optimum Carbon Nanotubes Content for Asphalt Mixture in Road Pavements

2021 ◽  
Vol 1023 ◽  
pp. 121-126
Author(s):  
Van Bach Le ◽  
Van Phuc Le
Keyword(s):  
Carbon Nanotubes ◽  
Asphalt Pavement ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Construction Cost ◽  
Asphalt Mixtures ◽  
Static Modulus ◽  
Pavement Construction ◽  
Modified Binder ◽  
Marshall Stability

Although small amount of binder in asphalt concrete mixture may commonly range from 3.5 to 5.5% of total mixture as per many international specifications, it has a significant impact on the total cost of pavement construction. Therefore, this paper investigated the effects of five carbon nanotubes contents of 0.05%, 0.1%, 0.15%, 0.2%, 0.25% by asphalt weight as an additive material for binder on performance characteristics of asphalt mixtures. Performance properties of CNTs modified asphalt mixtures were investigated through the Marshall stability (MS) test, indirect tensile (IDT) test, static modulus (SM) test, wheel tracking (WT) test. The results indicated that asphalt mixtures with CNT modified binder can improve both the rutting performance, IDT strength and marshall stability of tested asphalt mixtures significantly at higher percentages of carbon nanotubes. However, the issue that should be considered is the construction cost of asphalt pavement. Based on the asphalt pavement structural analysis and construction cost, it can be concluded that an optimum CNT content of 0.1% by asphalt weight may be used as additive for asphalt binder in asphalt mixtures.

scholarly journals Investigating the Effect of Olive Husk Ash on the Properties of Asphalt Concrete Mixture

2021 ◽  
Vol 45 (1) ◽  
pp. 11-15
Author(s):  
Arabi N.S. Al Qadi ◽  
Taisir S. Khedaywi ◽  
Madhar A. Haddad ◽  
Owies A. Al-Rababa'ah
Keyword(s):  
Asphalt Concrete ◽  
Construction Material ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Concrete Mixture ◽  
Mineral Aggregate ◽  
Limestone Aggregate ◽  
Olive Husk ◽  
Pavement Construction ◽  
Marshall Stability

Technology in transportation used available resources to make it safe, fast, suitable, easy, economic, and environmental to transport people and goods. Olive Husk became an environmental problem as waste materials especially in the Middle East where huge quantities are found. The objective of this research is to investigate the effect of addition of Olive Husk Ash (OHA) on the properties of asphalt concrete mixtures. Marshall Test was used to perform the asphalt concrete mixture by the addition of OHA to the binder of asphalt; different percentages of OHA (0, 5, 10, 15, and 20%) by volume were added to the binder. Five percent of asphalt cements (5, 5.5, 6, 6.5 and 7%) by weight and limestone aggregate were used for preparing asphalt mixture specimens to find the optimum content of asphalt that could be used in the binder. Tests on flow, stability, air void percentage and void in mineral aggregate, retained stability, stiffness, and retained stiffness were made. The principle results on OHA as filler in Asphalt binder improves the Marshall Stability, and void in mineral aggregate and decrease in flow, retained stability, stiffness, and retained stiffness with a 10%-15% of olive husk ash replacement of asphalt binder. The contribution that OHA could be used as a pavement construction material in field.

Evaluation of Permanent Deformation of BRA Modified Asphalt Paving Mixtures Based on Dynamic Creep Test Analysis

2016 ◽  
Vol 16 ◽  
pp. 69-81 ◽  
Author(s):  
Muhammad Karami ◽  
Ainalem Nega ◽  
Ahdyeh Mosadegh ◽  
Hamid Nikraz
Keyword(s):  
Creep Test ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Modified Asphalt ◽  
Nominal Size ◽  
Dynamic Creep ◽  
Asphalt Paving ◽  
Modified Binder

