RAP Percentage and Warm Mix Additive Influence on Regenerated Asphalt Mixture Performance

2012 ◽  
Vol 251 ◽  
pp. 436-441 ◽  
Author(s):  
Wei Liu
Keyword(s):  
Adverse Effect ◽  
High Temperature ◽  
Low Temperature ◽  
Adverse Effects ◽  
Production Process ◽  
Asphalt Mixture ◽  
Economical Efficiency ◽  
Temperature Performance ◽  
Low Temperature Performance ◽  
Additive Influence

The warm mix regeneration technology has prominent economical efficiency that can not only reduce the secondary aging of new asphalt and old asphalt in RAP materials during the production process, but also improve the use proportion of RAP materials. As for the increase of RAP dosage and the warm mix additive added to influence the plant regenerated asphalt mixture performance, this paper adopts two kinds of warm mix additive for the test and analysis of the warm mix regenerated asphalt mixture performance with 20% and 60% RAP. The results indicate that magnify the proportion of RAP percentage makes contribution to further improve high-temperature performance of the regenerated mixture, but it has adverse effects on water resistant damage performance and low-temperature performance. At the same time, adopting the warm mix additive can significantly reduce the adverse effect, so warm mix regenerated technology has better feasibility.

Applied Research of the Modifying Agent of Rubber Plastic Composite (MaR) in Asphalt Mixture

2013 ◽  
Vol 477-478 ◽  
pp. 1175-1178
Author(s):  
Ling Zou ◽  
Jing Wei Ne ◽  
Weng Gang Zhang
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Bending Test ◽  
Water Stability ◽  
Modified Asphalt ◽  
Modifying Agent ◽  
Temperature Performance ◽  
Splitting Test ◽  
Low Temperature Performance

70# and 90# matrix asphalt mixture with MaR were studied through dynamic modulus test, rutting test, freeze-thaw splitting test, bending test to study the applicability of the Modifying agent of rubber plastic compound (MaR) in matrix asphalt mixture.Test results were Compared with SBSI-C modified asphalt mixture.The results indicate that: high-temperature stability of MaR+70# asphalt mixture is as well as SBSI-C modified asphalt mixture,and is bettere than MaR+90# asphalt mixture; water stability of MaR+90# asphalt mixture is bettere than SBSI-C modified asphalt mixture and MaR+70# asphalt mixture; low temperature performance of MaR+90# asphalt mixture is bettere than MaR+70# asphalt mixture, but is worse than modified asphalt mixture SBSI-C ; MaR+70# asphalt mixture can be first used in area of resisting high temperature and rutting, MaR+90# asphalt mixture can be used if the water stability performance and low temperature performance are considered.

Impact of Rheological Properties of Fiber Asphalt Mortar on Mixture Road Performance

2013 ◽  
Vol 734-737 ◽  
pp. 2287-2291 ◽  
Author(s):  
De Dong Guo
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Rheological Properties ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Fiber Content ◽  
High Temperature Stability ◽  
Temperature Performance ◽  
Low Temperature Performance ◽  
Asphalt Mortar

Fiber asphalt concrete has been more and more widely used in highway construction. For analyzing high and low temperature performance of fiber asphalt mixture, rheological properties of fiber asphalt mortar were studied through indoor test. Impact of Rheological properties of the fiber asphalt mortar on high temperature and low temperature properties of asphalt mixture was analyzed. Results showed that the larger fiber content was, the better performance of asphalt mixture's high temperature stability, fiber asphalt mortar rut factor and rutting tests results of asphalt mixture were linear correlation, reflecting the high temperature performance of asphalt mixture; With the increase of fiber content, variation of stiffness modulus, creep rate indicators and mixture low temperature performance was consistent, and rheological properties of fiber asphalt mortar could characterize low temperature performance of asphalt mixture.

Analysis of Low Temperature and High Temperature Performance of Different Aggregate SMA

2013 ◽  
Vol 834-836 ◽  
pp. 252-258
Author(s):  
Peng Ren ◽  
Bo Zhang ◽  
Ya Qiao Wang ◽  
Lu Zhang ◽  
Lin Zhao
Keyword(s):  
Experimental Data ◽  
High Temperature ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Limestone Aggregate ◽  
Temperature Performance ◽  
Low Temperature Performance ◽  
Temperature Test ◽  
Better Than

Three kinds of combination schemes were designed about SMA-13 asphalt mixture. They were basalt aggregate SMA, limestone aggregate SMA, basalt and limestone aggregate SMA. Through the study of low temperature and high temperature test of three kinds of combination, the low temperature performance of basalt and limestone aggregate SMA was better than that of the basalt aggregate SMA; and the high temperature performance was in between, thus providing important experimental data for the limestones replacing basalt in SMA pavement.

