External Fire Spread Analysis

2017 ◽  
Vol 21 ◽  
pp. 33-36
Author(s):  
Ruxandra Dârmon ◽  
Mircea Suciu

The fire safety regulations in Romania require that in case of a fire occurring into a building, it should be prevented to spread to any adjacent structure or neighbouring façade. Apart from the minimum prescribed distances between the buildings, there is no other benchmark or guidance for an approved calculation method to prove compliance with this provision. The British regulations have specified that the heat fluxes on the surfaces exposed to radiation from a fire within the adjacent buildings should not exceed a heat flux of 12.6 kW/m2. The purpose of this article is to review some of the empirical calculation methods for the incident radion flux given in the international literature and to compare their results for a practical aplication.

2021 ◽  
Vol 11 (5) ◽  
pp. 2380
Author(s):  
Mohamed Beshir ◽  
Karim Omar ◽  
Felipe Roman Centeno ◽  
Samuel Stevens ◽  
Lesley Gibson ◽  
...  

According to recent UN reports, it is estimated that more than one billion people live in informal settlements globally, exposing them to a large potential fire risk. In previous research, it was found that the main fire spread mechanism between dwellings is the external flaming (plume) and radiative heat fluxes from the vertical openings at the dwelling of origin to the surroundings. In this paper, an experimental and numerical study was conducted to quantify the effect of adding horizontal roof openings to the design of informal settlement dwellings to reduce the fire spread risk by decreasing the length of flames and radiation from the external plumes at the vertical openings. In total, 19 quarter scale ISO-9705 compartment fire experiments were conducted using an identical fuel load (80 MJ/m2) of polypropylene and were used to validate a physical computational fluid dynamics model for future studies. Five different total horizontal openings areas (0.0025, 0.01, 0.04, 0.09, and 0.16 m2) were investigated using two horizontal openings designs: (1) four square openings at the four corners of the compartment and (2) one slot cut at the middle of the compartment. It was found that adding horizontal openings decreased the average heat flux measured at the door by up to 65% and 69% for corner and slot cases, respectively. Heat flux reductions were achieved at opening areas as low as 0.01 m2 for slot cases, whereas reductions were only achieved at areas of at least 0.09 m2 for corner cases. The Computational Fluid Dynamics (CFD) model was validated using the experimental results. It successfully captured the main fire dynamics within the compartment in addition to the values of the external radiative heat flux. Further, a new empirical ventilation factor was generated to describe the flow field through both openings configurations which showed strong coupling with the inlet mass of fresh air to the compartment.


2000 ◽  
Vol 18 (5) ◽  
pp. 354-375
Author(s):  
VINCENT BRANNIGAN ◽  
ANTHONY KILPATRICK

Fluids ◽  
2021 ◽  
Vol 6 (7) ◽  
pp. 246
Author(s):  
Rozie Zangeneh

The Wall-modeled Large-eddy Simulation (WMLES) methods are commonly accompanied with an underprediction of the skin friction and a deviation of the velocity profile. The widely-used Improved Delayed Detached Eddy Simulation (IDDES) method is suggested to improve the prediction of the mean skin friction when it acts as WMLES, as claimed by the original authors. However, the model tested only on flow configurations with no heat transfer. This study takes a systematic approach to assess the performance of the IDDES model for separated flows with heat transfer. Separated flows on an isothermal wall and walls with mild and intense heat fluxes are considered. For the case of the wall with heat flux, the skin friction and Stanton number are underpredicted by the IDDES model however, the underprediction is less significant for the isothermal wall case. The simulations of the cases with intense wall heat transfer reveal an interesting dependence on the heat flux level supplied; as the heat flux increases, the IDDES model declines to predict the accurate skin friction.


2021 ◽  
Author(s):  
Yu Wang ◽  
Lesley Gibson ◽  
Mohamed Beshir ◽  
David Rush

AbstractApproximately one billion people across the globe are living in informal settlements with a large potential fire risk. Due to the high dwelling density, a single informal settlement dwelling fire may result in a very serious fire disaster leaving thousands of people homeless. In this work, a simple physics-based theoretical model was employed to assess the critical fire separation distance between dwellings. The heat flux and ejected flame length were obtained from a full-scale dwelling tests with ISO 9705 dimension (3.6 m × 2.4 m × 2.4 m) to estimate the radiation decay coefficient of the radiation heat flux away from the open door. The ignition potential of combustible materials in adjacent dwellings are analyzed based on the critical heat flux from cone calorimeter tests. To verify the critical distance in real informal settlement fire, a parallel method using aerial photography within geographic information systems (GIS), was employed to determine the critical separation distances in four real informal settlement fires of 2014–2015 in Masiphumelele, Cape Town, South Africa. The fire-spread distances were obtained as well through the real fires. The probabilistic analysis was conducted by Weibull distribution and logistic regression, and the corresponding separation distances were given with different fire spread probabilities. From the experiments with the assumption of no interventions and open doors and windows, it was established that the heat flux would decay from around 36 kW/m2 within a distance of 1.0 m to a value smaller than 5 kW/m2 at a distance of 4.0 m. Both experiments and GIS results agree well and suggest the ignition probabilities at distances of 1.0 m, 2.0 m and 3.0 m are 97%, 52% and 5% respectively. While wind is not explicitly considered in the work, it is implicit within the GIS analyses of fire spread risk, therefore, it is reasonable to say that there is a relatively low fire spread risk at distances greater than 3 m. The distance of 1.0 m in GIS is verified to well and conservatively predict the fire spread risk in the informal settlements.