The main objective this study is to evaluate the permanent deformation of buton rock asphalt (BRA) modified asphalt paving mixtures using dynamic creep test so that long term deformation behavior of asphalt mixtures can be characterized. The dynamic creep test was conducted on unmodified and BRA modified asphalt mixture using UTM25 machine. Asphalt cement of C170 from a regional supplier in Western Australia was used as the base asphalt binder for unmodified asphalt mixture; and BRA modified asphalt mixtures were made by substituting the base asphalt with 10, 20, and 30% (by weight of total asphalt binder) natural binder continuing granular BRA modified binder. The granular (pellets) BRA modified binder with a diameter of 7-10 mm was produced and extracted according the Australia Standard. Crushed granite was taken from a local quarry of the region; and dense graded for both unmodified and BRA modified asphalt mixture with the nominal size of 10 mm was used. The results of this analysis showed that BRA modified had a good performance as compared with unmodified asphalt mixtures, and increase in the content modified binder to 10%, 20%, and 30% resulted in decrease of the total permanent strain.

scholarly journals Influence of Polypropylene Length on Stability and Flow of Fiber-reinforced Asphalt Mixtures

2016 ◽  
Vol 2 (10) ◽  
pp. 538-545 ◽  
Author(s):  
Ramin Bayat ◽  
Siamak Talatahari
Keyword(s):  
Asphalt Concrete ◽  
Asphalt Pavement ◽  
Flexible Pavements ◽  
Asphalt Mixture ◽  
Fatigue Cracking ◽  
Asphalt Mixtures ◽  
Concrete Mixture ◽  
Fiber Reinforced ◽  
Surface Distress ◽  
Marshall Stability

Engineers are constantly trying to improve the performance of the flexible pavements. The main surface distress types which cause maintenance and disruption are rutting and fatigue cracking. For solving these problems, many studies have been carried out until now, ranged from changing gradation to adding polymers and fibers to asphalt mixture. In this study, polypropylene additive was selected as fiber additive because of low costing and having good correlation with asphalt pavement. Three type of polypropylene additive in the length 6, 12 and 19 mm were selected and used at five different percentages in the asphalt concrete mixture. Asphalt specimens were analysed by Marshall Analysis and finally tested by Marshall Stability apparatus. Adding polypropylene increased Marshall Stability (38%), and decreased Flow (39%). These results show that polypropylene can be helpful for increasing pavement life.

Relationships among Chemistry, Rheology, and Fracture/Fatigue Performance of Recovered Asphalt Binders and Asphalt Mixtures Containing Reclaimed Asphalt Pavement

2020 ◽  
Vol 2674 (10) ◽  
pp. 927-938
Author(s):  
Peyman Barghabany ◽  
Wei Cao ◽  
Louay N. Mohammad ◽  
Samuel B. Cooper ◽  
Samuel B. Cooper
Keyword(s):  
Asphalt Pavement ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Intermediate Temperature ◽  
Asphalt Binders ◽  
Rheological Parameters ◽  
Cracking Resistance ◽  
Reclaimed Asphalt ◽  
Four Point Bending

Because of limited amounts of natural resources, reclaimed asphalt pavement (RAP) has gained popularity in the asphalt pavement industry to meet sustainability requirements in asphalt pavement. Concerns have been raised in relation to the intermediate temperature cracking performance of asphalt mixtures containing RAP. The objective of this study was to evaluate the intermediate temperature cracking resistance of asphalt mixtures and recovered asphalt binders containing RAP. Seven plant-produced asphalt mixtures from three transportation agencies with various RAP contents and the extracted asphalt binders were evaluated with respect to intermediate temperature cracking resistance. Asphalt binder experiments included chemical and rheological characterization of recovered asphalt binders. Chemical characterization consisted of Fourier transform infrared spectroscopy and saturates/aromatics/resins/asphaltenes component analysis. Linear amplitude sweep and time sweep tests were also performed to characterize the rheological properties of asphalt binders. Asphalt mixture experiments included four-point bending beam fatigue and semi-circular bend tests. Results indicated that, as expected, asphalt mixtures with high RAP contents resulted in asphalt binders and mixtures with reduced cracking resistance. Relationships between the asphalt binder chemical and rheological parameters and asphalt mixture cracking resistance were also investigated. Asphalt binder rheological and chemical parameters were well correlated. Asphalt binder rheological parameters showed reasonable to strong relationships with the four-point bending beam fatigue test result. The work presented in this paper is part of FHWA Transportation Pooled Fund Project TPF-5(294) “Develop Mix Design and Analysis Procedure for Asphalt Mixtures Containing High RAP and/or RAS Contents.”