Study on Pavement Performance of Reclaimed Asphalt Mixture

2011 ◽  
Vol 204-210 ◽  
pp. 2075-2078
Author(s):  
Hao Li ◽  
Rui Zhou ◽  
Xuan Cang Wang
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Pavement Performance ◽  
High Temperature Stability ◽  
Reclaimed Asphalt ◽  
Content Selection ◽  
Temperature Performance ◽  
Splitting Test ◽  
Low Temperature Performance

In order to improve the pavement performance of reclaimed asphalt mixture, using Marshall test, rutting test, splitting test and long-term aging test, taking stability, dynamic stability, fatigue strength, stiffness modulus, and freeze-thaw splitting tension strength as the target, the influence law of old asphalt mixture content and regenerant content on pavement performance of reclaimed asphalt mixture is systematically studied. The results show that: the proportion of old asphalt mixture has no influence on high temperature performance of reclaimed asphalt mixture. With the proportion of old mixture increases, the optimum asphalt-aggregate ratio, low temperature performance, water stability, and anti-aging property of reclaimed asphalt mixture decrease. Addition of regenerant improves the low temperature performance of reclaimed asphalt mixture, and reduces the strength and high temperature stability of reclaimed asphalt mixture. Research results have great guiding significance for old asphalt mixture content selection, regenerant content selection and improving pavement performance of reclaimed asphalt mixture.

scholarly journals High and Low-Temperature Performance Evaluation and Microanalysis of SMCSBS Compound-Modified Asphalt

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 771
Author(s):  
Yu Sun ◽  
Dongpo He
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Modified Asphalt ◽  
The Road ◽  
Temperature Performance ◽  
Creep Stiffness ◽  
Low Temperature Performance ◽  
Styrene Butadiene ◽  
Sbs Modified Asphalt

The mixture of styreneic methyl copolymers (SMCs) normal temperature-modified asphalt and styrene-butadiene styrene block copolymer (SBS)-modified asphalt (SMCSBS) compound-modified asphalt was investigated in this study. The viscosity and temperature properties of compound modified asphalt (SMCSBS) were studied by Brookfield rotary viscosity test. Dynamic shear rheometer (DSR) and bending beam rheometer (BBR) were used to test SMCSBS compound modified asphalt with different SMC additions. Finally, the microstructure and physicochemical properties of SMCSBS were evaluated by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR), and the modification mechanism of the SMCSBS was studied. The results show that the viscosity of the compound-modified asphalt added with SMC is improved, which is conducive to improving its workability. With the increase of SMC content, the high-temperature performance of the compound modified asphalt firstly increases and then decreases with the increase of SMC content. When the content of SMC is 12%, its high-temperature performance is the best. Compared with SBS-modified asphalt, the SMCSBS has better low-temperature performance, and the creep stiffness S and creep rate m of the SMC with different content are better than that of SBS. Finally, the microcosmic characteristics show that the SMC can give full play to its characteristics and can be uniformly dispersed in SBS modified asphalt. SMC is essentially a surfactant, which can reduce the viscosity and construction temperature by changing the surface tension and surface free energy of asphalt molecules. The curing agent of epoxy resin is slowly cross-linked and cured after contacting with air to form a certain strength, thus improving the road performance of the asphalt mixture.

Research on Separation and Regeneration Aggregate of Recycled Asphalt Mixture Road Performance

2015 ◽  
Vol 1095 ◽  
pp. 276-279
Author(s):  
Xin Feng Zhou ◽  
Xi Juan Xu
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Recycled Aggregate ◽  
Water Stability ◽  
Recycled Asphalt ◽  
Aggregate Content ◽  
Temperature Performance ◽  
Road Performance ◽  
Low Temperature Performance

Through the research of different separation and regeneration aggregate content, different types of regenerative high temperature stability, low temperature performance and water stability performance of asphalt mixture comprehensively, the results show that: with the increase of recycled aggregate content, improves the high temperature properties of recycled asphalt mixture, low temperature performance and water stability are reduced, the admixture when regeneration aggregate is 20 ~ 25%, recycled asphalt mixture has good road performance. Key words: road engineering;waste asphalt mixture;separation and regeneration aggregate;road performance

Evaluation of Service Performance of Recycled SBS Modified Asphalt Pavement

2014 ◽  
Vol 1079-1080 ◽  
pp. 152-155
Author(s):  
Yuan Yuan Wang ◽  
Lu Sun
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Pavement Materials ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Marshall Test ◽  
Moisture Stability ◽  
Low Temperature Performance ◽  
Sbs Modified Asphalt

