CAD/CAE on the Mould Plates of Vertical Type High-Pressure Grouting Machine

2012 ◽  
Vol 538-541 ◽  
pp. 2681-2684
Author(s):  
Zhi Cheng Huang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Pressure ◽  
3D Model ◽  
Stress And Strain ◽  
Analysis Software ◽  
Element Analysis ◽  
Pressure Grouting ◽  
Object Of Study

Took a type of ceramics for daily use vertical type high pressure grouting machine as the object of study, study the stress and strain of its upper and lower mould plates. Established their 3D model by CAD software Pro-E, and then import them into finite element analysis software to analysis the value and distribution of the stress and strain. The analysis results can provide some reference for design, and have some engineering and practical value.

CAD/CAE on the Mould Plates of Horizontal Type High-Pressure Grouting Machine

2012 ◽  
Vol 164 ◽  
pp. 317-321
Author(s):  
Zhi Cheng Huang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Pressure ◽  
Stress And Strain ◽  
Cad Model ◽  
Analysis Software ◽  
Element Analysis ◽  
Horizontal Type ◽  
Pressure Grouting ◽  
Object Of Study

In order to study the stress and strain of front and back mould plates of high pressure grouting machine, this paper took a type of ceramics for daily use horizontal type high pressure grouting machine as the object of study. Established its CAD model and analysed it with finite element analysis software. The analysis results can provide a reference for design, and have some engineering and practical value.

Finite Element Analysis on Stress and Strain of Protected Fiber Bragg Grating

2010 ◽  
Vol 148-149 ◽  
pp. 1639-1642
Author(s):  
Jian Feng Xie
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Theoretical Analysis ◽  
Fiber Bragg Grating ◽  
Bragg Grating ◽  
Stress And Strain ◽  
Analysis Software ◽  
Element Analysis ◽  
Varied Temperature

The stresses and strains on the protected FBG and protected layer under varied temperature were analyzed in theory. In order to verify the theoretical analysis of stress and strain,a finite element analysis software(ANSYS) was used to simulate the stresses and strains on the protected FBG and protected layer. Both simulation and theoretical analysis are show that the strain and stress on protected layer in r direction decreases with the increasing of radius(r), while the strain and stress in direction increases with the increasing of radius(r) . The results of theoretical analysis matches the ones form simulations well.

The Finite Element Analysis on the Mainframe of High-Pressure Grouting Machine

2011 ◽  
Vol 94-96 ◽  
pp. 2153-2156
Author(s):  
Dong Ling Yu
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Pressure ◽  
Static Analysis ◽  
High Strength ◽  
Value Engineering ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Pressure Grouting ◽  
Strength And Stiffness

The mainframe of high-pressure grouting machine used for daily ceramics is the main load bearing member, and it has high strength and stiffness requirements. The finite element static analysis on mainframe is discussed in this paper for researching its stress and transfiguration. The result can provide reference for design, and the discussion has some generality and practical value engineering.

The Simulation of Rolling Process of Wire with Y-Type Roller

2014 ◽  
Vol 602-605 ◽  
pp. 709-712
Author(s):  
Jin Hong Ma ◽  
Bin Tao ◽  
Xiao Han Yao
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Rolling Mill ◽  
Three Dimensional ◽  
Rolling Process ◽  
Stress And Strain ◽  
Analysis Software ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Three Dimensional Models

Y-Type rolling mill with three roller is a new kind of wire mill.The three-dimensional models of rolling are established by Pro/E. Based on the finite element analysis software ANSYS/LS-DYNA, the rolling process of wire by Y-type rollers is simulated. The rolling piece movement is analysed. Stress and strain of Y-type roller are also analysed.

Finite Element Analysis on Stress and Strain of Embedded Fiber Bragg Grating

2010 ◽  
Vol 148-149 ◽  
pp. 1634-1638
Author(s):  
Jian Feng Xie
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Theoretical Analysis ◽  
Fiber Bragg Grating ◽  
Cement Mortar ◽  
Bragg Grating ◽  
Stress And Strain ◽  
Analysis Software ◽  
Element Analysis ◽  
Varied Temperature

After FBG was protected and embedded into cement mortar, the stresses and strains on the FBG ,protected layer and cement mortar under varied temperature were analyzed in theory. In order to verify the theoretical analysis of stress and strain,a finite element analysis software(ANSYS)was used to simulate the stresses and strains on the FBG ,protected layer and cement mortar. The results of theoretical analysis matches the ones form simulations well.

scholarly journals The modeling design integral the electrostatic microelectromechanical switch of capacitive type

2019 ◽  
Vol 30 ◽  
pp. 06005
Author(s):  
Igor E. Lysenko ◽  
Alexey V. Tkachenko ◽  
Olga A. Ezhova ◽  
Boris G. Konoplev
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Performance ◽  
3D Model ◽  
Switching Time ◽  
Analysis Software ◽  
Element Analysis ◽  
Software Complex ◽  
Static Modeling

This article presents the optimization and static modeling of the design an integral microelectromechanical switch of capacitive type based on a parametric 3D model using finite element analysis software complex ANSYS. The values of the pull-down voltage and switching time are determined. The obtained results give a good theoretical help in the development of various high-performance electrostatic microelectromechanical switches.

Finite Element Modal Analysis of Frame of Vertical Type High-Pressure Grouting Machine Based on ANSYS

2012 ◽  
Vol 184-185 ◽  
pp. 235-238
Author(s):  
Zhi Cheng Huang ◽  
Ze Lun Li
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Pressure ◽  
Structural Design ◽  
Natural Frequencies ◽  
Vibration Modes ◽  
Element Analysis ◽  
Design And Optimization ◽  
The Finite Element Analysis ◽  
Pressure Grouting

The frame of 4MPa vertical type high-pressure grouting machine is used as the research object. The finite element analysis software ANSYS is applied to the modal finite element analysis of the frame. The first five order natural frequencies and the corresponding vibration modes of the frame are obtained, and then the influence of every mode shape on the performances of the frame was discussed. It provides a reference for the dynamic structural design and optimization of the frame of vertical type high-pressure grouting machine.

Finite Element Analysis on the Fatigability of the 4G1 Engine Support with Software ANSYS

2010 ◽  
Vol 663-665 ◽  
pp. 1329-1332
Author(s):  
Xiao Guang Fu ◽  
Xiao Jun Wang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
3D Model ◽  
Analysis Software ◽  
Element Analysis ◽  
The Finite Element Analysis

A complicated 3D model was established to solve the problem of the lifetime of an engine support. With the finite element analysis software ANSYS, we analyzed the fatigue problem for an engine support and derived the numerical values of the lifetime of a typical engine support. Our work provides the fundamental guidance to optimize the structure of the engine support.

CAD/CAE on the Main Frame of Horizontal Type High-Pressure Grouting Machine

2012 ◽  
Vol 516-517 ◽  
pp. 722-725
Author(s):  
Zhi Cheng Huang
Keyword(s):  
Finite Element ◽  
High Pressure ◽  
Static Analysis ◽  
Stress And Strain ◽  
Cad Model ◽  
Horizontal Type ◽  
Pressure Grouting ◽  
Object Of Study ◽  
Main Frame

Taking a type of ceramics for daily use horizontal high pressure grouting machine‘s main frame as the object of study, established its CAD model and in order to study the stress and strain, conducted finite element static analysis on it . The analysis results can provide a reference for design of the main frame, and have a large general engineering and practical value.

Sign in / Sign up

Export Citation Format

Share Document