scholarly journals Characterization of neat and modified asphalt binders and mixtures in relation to permanent deformation

2019 ◽  
Vol 26 (1) ◽  
pp. 379-387
Author(s):  
Iuri S. Bessa ◽  
Márcia M. Takahashi ◽  
Kamilla L. Vasconcelos ◽  
Liedi L. B. Bernucci
Keyword(s):  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Rutting Resistance ◽  
Modified Asphalt ◽  
Recoverable Compliance ◽  
Modified Binder ◽  
Deformation Tests

AbstractThe addition of polymers on asphalt binders aims to enhance their performance, especially at high temperatures, which correspond to rutting resistance. The Superpave rutting parameter (|G*|/sinδ) has been considered to be inadequate to characterize the performance of modified materials, therefore the Multiple Stress Creep and Recovery (MSCR) test was developed, providing the parameter non-recoverable compliance (Jnr). This research has the main objective of correlating asphalt binders performance-based characterization with rutting resistance of asphalt mixtures, and presents results obtained for one conventional (50/70 penetration grade) and two modified asphalt binders (2.1% RET and 1.9% RET) regarding their rheological characteristics. With the use of the dynamic shear rheometer (DSR), master curves and MSCR results were obtained for the three binders. In addition, permanent deformation tests were performed on the asphalt mixtures by means of laboratory traffic simulation. The rutting characterization indicated higher permanent deformation resistance for the modified binders for the asphalt binder and the asphalt mixture testing. The main conclusions were that the use of modified binder reduced in approximately 50% the Jnr values and the rut depth; also, the asphalt binders’ characteristics were able to predict the asphalt mixtures rutting resistance.

scholarly journals Modified Asphalt Binder with Natural Zeolite for Warm Mix Asphalt

2015 ◽  
Vol 10 (2) ◽  
pp. 61-68 ◽  
Author(s):  
Marián Dubravský ◽  
Ján Mandula
Keyword(s):  
Natural Zeolite ◽  
Asphalt Pavement ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Warm Mix Asphalt ◽  
Asphalt Mixtures ◽  
Modified Asphalt ◽  
The Road ◽  
Basic Physic ◽  
Modified Asphalt Binder

Abstract In recent years, warm mix asphalt (WMA) is becoming more and more used in the asphalt industry. WMA provide a whole range of benefits, whether economic, environmental and ecological. Lower energy consumption and less pollution is the most advantages of this asphalt mixture. The paper deals with the addition of natural zeolite into the sub base asphalt layers, which is the essential constituent in the construction of the road. Measurement is focused on basic physic – mechanical properties declared according to the catalog data sheets. The aim of this article is to demonstrate the ability of addition the natural zeolite into the all asphalt layers of asphalt pavement. All asphalt mixtures were compared with reference asphalt mixture, which was prepared in reference temperature.

scholarly journals Cold In-Place Recycling Asphalt Mixtures: Laboratory Performance and Preliminary M-E Design Analysis

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2036
Author(s):  
Dongzhao Jin ◽  
Dongdong Ge ◽  
Siyu Chen ◽  
Tiankai Che ◽  
Hongfu Liu ◽  
...  
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Dynamic Modulus ◽  
Asphalt Pavement ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Asphalt Emulsion ◽  
Moisture Susceptibility ◽  
Low Temperature Cracking

