Modal Analysis of the Main Frame of Horizontal Type High-Pressure Grouting Machine Based on ANSYS

2012 ◽  
Vol 170-173 ◽  
pp. 3059-3062
Author(s):  
Zhi Cheng Huang ◽  
Ze Lun Li
Keyword(s):  
Finite Element ◽  
High Pressure ◽  
Modal Analysis ◽  
Vibration Modes ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Horizontal Type ◽  
Pressure Grouting ◽  
The Stability ◽  
Main Frame

For understanding the dynamic characteristics and improving the stability of the main frame of the horizontal type high-pressure grouting machine, the finite element analysis software ANSYS is applied to the modal analysis of the main frame based on the theory of finite element and vibration mechanics, and the first six natural frequencies and the corresponding vibration modes of the main frame are obtained. The influence of each vibration mode to the working condition of the main frame is analyzed, and provides some reference to improve and enhance the design of the main frame of horizontal type high-pressure grouting machine.

Finite Element Modal Analysis of Frame of Vertical Type High-Pressure Grouting Machine Based on ANSYS

2012 ◽  
Vol 184-185 ◽  
pp. 235-238
Author(s):  
Zhi Cheng Huang ◽  
Ze Lun Li
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Pressure ◽  
Structural Design ◽  
Natural Frequencies ◽  
Vibration Modes ◽  
Element Analysis ◽  
Design And Optimization ◽  
The Finite Element Analysis ◽  
Pressure Grouting

The frame of 4MPa vertical type high-pressure grouting machine is used as the research object. The finite element analysis software ANSYS is applied to the modal finite element analysis of the frame. The first five order natural frequencies and the corresponding vibration modes of the frame are obtained, and then the influence of every mode shape on the performances of the frame was discussed. It provides a reference for the dynamic structural design and optimization of the frame of vertical type high-pressure grouting machine.

The Finite Element Analysis on the Mainframe of High-Pressure Grouting Machine

2011 ◽  
Vol 94-96 ◽  
pp. 2153-2156
Author(s):  
Dong Ling Yu
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Pressure ◽  
Static Analysis ◽  
High Strength ◽  
Value Engineering ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Pressure Grouting ◽  
Strength And Stiffness

The mainframe of high-pressure grouting machine used for daily ceramics is the main load bearing member, and it has high strength and stiffness requirements. The finite element static analysis on mainframe is discussed in this paper for researching its stress and transfiguration. The result can provide reference for design, and the discussion has some generality and practical value engineering.

CAD/CAE on the Mould Plates of Horizontal Type High-Pressure Grouting Machine

2012 ◽  
Vol 164 ◽  
pp. 317-321
Author(s):  
Zhi Cheng Huang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Pressure ◽  
Stress And Strain ◽  
Cad Model ◽  
Analysis Software ◽  
Element Analysis ◽  
Horizontal Type ◽  
Pressure Grouting ◽  
Object Of Study

In order to study the stress and strain of front and back mould plates of high pressure grouting machine, this paper took a type of ceramics for daily use horizontal type high pressure grouting machine as the object of study. Established its CAD model and analysed it with finite element analysis software. The analysis results can provide a reference for design, and have some engineering and practical value.

Modal Analysis of Special High-Pressure Seamless Cylinders Based on ANSYS 12.0

2013 ◽  
Vol 546 ◽  
pp. 122-126
Author(s):  
Xiao Long Hu ◽  
Zhong Bao Qin ◽  
Jian Feng Guo ◽  
Ying Juan Yue
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Pressure ◽  
Modal Analysis ◽  
Natural Frequency ◽  
Vibration Frequencies ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
The Impact

This paper discussed the impact of the quantity and position of constraint on the natural frequency of special high-pressure seamless cylinders. The Finite Element modal of the special high-pressure seamless cylinders was constructed based on ANSYS12.0. The vibration frequencies and modal shapes under different conditions were obtained by the Finite Element analysis. The result will be used for improving the safe capability of the Special High-pressure Seamless Cylinders.