Using the waste pavement materials can not only save resources such as bitumen and aggregate, but also reduce the pollution of environment. In this study, the high temperature performance and the moisture stability of recycled SBS modified asphalt mixture were evaluated by rutting test, immersion Marshall Test and freeze-thaw splitting routine test. In addition, the low temperature performance of recycled modified mixture was also analyzed by Fénix test whose operation was simple. The tests results illustrated that it was advantageous to improve the high temperature performance of recycled mixture and it has less influence on moisture stability with the addition of RAP. However, it had a significant adverse effect on the low temperature performance for recycled SBS modified asphalt mixture with a large quantity of RAP content. Therefore, it suggests that the RAP content for recycled SBS modified mixture is not too high.

scholarly journals Study on Performance Damage and Mechanism Analysis of Asphalt under Action of Chloride Salt Erosion

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3089
Author(s):  
Peilei Zhou ◽  
Wensheng Wang ◽  
Lili Zhu ◽  
Haoyun Wang ◽  
Yongming Ai
Keyword(s):  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
High Temperature ◽  
Low Temperature ◽  
Temperature Sensitivity ◽  
Salt Solution ◽  
Solution Concentration ◽  
Chloride Salt ◽  
Temperature Performance ◽  
Low Temperature Performance

This study aims to investigate the performance evolution and mechanism of asphalt under action of chloride salt erosion. Asphalt samples soaked with five different snow melting chloride salt concentrations were taken as the research object. Then, the high-temperature performance, low-temperature performance, temperature sensitivity and asphalt–aggregate adhesion property of asphalt samples were carried out. Additionally, Fourier transform infrared spectroscopy (FTIR) was used to explore the mechanism of chloride salt erosion on asphalt. Test results showed the linear variation relationships of high-temperature performance, low-temperature performance and temperature sensitivity with chloride salt concentrations. The high-temperature performance of asphalt would be improved by chloride snowmelt salt. With the increase in the chloride salt solution concentration, the low-temperature performance of asphalt became worse, and the temperature sensitivity increased. Moreover, after the effect of the chloride salt solution, the asphalt–aggregate adhesion property decreased with the increase in the chloride salt solution concentration. It is necessary to control the amount of chloride snowmelt salt in the actual snow removal projects. Finally, based on Fourier transform infrared spectroscopy, the mechanism of chloride salt erosion on asphalt was preliminarily explored. With the increase in the chloride salt solution concentration, the proportion of light components (saturated fraction, aromatic fraction) in asphalt decreased, and the proportion of heavy components (resin and asphaltene) with good thermal stability increased.

scholarly journals Experimental Study of Low Temperature Performance of Porous Asphalt Mixture

2021 ◽  
Vol 11 (9) ◽  
pp. 4029
Author(s):  
Jian Wang ◽  
Pui-Lam Ng ◽  
Yuhua Gong ◽  
Han Su ◽  
Jinsheng Du
Keyword(s):  
Low Temperature ◽  
Test Temperature ◽  
Asphalt Mixture ◽  
Aging Condition ◽  
Porous Asphalt ◽  
Bending Strain ◽  
Temperature Performance ◽  
Temperature Environment ◽  
Modifier Content ◽  
Low Temperature Performance

Porous asphalt mixture can be used as a road surface paving material with the remarkable advantage to prevent water accumulation and ponding. However, the performance of porous asphalt mixture in low temperature environment has not been thoroughly investigated, and this forms the subject of research in the present study. The mineral aggregate gradation of porous asphalt mixture was designed based on Bailey method, and the low temperature performance of porous asphalt mixture was studied by means of the low temperature bending test. The factors affecting the low temperature performance of porous asphalt mixture were analyzed through the orthogonal experimental design method, and the effects of porosity, modifier content, aging condition, and test temperature on the low temperature performance of porous asphalt mixture were evaluated. The results showed that the modifier content was the most important factor affecting the low temperature performance of porous asphalt mixture, followed by the test temperature, while the porosity and the aging condition were the least. Among the three performance evaluation indicators, namely the flexural tensile strength, maximum bending strain, and bending stiffness modulus, the maximum bending strain had the highest sensitivity to the porosity. It can be seen from the single factor influence test of porosity that there existed an approximately linear relationship between the maximum bending strain and the porosity of porous asphalt mixture, and the maximum bending strain decreased with increasing porosity. Furthermore, in order to ensure the good working performance of porous asphalt mixture in low temperature environment, the porosity should also satisfy the required limits of the maximum bending strain.

Sign in / Sign up

Export Citation Format

Share Document