2021 ◽  
Vol 87 (2) ◽  
Author(s):  
Elizabeth A. Tolman ◽  
Peter J. Catto

Upcoming tokamak experiments fuelled with deuterium and tritium are expected to have large alpha particle populations. Such experiments motivate new attention to the theory of alpha particle confinement and transport. A key topic is the interaction of alpha particles with perturbations to the tokamak fields, including those from ripple and magnetohydrodynamic modes like Alfvén eigenmodes. These perturbations can transport alphas, leading to changed localization of alpha heating, loss of alpha power and damage to device walls. Alpha interaction with these perturbations is often studied with single-particle theory. In contrast, we derive a drift kinetic theory to calculate the alpha heat flux resulting from arbitrary perturbation frequency and periodicity (provided these can be studied drift kinetically). Novel features of the theory include the retention of a large effective collision frequency resulting from the resonant alpha collisional boundary layer, correlated interactions over many poloidal transits and finite orbit effects. Heat fluxes are considered for the example cases of ripple and the toroidal Alfvén eigenmode (TAE). The ripple heat flux is small. The TAE heat flux is significant and scales with the square of the perturbation amplitude, allowing the derivation of constraints on mode amplitude for avoidance of significant alpha depletion. A simple saturation condition suggests that TAEs in one upcoming experiment will not cause significant alpha transport via the mechanisms in this theory. However, saturation above the level suggested by the simple condition, but within numerical and experimental experience, which could be accompanied by the onset of stochasticity, could cause significant transport.


Buildings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 51
Author(s):  
Amaya Osácar ◽  
Juan Bautista Echeverria Trueba ◽  
Brian Meacham

There is a trend in Europe towards increasing the quality and performance of regulations. At the same time, regulatory failure has been observed in the area of building fire safety regulation in England and elsewhere. As a result, an analysis of the appropriateness of fire safety regulations in Spain is warranted, with the objective being to assess whether a suitable level of fire safety is currently being delivered. Three basic elements must be considered in such analysis: the legal and regulatory framework, the level of fire risk/safety of buildings that is expected and the level which actually results, and a suitable method of analysis. The focus of this paper is creating a legal and regulatory framework, in particular with respect to fire safety in buildings. Components of an ”ideal” building regulatory framework to adequately control fire risk are presented, the existing building regulatory framework is summarized, and an analysis of the gaps between the ideal and the existing systems is presented. It is concluded that the gaps between the ideal and the existing framework are significant, and that the current fire safety regulations are not appropriate for assuring delivery of the intended level of fire risk mitigation.


2021 ◽  
Vol 13 (11) ◽  
pp. 2188
Author(s):  
Salvatore Marullo ◽  
Jaime Pitarch ◽  
Marco Bellacicco ◽  
Alcide Giorgio di Sarra ◽  
Daniela Meloni ◽  
...  

Air–sea heat fluxes are essential climate variables, required for understanding air–sea interactions, local, regional and global climate, the hydrological cycle and atmospheric and oceanic circulation. In situ measurements of fluxes over the ocean are sparse and model reanalysis and satellite data can provide estimates at different scales. The accuracy of such estimates is therefore essential to obtain a reliable description of the occurring phenomena and changes. In this work, air–sea radiative fluxes derived from the SEVIRI sensor onboard the MSG satellite and from ERA5 reanalysis have been compared to direct high quality measurements performed over a complete annual cycle at the ENEA oceanographic observatory, near the island of Lampedusa in the Central Mediterranean Sea. Our analysis reveals that satellite derived products overestimate in situ direct observations of the downwelling short-wave (bias of 6.1 W/m2) and longwave (bias of 6.6 W/m2) irradiances. ERA5 reanalysis data show a negligible positive bias (+1.0 W/m2) for the shortwave irradiance and a large negative bias (−17 W/m2) for the longwave irradiance with respect to in situ observations. ERA5 meteorological variables, which are needed to calculate the air–sea heat flux using bulk formulae, have been compared with in situ measurements made at the oceanographic observatory. The two meteorological datasets show a very good agreement, with some underestimate of the wind speed by ERA5 for high wind conditions. We investigated the impact of different determinations of heat fluxes on the near surface sea temperature (1 m depth), as determined by calculations with a one-dimensional numerical model, the General Ocean Turbulence Model (GOTM). The sensitivity of the model to the different forcing was measured in terms of differences with respect to in situ temperature measurements made during the period under investigation. All simulations reproduced the true seasonal cycle and all high frequency variabilities. The best results on the overall seasonal cycle were obtained when using meteorological variables in the bulk formulae formulations used by the model itself. The derived overall annual net heat flux values were between +1.6 and 40.4 W/m2, depending on the used dataset. The large variability obtained with different datasets suggests that current determinations of the heat flux components and, in particular, of the longwave irradiance, need to be improved. The ENEA oceanographic observatory provides a complete, long-term, high resolution time series of high quality in situ observations. In the future, more similar sites worldwide will be needed for model and satellite validations and to improve the determination of the air–sea exchange and the understanding of related processes.


Sign in / Sign up

Export Citation Format

Share Document