Cold in-place recycling (CIR) asphalt mixtures are an attractive eco-friendly method for rehabilitating asphalt pavement. However, the on-site CIR asphalt mixture generally has a high air void because of the moisture content during construction, and the moisture susceptibility is vital for estimating the road service life. Therefore, the main purpose of this research is to characterize the effect of moisture on the high-temperature and low-temperature performance of a CIR asphalt mixture to predict CIR pavement distress based on a mechanistic–empirical (M-E) pavement design. Moisture conditioning was simulated by the moisture-induced stress tester (MIST). The moisture susceptibility performance of the CIR asphalt mixture (pre-mist and post-mist) was estimated by a dynamic modulus test and a disk-shaped compact tension (DCT) test. In addition, the standard solvent extraction test was used to obtain the reclaimed asphalt pavement (RAP) and CIR asphalt. Asphalt binder performance, including higher temperature and medium temperature performance, was evaluated by dynamic shear rheometer (DSR) equipment and low-temperature properties were estimated by the asphalt binder cracking device (ABCD). Then the predicted pavement distresses were estimated based on the pavement M-E design method. The experimental results revealed that (1) DCT and dynamic modulus tests are sensitive to moisture conditioning. The dynamic modulus decreased by 13% to 43% at various temperatures and frequencies, and the low-temperature cracking energy decreased by 20%. (2) RAP asphalt incorporated with asphalt emulsion decreased the high-temperature rutting resistance but improved the low-temperature anti-cracking and the fatigue life. The M-E design results showed that the RAP incorporated with asphalt emulsion reduced the international roughness index (IRI) and AC bottom-up fatigue predictions, while increasing the total rutting and AC rutting predictions. The moisture damage in the CIR pavement layer also did not significantly affect the predicted distress with low traffic volume. In summary, the implementation of CIR technology in the project improved low-temperature cracking and fatigue performance in the asphalt pavement. Meanwhile, the moisture damage of the CIR asphalt mixture accelerated high-temperature rutting and low-temperature cracking, but it may be acceptable when used for low-volume roads.

scholarly journals Laboratory comparative assessment of warm and hot mixes Asphalt containing reclaimed Asphalt pavement

2020 ◽  
Vol 8 (2) ◽  
pp. 15-26
Author(s):  
Hasan H Joni ◽  
Aqeel Y M Alkhafaji
Keyword(s):  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Warm Mix Asphalt ◽  
Asphalt Mixtures ◽  
Reclaimed Asphalt Pavement ◽  
Moisture Resistance ◽  
Recycled Asphalt ◽  
Reclaimed Asphalt ◽  
Marshall Stability ◽  
The Impact

Warm mix Asphalt (WMA) could be mixed and used in paving at low temperatures to minimize the consumption of energy and the emissions of greenhouse gas. Recycled Asphalt pavement (RAP) could save Asphaltic cement and aggregate, which could achieve the better effects of recycling. However, both of the two WMA and RAP technologies have some deficiencies. Warm mix Asphalt and Reclaimed Asphalt pavement (WMA-RAP) technique may solve these issues and deficiencies when they are utilized together. This study investigated the implementations of WMA-RAP and its impacts on the performance of the Asphalt mixture. Under the framework of this study, four percentages of RAP (0%, 20%, 30%, and 40%) were added to the hot mix Asphalt (HMA) and WMA containing 4% Sasobit to study the impact of increasing RAP content on Marshall stability and moisture resistance of Asphalt mixtures. In summary, the Marshall stability of HMA and WMA mixtures is higher than the control mixtures. A small decrease in moisture resistance of both (HMA and WMA) containing RAP comparing to control mixtures Asphalt was observed, as shown by reduced the tensile strength ratios (TSR), but it is still much higher than the minimum of 80%.

scholarly journals A Review of Nanomaterials’ Effect on Mechanical Performance and Aging of Asphalt Mixtures

2019 ◽  
Vol 9 (18) ◽  
pp. 3657 ◽  
Author(s):  
João Crucho ◽  
Luís Picado-Santos ◽  
José Neves ◽  
Silvino Capitão
Keyword(s):  
High Performance ◽  
Mechanical Performance ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Economic Feasibility ◽  
Asphalt Binders ◽  
Aging Resistance ◽  
Marshall Stability

