The Comprehensive Processing Methods on Reproducing of the Image of Relic on Subtle Levels

2012 ◽  
Vol 262 ◽  
pp. 190-194
Author(s):  
Xiao Qi Chen

Culture relics, as the remains of legacy in the development of human history, are unduplicated. And making the image of relics, therefore, is significant at protecting, studying and appreciating the cultural relics and even promoting the heritage of human civilization. Subtle level of relic image, as the main part for image duplication always reflects original characteristics and texture of the image. The relic’s density is adjusted to the maximum of the visual identification through centering the relics in the image for black and white points calibration. Adjusting tone curve can represent the relic’s texture to satisfy the requirements of the visual artistic appreciation in accordance with the concrete characteristics of the cultural relic’s image. Based on color adjustment, the detail expression and level texture of the relic can be emphasized. Using image processing method furthers refined correction to ensure the whole density of image and equilibrium of the level. Sharpen the image of relics to intensify the subtle level in accordance with Mach Band Effect. These basic principle and method such as level tone and color adjustment combined with the relevant image processing methods is applied comprehensively to the image duplication, which can represent and promote the subtle level of the image as well as the relics’ style with high quality.

Buildings ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 158
Author(s):  
Albert Albareda-Valls ◽  
Alejandra Bustos Herrera ◽  
Joan Zamora Mestre ◽  
Saeid Zaribaf

Image processing methods are increasingly used in civil engineering, especially in the maintenance of concrete structures. Current digital cameras and post-processing methods allow verifying qualitatively the state of conservation of wide areas of concrete in dams and bridges. When dealing with building refurbishments and rehabilitation, it is important to verify that existing structural elements fit the requirements of the standards; in the case of structures formed by traditional RC joists, cracking of the bottom-face provides information about the serviceability of these elements. This research proposed and put in practice through experimental tests an image post-processing method for quantification of cracking (five specimens were used and calibrated). Based on a sequence of shots and through a complex step-by-step post-processing, cracks were identified and measured to calibrate this method for real purposes. The method quantifies the crack opening width and spacing by analyzing the bottom-face of the joists through the shots. Measured values of crack spacing are very similar to those predicted by the standards, while the values of crack opening width differ more from theoretical ones due to the scattering of results. However, the proposed method has been proved as suitable and useful for fast inspections of RC elements under bending.


2011 ◽  
Vol 325 ◽  
pp. 300-305
Author(s):  
Shizuichi Higuchi ◽  
Hiroaki Takai ◽  
Hideo Kato ◽  
Kazuya Okawa

Vibration finishing which is often applied to the metal surfaces recently is the finishing method using a disk-type finishing tool with movements of rotational and orbital motion [1]. However, an application of this finishing method and an evaluation of finished surfaces require skills and sensory examinations. This is because the relations between finishing conditions and quality of finished surfaces are not clear. In recent years, image processing methods for evaluating finished surface roughness and texture analysis were proposed [2 - 5]. However, quantitative evaluation has not been fully done.


1989 ◽  
Vol 4 ◽  
pp. 336-341
Author(s):  
Rodney M. Feldmann

Preparation of appropriate photographs is absolutely essential in conveying paleontological information. The effort expended in adequate cleaning and preparation of specimens is not only reflected in exposing the detail of material so that it can be properly described but also in permitting the morphologic information to be transmitted to others through photography. Therefore the purpose of this chapter is to describe the general procedures involved in preparing high quality, publishable photographs because special techniques related to photography of microfossils will be treated elsewhere, the emphasis within this chapter will be upon photography of macrofossils, specimens large enough to be photographed using a normal spectrum of photographic lenses and extension tubes. Because nearly all paleontological material is illustrated as black and white photographs, no reference will be made to the preparation of color illustrations.


Author(s):  
Seok Lee ◽  
Juyong Park ◽  
Dongkyung Nam

In this article, the authors present an image processing method to reduce three-dimensional (3D) crosstalk for eye-tracking-based 3D display. Specifically, they considered 3D pixel crosstalk and offset crosstalk and applied different approaches based on its characteristics. For 3D pixel crosstalk which depends on the viewer’s relative location, they proposed output pixel value weighting scheme based on viewer’s eye position, and for offset crosstalk they subtracted luminance of crosstalk components according to the measured display crosstalk level in advance. By simulations and experiments using the 3D display prototypes, the authors evaluated the effectiveness of proposed method.


