A Compact Hybrid Sound Absorber Using Flexible Micro-Perforated Panel and Piezoelectric Actuator

2013 ◽  
Vol 325-326 ◽  
pp. 8-11
Author(s):  
Wei Guang Zheng ◽  
Ying Feng Lei ◽  
Qi Bai Huang ◽  
Chuan Bing Li
Keyword(s):  
Hybrid System ◽  
Piezoelectric Actuator ◽  
Sound Absorption ◽  
Low Frequency ◽  
Combined Approach ◽  
High Frequencies ◽  
Sound Absorber ◽  
Vibration Effect ◽  
Piezoelectric Patch ◽  
Absorption Performance

This paper presents the concept of a compact hybrid sound absorber, based on a combined approach for sound absorption. A flexible micro-perforated panel (MPP) is used as the passive sound absorber for mid and high frequencies and a piezoelectric patch as the active control actuator for low frequency. The volume of this new absorber is highly reduced compare to conventional hybrid systems which employ porous layer as passive part and loudspeaker as active part. The vibration effect of the MPP in the hybrid system is also considered. Theoretical and experimental results show that the flexible MPP has the potential to dissipate more energy and can be utilized to improve absorption performance of the hybrid system by appropriately selecting its parameters.

scholarly journals Investigation of Acoustic Properties on Wideband Sound-Absorber Composed of Hollow Perforated Spherical Structure with Extended Tubes and Porous Materials

2020 ◽  
Vol 10 (24) ◽  
pp. 8978
Author(s):  
Dengke Li ◽  
Zhongcheng Jiang ◽  
Lin Li ◽  
Xiaobo Liu ◽  
Xianfeng Wang ◽  
...  
Keyword(s):  
Sound Absorption ◽  
Three Dimensional ◽  
Low Frequency ◽  
Acoustic Properties ◽  
Low Frequencies ◽  
Frequency Sound ◽  
Sound Absorber ◽  
Spherical Structure ◽  
Absorption Performance ◽  
Melamine Foam

Traditional porous media such as melamine foam absorb sound due to their three-dimensional porous struts. However, the acoustic properties at low frequencies are greatly related to its thickness. In this paper, a novel type of thin and lightweight sound absorber composed of melamine foam and hollow perforated spherical structure with extended tubes (HPSET) is introduced to enhance the sound absorption performance at low frequencies. A theoretical model for the normal absorption coefficient of the HPSET with melamine foam is established. Good agreements are observed between the simulated and the experimental results. Compared with the virgin melamine foam, the proposed absorber can greatly improve the low-frequency sound absorption and retain the mid- to high-frequency sound absorption, while the thickness of the proposed absorber is less than 1/28 of the wavelength.

scholarly journals Low Frequency Sound Absorption by Optimal Combination Structure of Porous Metal and Microperforated Panel

2019 ◽  
Vol 9 (7) ◽  
pp. 1507 ◽  
Author(s):  
Xinmin Shen ◽  
Panfeng Bai ◽  
Xiaocui Yang ◽  
Xiaonan Zhang ◽  
Sandy To
Keyword(s):  
Finite Element ◽  
Sound Absorption ◽  
Search Algorithm ◽  
Low Frequency ◽  
Porous Metal ◽  
Cuckoo Search ◽  
Element Model ◽  
Frequency Sound ◽  
Sound Absorber ◽  
Standing Wave Tube

The combination structure of a porous metal and microperforated panel was optimized to develop a low frequency sound absorber. Theoretical models were constructed by the transfer matrix method based on the Johnson—Champoux—Allard model and Maa’s theory. Parameter optimizations of the sound absorbers were conducted by Cuckoo search algorithm. The sound absorption coefficients of the combination structures were verified by finite element simulation and validated by standing wave tube measurement. The experimental data was consistent with the theoretical and simulation data, which proved the efficiency, reliability, and accuracy of the constructed theoretical sound absorption model and finite element model. The actual average sound absorption coefficient of the microperforated panel + cavity + porous metal + cavity sound absorber in the 100–1800 Hz range reached 62.9615% and 73.5923%, respectively, when the limited total thickness was 30 mm and 50 mm. The excellent low frequency sound absorbers obtained can be used in the fields of acoustic environmental protection and industrial noise reduction.

