Numerical Study of Low Gravity Effect on the Pressure-Sinkage Characteristics of Soft Soil

2011 ◽  
Vol 101-102 ◽  
pp. 488-491
Author(s):  
Gui Fen Zhou ◽  
Guang Ming Chen ◽  
Rui Zhang ◽  
Shu Cai Xu ◽  
Jian Qiao Li
Keyword(s):  
Laboratory Testing ◽  
Optimization Design ◽  
Numerical Study ◽  
Soft Soil ◽  
Three Dimensional ◽  
Low Gravity ◽  
Earth Gravity ◽  
The Earth ◽  
Gravity Changes ◽  
Testing Data

The adhesion and the compressibility of the soft soil will vary as the earth gravity changes. In this study, the pressure-sinkage characteristics in low gravity conditions were investigated by three-dimensional Discrete Element Method (DEM). The data of the DEM parameters were obtained by analyzing the pressure-sinkage relationship embedded in laboratory testing data. The pressure-sinkage experiments of the sample soil in different gravities were simulated by using the software PFC3D. Using the Bekker formula, the values of pressure-sinkage parameters were obtained. The results show that, when the earth gravity changes from one sixth of the standard earth gravity to the standard earth gravity, the sinkage exponent increases lineally. The cohesive module of deformation increases along the conic trend. The low gravities have a sensitive affect on the data of the frictional module of deformation, and the data distribute beside a line. The change laws of the pressure-sinkage parameters provide instructions for the optimization design of vehicles working in low gravity field planet.

Numerical Study on 3D Coupled Heat Transfer of Thrust Chamber with Regenerative Cooling

2011 ◽  
Vol 52-54 ◽  
pp. 1057-1061
Author(s):  
Tao Nie ◽  
Wei Qiang Liu
Keyword(s):  
Heat Transfer ◽  
Optimization Design ◽  
Numerical Study ◽  
Computing Time ◽  
Three Dimensional ◽  
Geometrical Model ◽  
Performance Estimation ◽  
Transfer Model ◽  
Empirical Formulas ◽  
Coupled Heat Transfer

To obtain temperature distribution in regenerative-cooled liquid propellant rocket nozzle quickly and accurately, three-dimensional numerical simulation employed using empirical formulas. A reduced one-dimensional model is employed for the coolant flow and heat transfer, while three dimensional heat transfer model is used to calculate the coupling heat transfer through the wall. The geometrical model is subscale hot-firing chamber. The numerical results agree well with experimental data, while temperature field in nozzle obtained. In terms of computing time and accuracy of results, this method can provide a reference for optimization design and performance estimation.

EXPERIMENTAL AND NUMERICAL STUDY OF THREE-DIMENSIONAL NATURAL CONVECTION AND FREEZING IN WATER

1994 ◽  
Author(s):  
C. Abegg ◽  
Graham de Vahl Davis ◽  
W.J. Hiller ◽  
St. Koch ◽  
Tomasz A. Kowalewski ◽  
...  
Keyword(s):  
Natural Convection ◽  
Numerical Study ◽  
Three Dimensional

Boundary element method in numerical study of three-dimensional Stokes flows in channels of arbitrary shape

2012 ◽  
Vol 9 (1) ◽  
pp. 94-97
Author(s):  
Yu.A. Itkulova
Keyword(s):  
Boundary Element Method ◽  
Boundary Element ◽  
Cross Section ◽  
Numerical Study ◽  
Three Dimensional ◽  
Cylindrical Tube ◽  
Variable Cross Section ◽  
Variable Cross ◽  
Periodic Flows ◽  
Element Method

In the present work creeping three-dimensional flows of a viscous liquid in a cylindrical tube and a channel of variable cross-section are studied. A qualitative triangulation of the surface of a cylindrical tube, a smoothed and experimental channel of a variable cross section is constructed. The problem is solved numerically using boundary element method in several modifications for a periodic and non-periodic flows. The obtained numerical results are compared with the analytical solution for the Poiseuille flow.

scholarly journals A Numerical Study of Sub-Millisecond Integrated Mix-and-Inject Microfluidic Devices for Sample Delivery at Synchrotron and XFELs

2021 ◽  
Vol 11 (8) ◽  
pp. 3404
Author(s):  
Majid Hejazian ◽  
Eugeniu Balaur ◽  
Brian Abbey
Keyword(s):  
Molecular Dynamics ◽  
Flow Rate ◽  
Numerical Study ◽  
Three Dimensional ◽  
Microfluidic Devices ◽  
Liquid Jets ◽  
Mixing Efficiency ◽  
X Ray Diffraction ◽  
Cross Sectional ◽  
Time Required

Microfluidic devices which integrate both rapid mixing and liquid jetting for sample delivery are an emerging solution for studying molecular dynamics via X-ray diffraction. Here we use finite element modelling to investigate the efficiency and time-resolution achievable using microfluidic mixers within the parameter range required for producing stable liquid jets. Three-dimensional simulations, validated by experimental data, are used to determine the velocity and concentration distribution within these devices. The results show that by adopting a serpentine geometry, it is possible to induce chaotic mixing, which effectively reduces the time required to achieve a homogeneous mixture for sample delivery. Further, we investigate the effect of flow rate and the mixer microchannel size on the mixing efficiency and minimum time required for complete mixing of the two solutions whilst maintaining a stable jet. In general, we find that the smaller the cross-sectional area of the mixer microchannel, the shorter the time needed to achieve homogeneous mixing for a given flow rate. The results of these simulations will form the basis for optimised designs enabling the study of molecular dynamics occurring on millisecond timescales using integrated mix-and-inject microfluidic devices.

scholarly journals Full-chain modeling and performance analysis of integral imaging three-dimensional display system

2020 ◽  
Vol 16 (1) ◽  
Author(s):  
Ying Yuan ◽  
Xiaorui Wang ◽  
Yang Yang ◽  
Hang Yuan ◽  
Chao Zhang ◽  
...  
Keyword(s):  
Optimization Design ◽  
Quality Evaluation ◽  
Light Field ◽  
Three Dimensional ◽  
Display System ◽  
3D Display ◽  
Performance Characterization ◽  
Integral Imaging ◽  
Characterization Model ◽  
Display Quality

Abstract The full-chain system performance characterization is very important for the optimization design of an integral imaging three-dimensional (3D) display system. In this paper, the acquisition and display processes of 3D scene will be treated as a complete light field information transmission process. The full-chain performance characterization model of an integral imaging 3D display system is established, which uses the 3D voxel, the image depth, and the field of view of the reconstructed images as the 3D display quality evaluation indicators. Unlike most of the previous research results using the ideal integral imaging model, the proposed full-chain performance characterization model considering the diffraction effect and optical aberration of the microlens array, the sampling effect of the detector, 3D image data scaling, and the human visual system, can accurately describe the actual 3D light field transmission and convergence characteristics. The relationships between key parameters of an integral imaging 3D display system and the 3D display quality evaluation indicators are analyzed and discussed by the simulation experiment. The results will be helpful for the optimization design of a high-quality integral imaging 3D display system.

Sign in / Sign up

Export Citation Format

Share Document