Optimization Design of Excitation Strategy on Vibrating Wire Sensor

2011 ◽  
Vol 128-129 ◽  
pp. 1186-1190 ◽  
Author(s):  
Hu He ◽  
Jian Hui Sun ◽  
Dong Cheng Tian ◽  
Na Li

There are two ways of excitation on steel-string sensor—high-voltage plucked excitation or low-voltage scanning frequency excitation. But both of them have disadvantages. The disadvantages of high-voltage plucked excitation are that it has a large damage to sensor, the signals got through this way attenuate fast, and measurement accuracy of the signals is poor. On the other hand, low-voltage sweeping excitation scans a long time and signals got though this way are hard to catch. This paper proposes a kind of feedback type low excitation method, which is pre-excite a sensor with a lower voltage on plucked vibration, and use vibration frequency got from this way as output of the excitation driver to vibrate the sensor for the second time. Because the feedback signal frequency is approximate to the real one, the string can reach a resonance state in a very short time. The optimal excitation strategy is verified by a new designed exciting and measuring circuit. It is confirmed that resonance amplitude can be larger in a shorter excitation time by this way, and result in an enhanced anti-interference ability, reduced the cost of signal processing circuit, increased available measuring time and improved the accuracy of frequency measurement.

2009 ◽  
Vol 129 (8) ◽  
pp. 1511-1517
Author(s):  
Nicodimus Retdian ◽  
Jieting Zhang ◽  
Takahide Sato ◽  
Shigetaka Takagi

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jun Xu ◽  
Xiang Cui ◽  
Huiyuan Zhang

AbstractThe electric eel is a unique species that has evolved three electric organs. Since the 1950s, electric eels have generally been assumed to use these three organs to generate two forms of electric organ discharge (EOD): high-voltage EOD for predation and defense and low-voltage EOD for electrolocation and communication. However, why electric eels evolved three electric organs to generate two forms of EOD and how these three organs work together to generate these two forms of EOD have not been clear until now. Here, we present the third form of independent EOD of electric eels: middle-voltage EOD. We suggest that every form of EOD is generated by one electric organ independently and reveal the typical discharge order of the three electric organs. We also discuss hybrid EODs, which are combinations of these three independent EODs. This new finding indicates that the electric eel discharge behavior and physiology and the evolutionary purpose of the three electric organs are more complex than previously assumed. The purpose of the middle-voltage EOD still requires clarification.


Processes ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 1112
Author(s):  
Yu-En Wu ◽  
Jyun-Wei Wang

This study developed a novel, high-efficiency, high step-up DC–DC converter for photovoltaic (PV) systems. The converter can step-up the low output voltage of PV modules to the voltage level of the inverter and is used to feed into the grid. The converter can achieve a high step-up voltage through its architecture consisting of a three-winding coupled inductor common iron core on the low-voltage side and a half-wave voltage doubler circuit on the high-voltage side. The leakage inductance energy generated by the coupling inductor during the conversion process can be recovered by the capacitor on the low-voltage side to reduce the voltage surge on the power switch, which gives the power switch of the circuit a soft-switching effect. In addition, the half-wave voltage doubler circuit on the high-voltage side can recover the leakage inductance energy of the tertiary side and increase the output voltage. The advantages of the circuit are low loss, high efficiency, high conversion ratio, and low component voltage stress. Finally, a 500-W high step-up converter was experimentally tested to verify the feasibility and practicability of the proposed architecture. The results revealed that the highest efficiency of the circuit is 98%.


2014 ◽  
Vol 23 (08) ◽  
pp. 1450108 ◽  
Author(s):  
VANDANA NIRANJAN ◽  
ASHWANI KUMAR ◽  
SHAIL BALA JAIN

In this work, a new composite transistor cell using dynamic body bias technique is proposed. This cell is based on self cascode topology. The key attractive feature of the proposed cell is that body effect is utilized to realize asymmetric threshold voltage self cascode structure. The proposed cell has nearly four times higher output impedance than its conventional version. Dynamic body bias technique increases the intrinsic gain of the proposed cell by 11.17 dB. Analytical formulation for output impedance and intrinsic gain parameters of the proposed cell has been derived using small signal analysis. The proposed cell can operate at low power supply voltage of 1 V and consumes merely 43.1 nW. PSpice simulation results using 180 nm CMOS technology from Taiwan Semiconductor Manufacturing Company (TSMC) are included to prove the unique results. The proposed cell could constitute an efficient analog Very Large Scale Integration (VLSI) cell library in the design of high gain analog integrated circuits and is particularly interesting for biomedical and instrumentation applications requiring low-voltage low-power operation capability where the processing signal frequency is very low.


2021 ◽  
Vol 42 (Supplement_1) ◽  
pp. S130-S131
Author(s):  
Andrew Khalifa ◽  
Anzar Sarfraz ◽  
Jacob B Avraham ◽  
Ronnie Archie ◽  
Matthew Kaminsky ◽  
...  

Abstract Introduction Electrical injuries represent 0.4–3.2% of admissions to burn units and are responsible for >500 deaths per year in the United States. Approximately half occur in the workplace and are the fourth leading cause of work-related-traumatic death. The extent of injury can be drastically underestimated by total body surface area percentage (TBSA). Along with cutaneous burns, high voltage electrical injuries can lead to necrosis of muscle, bone, nervous tissue, and blood vessels. Aggressive management allows for patient survival, but at significant cost. Newer technologic advances help improve functional outcomes. Methods This case-report was conducted via retrospective chart review of the case presented. Results A 43-year-old male sustained a HVEI (>10, 000 V) after contacting an active wire while working as a linesman for an electric company. He presented after less than 15-minute transport from an outside hospital with full thickness burns and auto-amputation to all fingers on both hands and the distal third of the left hand (Images 1 and 2). There were full thickness circumferential burns to the entire left and right upper extremities with contractures, with the burns extending into the axilla, and chest wall musculature. The patient had 4th degree burns and a large wound to the left shoulder with posterior extension to the scapula, flank and back with approximately 25% TBSA (Image 3). Compartments were tense in both upper extremities. Patient was sedated and intubated to protect the airway and placed on mechanical ventilation. A femoral central line was then placed, and the patient was given pain control, continued fluid resuscitation, and blood products. Dark red colored urine from a foley catheter that was immediately identified as rhabdomyolysis induced myoglobinuria. Labs drawn demonstrated elevated troponin I, CK >40,000. BUN 18, creatinine 1.0, K+ 5.2 and phosphate 5.6. Decision was made immediately for operative intervention with emergent amputation of both upper extremities in the light of rhabdomyolysis secondary to tissue necrosis and oliguria. During the patient’s hospital course, he underwent multiple operations for further debridement with vacuum-assisted closure therapy and skin grafting of sites, as well as targeted muscle reinnervation (TMR) 6 months later at an outside hospital. Conclusions Although HVEI only account for a small percentage of burn admissions, they are associated with greater morbidity than low-voltage injuries. Patients with HVEI often incur multiple injuries, more surgical procedures, have higher rates of complications, and more long term psychological and rehabilitative difficulties. Despite the need for amputation in some of these critically ill patients, options exist that allow for them to obtain long term functional success.


Sign in / Sign up

Export Citation Format

Share Document