Structure and Performance of Ti/TiN/PbO2 Electrodes with Plasma-Sprayed TiN Interlayer

2013 ◽  
Vol 325-326 ◽  
pp. 40-42
Author(s):  
Amin Huang ◽  
Jian Xin Zhang ◽  
Xiao Wen Wu ◽  
Yang Wang
Keyword(s):  
Plasma Spray ◽  
Good Effect ◽  
Catalytic Layer ◽  
Tin Coating ◽  
Electro Deposition ◽  
Reactive Plasma Spray ◽  
Accelerated Life ◽  
Reactive Plasma ◽  
And Performance ◽  
Plasma Sprayed

TiN coating as an interlayer in Ti/TiN/PbO2 electrode and PbO2 catalytic layer were fabricated by reactive plasma spray and electro-deposition, respectively. It is shown that because of good effect of the TiN interlayer, the Ti/TiN/PbO2 electrode exhibits a higher oxygen evolution potential and much improved accelerated life compared with the Ti/PbO2 electrode.

Structure and Properties of Ti/TiN/Sb-SnO2 Electrodes with Plasma Sprayed TiN Interlayer

2012 ◽  
Vol 602-604 ◽  
pp. 1613-1616 ◽  
Author(s):  
Xiao Wen Wu ◽  
Jian Xin Zhang ◽  
Yang Wang ◽  
Amin Huang
Keyword(s):  
Service Life ◽  
Oxygen Evolution ◽  
Plasma Spray ◽  
Sol Gel ◽  
Structure And Properties ◽  
Tin Coating ◽  
Reactive Plasma Spray ◽  
Accelerated Life ◽  
Reactive Plasma ◽  
Plasma Sprayed

In this paper, TiN coating as an interlayer was fabricated on Ti substrate by reactive plasma spray. Ti/TiN/Sb-SnO2 electrodes were prepared by SOL-GEL method and the influence of the TiN interlayer on the structure, oxygen evolution potential and service life of the electrodes was studied. It was shown that the surface of the Ti/TiN/Sb-SnO2 electrodes is more homogeneous and the oxygen evolution potential and accelerated life are both higher than those of the Ti/Sb-SnO2 electrodes.

Study of Reactive Plasma Sprayed TiN Electrocatalytic Carrier Coatings

2011 ◽  
Vol 130-134 ◽  
pp. 950-954
Author(s):  
Li Hua Gao ◽  
Jian Xin Zhang ◽  
Yan Chun Dong ◽  
Yong Yang ◽  
Dian Ran Yan
Keyword(s):  
Steel Substrate ◽  
Tin Coating ◽  
Reactive Plasma Spray ◽  
Ti Oxides ◽  
Accelerated Life ◽  
Spray Method ◽  
Heat Treated ◽  
Reactive Plasma ◽  
Section Structure ◽  
Plasma Sprayed

In this paper TiN coating as an interlayer was fabricated on Q235 steel substrate by reactive plasma spray method and its microstructure and influences on the performance of the Fe/TiN/PO2 electrode were investigated. It is shown that the TiN coating has a rough surface and layered cross-section structure. The coating consists of main TiN phase and a small quantity of Ti oxides. After heat-treated below 550°C the TiN coating is greatly densified due to the increase of Ti oxides, and however the electric resistance of the Fe/TiN samples is still lower than that of the Ti substrate. For the Fe/TiN/PbO2 electrode a rougher surface and more micropores were observed in the active PbO2 coating than on the surface of the Ti/PbO2 electrode. Due to the presence of the TiN interlayer the Fe/TiN/PbO2 electrode shows an accelerated life of 180h under the test condition, which is much longer than 28min of the Ti/PbO2 electrode.

scholarly journals Hardness and microstructure of the nanocrystallined TiN coating by reactive plasma spray

2005 ◽  
Vol 54 (5) ◽  
pp. 2399
Author(s):  
Feng Wen-Ran ◽  
Yan Dian-Ran ◽  
He Ji-Ning ◽  
Chen Guang-Liang ◽  
Gu Wei-Chao ◽  
...  
Keyword(s):  
Plasma Spray ◽  
Tin Coating ◽  
Reactive Plasma Spray ◽  
Reactive Plasma

Reactive Plasma Sprayed TiN Coating and Its Thermal Stability

2007 ◽  
Vol 14 (5) ◽  
pp. 71-75 ◽  
Author(s):  
Dong-li Zou ◽  
Dian-ran Yan ◽  
Ji-ning He ◽  
Xiang-zhi Li ◽  
Yan-chun Dong ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Tin Coating ◽  
Reactive Plasma ◽  
Plasma Sprayed

scholarly journals Spectroscopic Measurement of Plasma in the Reactive Plasma Spray Process

Shinku ◽  
2005 ◽  
Vol 48 (3) ◽  
pp. 241-243 ◽  
Author(s):  
Motohiro YAMADA ◽  
Tatsuya INAMOTO ◽  
Masahiro FUKUMOTO ◽  
Toshiaki YASUI
Keyword(s):  
Plasma Spray ◽  
Spectroscopic Measurement ◽  
Spray Process ◽  
Reactive Plasma Spray ◽  
Plasma Spray Process ◽  
Reactive Plasma

High pressure reactive plasma spray synthesis of titanium nitride based coatings

2000 ◽  
Vol 16 (4) ◽  
pp. 339-343 ◽  
Author(s):  
T. Valente ◽  
F. Carassiti ◽  
M. Suzuki ◽  
M. Tului
Keyword(s):  
High Pressure ◽  
Titanium Nitride ◽  
Plasma Spray ◽  
Reactive Plasma Spray ◽  
Reactive Plasma

scholarly journals Fabrication of Silicon Nitride Coating by Reactive Plasma Spray using Ar, N2, and H2 Mixed Gas.

Shinku ◽  
2003 ◽  
Vol 46 (7) ◽  
pp. 563-566 ◽  
Author(s):  
Motohiro YAMADA ◽  
Masahiro FUKUMOTO ◽  
Toshiaki YASUI
Keyword(s):  
Silicon Nitride ◽  
Plasma Spray ◽  
Nitride Coating ◽  
Mixed Gas ◽  
Reactive Plasma Spray ◽  
Reactive Plasma
Sign in / Sign up

Export Citation Format

Share Document