Effect of Iron (III)-Doping on the Photocatalytic Activity of Titanium Dioxide Catalysts for Methylene Blue Degradation

2011 ◽  
Vol 117-119 ◽  
pp. 1088-1091
Author(s):  
Wen Churng Lin ◽  
Rui Liu ◽  
Wein Duo Yang
Keyword(s):  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Specific Surface ◽  
Effective Means ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Surface Areas ◽  
Bet Specific Surface Area ◽  
Vis Spectroscopy

Iron-doped TiO2 photocatalyst powders were prepared by the sol–gel method and characterized by Brunauer–Emmett–Teller (BET)-specific surface area, scanning electron microscopy (SEM), X-ray diffraction (XRD), and Ultraviolet–Visible (UV-Vis) spectroscopy. Fe3+ doping in the TiO2 decreases the crystal grain size, increases the specific surface areas of powders, extends the absorption to visible light regions (400~500 nm), and lowers the photocatalytic activity for methylene blue (MB) degradation under UV irradiation. The photocatalytic degradation of MB in water was investigated as a function of the Fe3+ content in TiO2. It was found that under the irradiation of visible light, a small amount of Fe3+ dopant in TiO22 powders could obviously enhance the photocatalytic activity. When the Fe3+ content was in the range of 0.03–0.1 mol%, the photocatalytic activity of the samples was higher than that of undoped TiO2. Appropriate content of Fe-doping is an effective means to improve the photocatalytic activity of TiO2 for MB degradation under visible light irradiation.

Synthesis, Characterization and Photocatalytic Activity of Copper (II)-Doped Titanium Dioxide Powders

2011 ◽  
Vol 391-392 ◽  
pp. 728-731 ◽  
Author(s):  
Wen Churng Lin ◽  
Wein Duo Yang
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Specific Surface ◽  
Photoelectron Spectroscopy ◽  
Effective Means ◽  
Sol Gel ◽  
Particle Growth ◽  
X Ray ◽  
Surface Areas ◽  
Vis Spectroscopy

Different concentration of copper (II) doped TiO2 photocatalyst powders were synthesized through the sol-gel method and characterized by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET)-specific surface area, transmission electron microscopy (TEM), and Ultraviolet–Visible (UV-Vis) spectroscopy. Cu2+-doping in the TiO2 promotes the particle growth, decreases the specific surface areas of powders, extends the absorption to visible light regions, and exhibits the vis-photocatalytic activity for methylene blue (MB) degradation. Appropriate content of Cu2+-doping is an effective means to improve the photocatalytic activity of TiO2 for MB degradation under visible light irradiation.

Preparation and Photocatalytic Activity of N-TiO2/Sepiolite Nanocomposite

2011 ◽  
Vol 694 ◽  
pp. 85-90
Author(s):  
Dai Mei Chen ◽  
Hai Peng Ji ◽  
Jian Xin Wang ◽  
Jian Chen ◽  
Zheng Ming Wu ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Methylene Blue Degradation ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Photocatalytic Reactions ◽  
Nitrogen Contents

To utilize visible light and separate of TiO2 nanoparticles more efficiently in photocatalytic reactions, nitrogen doped TiO2/sepiolite composites (N-TiO2/sep) with different nitrogen contents were prepared by a sol-gel method and characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and UV-vis spectroscopy. XRD showed that anatase-TiO2 nanoparticles were loaded on the surface of sepiolite. XPS revealed that N atoms could incorporate into the lattice of anatase TiO2 substituting the sites of oxygen atoms. UV-vis spectroscopy showed that the visible light absorption of N-TiO2/sep samples decreased with the increase of calciantion temperature and increased with the increase of N content. The photocatalytic activities of obtained N-TiO2/sep samples were evaluated by methylene blue degradation under visible light irradiation. It was found that the N-TiO2/sep samples had the higher photocatalytic activity than that of TiO2/sep.

Visible-Light-Induced Photocatalytic Activity of Boron-Doped BiVO4

2014 ◽  
Vol 809-810 ◽  
pp. 890-894
Author(s):  
Dan Li ◽  
Lian Wei Shan ◽  
Gui Lin Wang ◽  
Li Min Dong ◽  
Wei Li ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectroscopy ◽  
Sol Gel ◽  
Reflectance Spectroscopy ◽  
Scheelite Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Boron Doped

Boron-BiVO4 samples were synthesized by sol-gel method. They were characterized by UV-vis diffuse reflectance spectroscopy, X-ray diffraction. Photocatalytic activity of the obtained BiVO4 samples was investigated through degrading methylene blue (MB). The results reveal that boron-BiVO4 catalysts have monoclinic scheelite structure. The BiVO4 and Co-BiVO4 photocatalysts were responsive to visible light. Co-BiVO4 photocatalyst showed higher photocatalytic activity than pure BiVO4, resulting in the significantly improved efficiency of degradation of MB.