2017 ◽  
Vol 53 ◽  
pp. 115-119
Author(s):  
A. V. Dymchuk ◽  
O. I. Lyubynskyy

The studies of the dynamics results of body weight, absolute and daily average, relative increases averaging bulls of Ukrainian black-and-white and Ukrainian red-and-white dairy cattle. Researches are conducted in the conditions of POSP «Napadivske» Kalyinivka district of the Vinnytsya area after materials of primary pedigree account. In an economy use the whole-year of the same type feeding. In the structure of ration 40% make the concentrated sterns and also high-quality silage and soilage. Average daily increases of bulls for period of age to realization for a slaughter made over 1000 grammes. The dynamics of growth of living mass, absolute, average daily and relative increases of bulls, is analysed Ukrainian black-and-white and Ukrainian red-and-white dairy cattle. Living mass and weight gain researches of age to 12-monthly age with an interval in 3 months after the generally accepted methods. Materials of researches are worked out the methods of mathematical statistics with the use of programmatic package of Statistica 8.0. Living mass of bulls of the second group at birth made 36,3 kg, that anymore on 0,8 kg by comparison to new-born bulls of the first group. In all next periods living mass of animals of the second group was greater as compared to the animals of the same age of the first. In 3 months advantage made 1,7 kg, in 6 months – 4,6 kg (P>0,95), in 9 months – 8,8 kg (P>0,95), in 12 months – 12,5 kg (P>0,99). Difference of absolute increases of bulls of the second group above the bulls of the same age of the first of age to to 3-monthly age made 0,8 kg in behalf of animals of the second group. In a period 3-6 months a difference is after this index between the first and second groups made 2,9 kg in behalf of the last. In periods 6-9 and reliable advantage of animals of the second group is 9-12 months set above the bulls of the same age of the first on 4,1 kg (P>0,95) and 3,7 kg (P>0,95) accordingly. In a period of age to 18-monthly age absolute increases of bulls of the second group were greater by comparison to bulls first on 12,5 kg (R>0,99). Average daily increases of bulls of the second group of age to 3-monthly age made 763,0 grammes, that anymore on 8,9 grammes by comparison to bulls of the first group. In periods 3-6 months the average daily increases of animals of the second group prevailed the bulls of the same age of the first on 32,6 grammes. In a period 6-9 months the average daily increases of animals of the second group were made by 1045,9 grammes, that for certain anymore on 45,9 grammes (P>0,95) by comparison to the bulls of the same age of the first. Maximal increases of bulls were in a period 9-12 months and made 1210,4 grammes in the animals of the second group and 1168,9 grammes – for the bulls of the same age of the first, that for certain anymore on 41,5 grammes (P>0,95). In a period of age to 12-monthly age the average daily increases of bulls of the second group were made by 970,6 grammes, that was for certain anymore on 31,8 grammes (R>0,99) by comparison to the bulls of the same age of the first group. Relative increases of bulls of both groups were high. From birth to 3-monthly age greater increases had bulls of the first group – 97,8%, and in periods 3-6, 6-9 and 9-12 months greater were increases of bulls of the same age of the second group – 56,4; 40,1 and 32,4% accordingly. For all probed periods of reliable advantage it is not discovered between the compared groups. It is set researches, that at the identical terms of feeding and maintenance more rapid bulls grow Ukrainian red-and-white dairy cattle. In all age-old periods they prevailed the bulls of the same age of the Ukrainian black-and-white dairy cattle, in a that number, beginning from 9-monthly age, advantage was reliable (P>0,95–0,99). Average daily increases of bulls of two breeds were the least in a period of age to to 3-monthly age – 754,1-763,0 grammes, and most in a period 9-12 months – 1168,9–1210,4 grammes.


2020 ◽  
Vol 13 (3) ◽  
pp. 219-229
Author(s):  
Baocheng Xie ◽  
Jianguo Liu ◽  
Yongqiu Chen

Background: Micro-Electrical Discharge Machining (EDM) milling is widely used in the processing of complex cavities and micro-three-dimensional structures, which is a more effective processing method for micro-precision parts. Thus, more attention has been paid on the micro-EDM milling. Objective : To meet the increasing requirement of machining quality and machining efficiency of micro- EDM milling, the processing devices and processing methods of micro-EDM milling are being improved continuously. Methods: This paper reviews various current representative patents related to the processing devices and processing methods of micro-EDM milling. Results: Through summarizing a large number of patents about processing devices and processing methods of micro-EDM milling, the main problems of current development, such as the strategy of electrode wear compensation and the development trends of processing devices and processing methods of micro-EDM milling are discussed. Conclusion: The optimization of processing devices and processing methods of micro-EDM milling are conducive to solving the problems of processing efficiency and quality. More relevant patents will be invented in the future.


Sign in / Sign up

Export Citation Format

Share Document