This review addresses the effects of the modifications with nanomaterials, particularly nanosilica, nanoclays, and nanoiron, on the mechanical performance and aging resistance of asphalt mixtures. The desire for high-performance and long-lasting asphalt pavements significantly pushed the modification of the conventional paving asphalt binders. To cope with such demand, the use of nanomaterials for the asphalt binder modification seems promising, as with a small amount of modification an important enhancement of the asphalt mixture mechanical performance can be attained. Several studies already evaluated the effects of the modifications with nanomaterials, mostly focusing on the asphalt binder properties and rheology, and the positive findings encouraged the study of modified asphalt mixtures. This review focuses on the effects attained in the mechanical properties of the asphalt mixtures, under fresh and aged conditions. Generally, the effects of each nanomaterial were evaluated with the current state-of-art tests for the characterization of mechanical performance of asphalt mixtures, such as, permanent deformation, stiffness modulus, fatigue resistance, indirect tensile strength, and Marshall stability. Aging indicators, as the aging sensitivity, were used to evaluate the effects in the asphalt mixture’s aging resistance. Finally, to present a better insight into the economic feasibility of the analyzed nanomaterials, a simple cost analysis is performed.

scholarly journals A Study on the Application of Rock Asphalt from Sichuan China Based on Anti-Rutting Performance

2019 ◽  
Vol 9 (5) ◽  
pp. 870 ◽  
Author(s):  
Limin Li ◽  
Zhaoyi He ◽  
Weidong Liu ◽  
Cheng Hu
Keyword(s):  
Low Temperature ◽  
Asphalt Pavement ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Strength Ratio ◽  
Modified Asphalt ◽  
Freeze Thaw ◽  
Splitting Strength ◽  
Tensile Fatigue

To solve the early rutting failure of asphalt pavement, the application of rock asphalt from Sichuan, China, based on anti-rutting performance, was studied. Preparations of North Sichuan rock asphalt (NS RA) and NS RA-modified asphalt mixture were elaborated in detail. Using Zhonghai AH-70 asphalt, Esso AH-70 asphalt, North American rock asphalt (NA RA) and NS RA, the performances of NS RA modified asphalt were researched based on index tests, Brookfield rotary viscosity test and bending beam rheometer test. A performance verification of NS RA-modified asphalt was carried out using rutting calculation, the rutting, indirect tensile fatigue, freeze–thaw split and small beam bending tests based on five kinds of selected gradations. The results indicated that in comparison with NA RA, the NS RA has a good modification effect as well. The NS RA can obviously improve the anti-rutting ability of the asphalt binder, and it can enhance its anti-aging performance as well. For the NS RA-modified asphalt mixture, it is feasible to determine the optimum NS RA content, based on its anti-rutting performance, and its optimum NS RA content is about 8%. The dynamic stability values of NS RA-modified asphalt mixtures are at least 3-fold higher than those of the base asphalt mixtures, and they are all far greater than the summer hot area requirement (no less than 2800 times/mm). NS RA-modified asphalt mixtures used in the middle course of asphalt pavement can obviously improve the anti-rutting performance of the pavement, and to enhance the anti-rutting ability of pavements, it should be used in the middle course of the pavement. The fatigue life values of NS RA-modified asphalt mixtures are at least 14.5-fold higher than those of the base asphalt mixtures. The freeze–thaw splitting strength ratio values of NS RA-modified asphalt mixtures are improved by at least 9.5% over the base asphalt mixtures, and their freeze–thaw splitting strength ratio values are all greater than the requirement (no less than 75%). In comparison with the base asphalt, the low temperature performances of NS RA-modified asphalt and its mixtures slightly decline, but they can meet the requirements for the zones with a minimum temperature of no less than –21.5 °C too. Therefore, except for the extremely low temperature area, it is an effective method for solving the rutting problem of pavement for using NS RA-modified asphalt.

Sign in / Sign up

Export Citation Format

Share Document