Photocatalytic Activity of CuO/ZnO Heterostructure Nanocrystals under UV-Visible Light Irradiation

2014 ◽  
Vol 787 ◽  
pp. 35-40 ◽  
Author(s):  
Xiao Yan Zhou ◽  
Peng Wei Zhou ◽  
Hao Guo ◽  
Bo Yang ◽  
Ru Fei Ren
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Visible Light Irradiation ◽  
Cuo Nanoparticles ◽  
Light Irradiation ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Uv Visible

The p-n junction photocatalysts, p-CuO (at. 0-25%)/n-ZnO nanocomposite were prepared through hydrothermal method without using any organic solvent or surfactant. The as-prepared samples were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive X-Ray spectroscopy, and UV-vis spectroscopy. The results demonstrated that the CuO/ZnO nanocomposite presented a two-dimensional morphology composed of sheet-like ZnO nanostructures adorned with CuO nanoparticles. The photocatalytic activity of CuO/ZnO with different Cu/Zn molar rations and pure ZnO synthesized by the identical synthetic route were evaluated by degrading methylene blue (MB) dye under UV-visible light irradiation. The CuO/ZnO with Cu/Zn molar ratio of 4% exhibits the highest photocatalytic activity compared that of the other photocatalysts under the identical conditions. It is mainly attributed to the increased charge separation rate in the nanocomposite and the extended photo-responding range.

scholarly journals Visible-enhanced photocatalytic performance of CuWO4/WO3 hetero-structures: incorporation of plasmonic Ag nanostructures

2018 ◽  
Vol 42 (13) ◽  
pp. 11109-11116 ◽  
Author(s):  
R. Salimi ◽  
A. A. Sabbagh Alvani ◽  
N. Naseri ◽  
S. F. Du ◽  
D. Poelman
Keyword(s):  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Visible Light Irradiation ◽  
Photocatalytic Performance ◽  
Sol Gel ◽  
Light Irradiation ◽  
Photo Degradation ◽  
Gel Method ◽  
Sol Gel Method

A new plasmonic Ag hybridized CuWO4/WO3 heterostructured nanocomposite was successfully synthesized via a ligand-assisted sol gel method and the photocatalytic activity was evaluated by photo-degradation of methylene blue (MB) under visible light irradiation.

Photocatalytic Efficiency for Dye Decolorization of the UV/TiO2, UV/TiO2 + In2O3 and UV/TiO2-In2O3 Systems

2013 ◽  
Vol 831 ◽  
pp. 263-266
Author(s):  
Chung Hsin Wu ◽  
Chao Yin Kuo ◽  
Chih Hao Lai ◽  
Wei Yang Chung
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Sol Gel ◽  
Dye Decolorization ◽  
X Ray Diffraction ◽  
First Order ◽  
First Order Kinetics ◽  
Vis Spectroscopy ◽  
Reactive Red 2

This study explored the decolorization of C.I. Reactive Red 2 (RR2) by the ultraviolet (UV)/TiO2, UV/TiO2 + In2O3, and UV/TiO2-In2O3 systems. The TiO2-In2O3 was generated by the sol-gel method and TiO2 + In2O3 was created by mixing TiO2 and In2O3 powders. The surface properties of TiO2, In2O3, and TiO2-In2O3 were analyzed by X-ray diffraction, a specific surface area analyzer, UV-vis spectroscopy, and scanning electron microscopy. The specific surface area of TiO2, In2O3, and TiO2-In2O3 was 29.5, 44.6, and 35.7 m2/g, respectively; additionally, the band gap of TiO2, In2O3, and TiO2-In2O3 was 2.95, 2.64, and 2.91 eV; respectively. The decolorization rate constant fit pseudo-first-order kinetics and that of the UV/TiO2, UV/TiO2 + In2O3, and UV/TiO2-In2O3 systems was 0.0023, 0.0031, and 0.0072 min-1; respectively.

scholarly journals Photocatalytic Performance of SiO2/CNOs/TiO2 to Accelerate the Degradation of Rhodamine B under Visible Light

Nanomaterials ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 1671 ◽  
Author(s):  
Weike Zhang ◽  
Yanrong Zhang ◽  
Kai Yang ◽  
Yanqing Yang ◽  
Jia Jia ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Rhodamine B ◽  
Photoelectron Spectroscopy ◽  
Degradation Rate ◽  
Photocatalytic Performance ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Electronic Microscope

A silicon dioxide/carbon nano onions/titanium dioxide (SiO2/CNOs/TiO2) composite was synthesized by a simple sol-gel method and characterized by the methods of X-ray diffraction (XRD), scanning electronic microscope (SEM), X-ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET), Fourier transform infrared (FTIR), thermogravimetric analysis (TG), differential scanning calorimeter (DSC) and UV-Vis diffuse reflectance spectra (UV-Vis DRS). In this work, the photocatalytic activity of the SiO2/CNOs/TiO2 photocatalyst was assessed by testing the degradation rate of Rhodamine B (RhB) under visible light. The results indicated that the samples exhibited the best photocatalytic activity when the composite consisted of 3% CNOs and the optimum dosage of SiO2/CNOs/TiO2(3%) was 1.5 g/L as evidenced by the highest RhB degradation rate (96%). The SiO2/CNOs/TiO2 composite greatly improved the quantum efficiency of TiO2. This work provides a new option for the modification of subsequent nanocomposite oxide nanoparticles.