CAD/CAE on the Main Frame of Horizontal Type High-Pressure Grouting Machine

2012 ◽  
Vol 516-517 ◽  
pp. 722-725
Author(s):  
Zhi Cheng Huang
Keyword(s):  
Finite Element ◽  
High Pressure ◽  
Static Analysis ◽  
Stress And Strain ◽  
Cad Model ◽  
Horizontal Type ◽  
Pressure Grouting ◽  
Object Of Study ◽  
Main Frame

Taking a type of ceramics for daily use horizontal high pressure grouting machine‘s main frame as the object of study, established its CAD model and in order to study the stress and strain, conducted finite element static analysis on it . The analysis results can provide a reference for design of the main frame, and have a large general engineering and practical value.

The Static Rigidity Analysis of the Position Adjustable Computer Table

2009 ◽  
Vol 626-627 ◽  
pp. 807-812
Author(s):  
Wei Shin Lin ◽  
Chiu Fan Hsieh
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Modal Analysis ◽  
Analysis Software ◽  
Element Analysis ◽  
Rigidity Analysis ◽  
The Finite Element Analysis ◽  
Static Rigidity ◽  
The Stability ◽  
Specification Requirement

This study is pointed to a computer table with five degree of freedom. The table position could be adjusted freely. The height of the tabletop also could be moved freely. The finite element analysis software ANSYS was used to analysis the strength and rigidity of the computer table. From the analysis results, it can be found that the strength and rigidity were fit in with the specification requirement with a safety factor of 1.20. From the modal analysis results, it also found that the stability of the computer was confirmed to the users.

CAD/CAE on the Mould Plates of Vertical Type High-Pressure Grouting Machine

2012 ◽  
Vol 538-541 ◽  
pp. 2681-2684
Author(s):  
Zhi Cheng Huang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Pressure ◽  
3D Model ◽  
Stress And Strain ◽  
Analysis Software ◽  
Element Analysis ◽  
Pressure Grouting ◽  
Object Of Study

Took a type of ceramics for daily use vertical type high pressure grouting machine as the object of study, study the stress and strain of its upper and lower mould plates. Established their 3D model by CAD software Pro-E, and then import them into finite element analysis software to analysis the value and distribution of the stress and strain. The analysis results can provide some reference for design, and have some engineering and practical value.

Fatigue Strength Study on Radial Bogie Vice Frame Based on Finite Element Analysis

2015 ◽  
Vol 723 ◽  
pp. 96-99
Author(s):  
Xiao Wei Wang ◽  
Mao Xiang Lang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Fatigue Life ◽  
Fatigue Strength ◽  
Structural Strength ◽  
Simulation Software ◽  
Experimental Result ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
The Stability

The vice frame bears and transfers the forces and loads between the bogie and the vehicle body.The strength of the vice frame relates directly to the stability and smoothness of the vehicle. In this study, finite element analysis is utilized first to analyse the structural strength and fatigue life of the vice frame, and the recognize the weak parts of its structure in order to enhance its structural strength in the following design work.The finite element analysis is performed on a simulation software Ansys. Then an experiment is designed to test the fatigue strength of the vice frame. The experimental result indicates that the fatigue strength of the object corresponds to the standards and the finite element analysis has high feasibility in solving this kind of problem.

The Finite-Element Analysis of the Main Frame of the Airborne Photoelectric Platform

2012 ◽  
Vol 562-564 ◽  
pp. 1943-1946
Author(s):  
Yong Hu ◽  
Jin Gan Song ◽  
Qing Zou ◽  
Ke Zhu ◽  
Xiao Long Wang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Weak Links ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Overall Performance ◽  
Sufficient Strength ◽  
Ansys Workbench ◽  
Main Frame

Because both of the volume and the weight of the photoelectric platform are small, the structure of two frames and two axes is used in the photoelectric platform. As the key component of the photoelectric platform, the main frame should have sufficient strength and rigidity. In order to achieve this object, three-dimensional entity model of the main frame is established using CATIA software. Then the finite-element analysis of the model is finished with ANSYS Workbench. Based on the analysis results, the weak links of the main frame is found. Then these links are improved and the main frame is analyzed again. After improving the structure, the results of the finite-element analysis show that the main frame meets the requirements of design and has perfect overall performance.

Sign in / Sign up

Export Citation Format

Share Document