Effects of Synthesis Conditions on the Crystalline Phases and Photocatalytic Activities of Silver Vanadates via Hydrothermal Method

2009 ◽  
Vol 1171 ◽  
Author(s):  
Chao-Ming Huang ◽  
Guan T. Pan ◽  
Lung C. Chen ◽  
C.K. Thomas Yang ◽  
Wen S. Chang
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Surface Area ◽  
Synthesis Method ◽  
Stoichiometric Ratio ◽  
X Ray Diffraction ◽  
Hydrothermal Conditions ◽  
Synthesis Conditions ◽  
Vis Spectroscopy ◽  
Visible Light Driven

AbstractVisible-light-driven Ag3VO4 photocatalysts were successfully synthesized using low-temperature hydrothermal synthesis method. Under various hydrothermal conditions, the structures of silver vanadates were tuned by manipulating the hydrothermal time and the ratio of silver to vanadium. X-ray diffraction (XRD) results reveal that the powders prepared in a stoichiometric ratio consisted of pure α-Ag3VO4 or mixed phases of Ag4V2O7 and α-Ag3VO4. With increasing the Ag-to-V mole ratio to 6:1, the resulting samples were identified as pure monoclinic structure α-Ag3VO4. UV-vis spectroscopy indicated that silver vanadate particles had strong visible light absorption with associated band gaps in the range of 2.2-2.5 eV. The sample synthesized in the excess silver exhibited higher photocatalytic activity than that synthesized in a stoichiometric ratio. The powder synthesized at silver-rich at 140℃ for 4 h (SHT4) exhibited the highest photocatalytic activity among all samples. The reactivity of SHT4 (surface area, 3.52 m2 g-1) on the decomposition of gaseous benzene was about 16 times higher than that of P25 (surface area, 49.04 m2 g-1) under visible light irradiation. A well developed crystallinity of Ag3VO4 of SHT 4 was considered to enhance the photocatalytic efficiency.

Synthesis, Characterization and Photocatalytic Activity of Nb-Doped TiO2 Nanoparticles

2012 ◽  
Vol 455-456 ◽  
pp. 110-114 ◽  
Author(s):  
Xuan Dong Li ◽  
Xi Jiang Han ◽  
Wen Ying Wang ◽  
Xiao Hong Liu ◽  
Yan Wang ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Photocatalytic Activity ◽  
Methyl Orange ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Doped Tio2 ◽  
X Ray ◽  
Vis Spectroscopy

Nb-doped TiO2 powders with different concentrations of Nb have been synthesized by a sol-gel method and characterized by a series of technologies including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and UV-vis spectroscopy. The photocatalytic activity of Nb-doped TiO2 is evaluated by degradation efficiency of methyl orange in aqueous solution. The results indicate that the photocatalytic activity of Nb-doped TiO2 synthesized with a Nb/Ti molar ratio of 5% is higher than that of TiO2 under the visible light.

Investigation of ZnO/CuO/Nanographene Platelets Composites Catalyst for the Degradation of Methylene Blue from Aqueous Solution

2016 ◽  
Vol 864 ◽  
pp. 117-122 ◽  
Author(s):  
Hesni Shabrany ◽  
Hendry Tju ◽  
Ardiansyah Taufik ◽  
Rosari Saleh
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Catalytic Activity ◽  
Visible Light ◽  
Sol Gel ◽  
Nitrogen Adsorption ◽  
Ultrasound Irradiation ◽  
X Ray Diffraction ◽  
X Ray

This paper discusses the catalytic activity of ZnO/CuO/nanographene platelets composites under visible light and ultrasound irradiation separately. The ZnO/CuO/nanographene platelets composites were synthesized using a sol-gel method. X-ray diffraction and nitrogen adsorption spectroscopy were employed to investigate the structural and surface area of the catalyst. The catalytic activity results showed that the presence of nanographene platelets in ZnO/CuO nanocomposites improved its efficiency in degrading methylene blue. A scavenger method was also used to understand the role of charged carriers and the active radical involved in the catalytic activity.

Sign in / Sign up

Export Citation Format

Share Document