Theoretical and numerical study of nonlinear acoustic absorbers for low frequency noise control

2021 ◽  
Vol 263 (1) ◽  
pp. 5600-5604
Author(s):  
Min Yang ◽  
Xianhui Li ◽  
Zenong Cai ◽  
Junjuan Zhao ◽  
Peng Zhang ◽  
...  
Keyword(s):  
Sound Absorption ◽  
Averaging Method ◽  
Numerical Study ◽  
Structural Parameters ◽  
Low Frequency ◽  
Frequency Noise ◽  
Flow Equations ◽  
State Response ◽  
Runge Kutta Method ◽  
Absorption Performance

In this paper, the sound absorption characteristics of cubic nonlinear sound-absorbing structures are analyzed by theoretical and numerical methods. The slow flow equations of the system are derived by using complexification averaging method, and the nonlinear equations which describe the steady- state response are obtained. The resulting equations are verified by comparing the results which respectively obtained from complexification-averaging method and Runge-Kutta method. It is helpful to optimize the structural parameters and further improve the sound absorption performance to study the variation of the sound absorption performance of cubic nonlinear structure with its structural parameters.

scholarly journals Rating of Sound Absorption for EFBMF Acoustic Panels according to ISO 11654:1997

2018 ◽  
Vol 150 ◽  
pp. 03002 ◽  
Author(s):  
Emedya Murniwaty Samsudin ◽  
Lokman Hakim Ismail ◽  
Aeslina Abd Kadir ◽  
Ida Norfaslia Nasidi ◽  
Noor Sahidah Samsudin
Keyword(s):  
Sound Absorption ◽  
Empty Fruit Bunch ◽  
Initial Thickness ◽  
Reverberation Chamber ◽  
Sound Absorber ◽  
Class A ◽  
Class B ◽  
Absorption Performance

Empty fruit bunch fibre (EFB) and mesocarp fibre (MF) have been used in the fabrication of a new acoustic panel as a sound absorber for building. Measurements were carried out following ISO 354 in the mini reverberation chamber and the sound absorption performance of EFBMF acoustic panels were rated based on ISO 11654. Measurements of the new EFBMF acoustic panel involves five panel designs of 100 EFB dust panels, 80:20 dust panels, 100MF coir panels, 90:10 coir panels and 50:50 coir panels with 5 cm of initial thickness. Results showed that 100MF coir panel achieved αw of 0.90 coefficient and was rated as Class A absorber followed by 90:10 coir panels with αw of 0.85 coefficient and 100 EFB dust, 80:20 dust and 50:50 coir panels having αw of 0.80 coefficients and been rated as Class B absorber. This research has successfully defined that EFB and MF are viable to be used as raw fibre for acoustic absorber for building.

Design of Transformer Substation Low Frequency Sound Absorber and Test Study on Sound Absorption Property

2013 ◽  
Vol 468 ◽  
pp. 134-140 ◽  
Author(s):  
Xia Zhang ◽  
Shu Ning Duan ◽  
Mei Gen Cao ◽  
Juan Mo ◽  
Yu Han Sun ◽  
...  
Keyword(s):  
Sound Absorption ◽  
Low Frequency ◽  
Frequency Noise ◽  
Low Frequency Noise ◽  
Frequency Sound ◽  
Sound Absorber ◽  
Test Study ◽  
Transformer Substation ◽  
Cavity Thickness ◽  
Standing Wave Tube

In allusion to the characteristic that transformer noise is mainly low-frequency noise, firstly the sound absorber is studied and analyzed on aspect of materials, sound absorption structure cavity thickness and punching rate etc in standing wave tube laboratory, secondly transformer substation low-frequency sound absorber is presented, and finally sound absorption properties of absorber is verified through random incidence Test. The analyses and study indicates that: compared with thin plate resonance absorber and micropunching sound absorber, the sound absorption band width of transformer substation low-frequency sound absorber has been improved under unchanged sound absorption effect and transformer low-frequency noise may be effectively absorbed.

scholarly journals Improvement of the sound absorption performance of jute felt-based sound absorbers using micro-perforated panels

2017 ◽  
Vol 36 (4) ◽  
pp. 376-398 ◽  
Author(s):  
Pritesh V Bansod ◽  
T Sai Teja ◽  
Amiya R Mohanty
Keyword(s):  
Transfer Matrix Method ◽  
Sound Absorption ◽  
Low Cost ◽  
Control Engineering ◽  
Natural Materials ◽  
Sound Absorber ◽  
Absorbing Materials ◽  
Different Types ◽  
Absorbing Material ◽  
Absorption Performance

In industrial and architectural applications, noise can be controlled using sound-absorbing materials. Natural materials are now gaining importance in the noise control engineering as they have advantages like low cost, eco-friendly, easy to produce, etc. Jute is one of such natural materials, which can be used as a sound-absorbing material. Micro-perforated panels along with three different types of jute felts are used in a multilayer sound absorber configuration to improve its sound absorption. The sound absorption performance of these multilayer sound absorbers is evaluated by using the transfer matrix method and experimental method. Dependence of sound absorption performance on the placement of micro-perforated panels in a multilayer sound absorber is also studied. It is observed that the sound absorption performance depends on the position of micro-perforated panels in a multilayer sound absorber.

scholarly journals Sound Absorption Performance of Aluminum Silicate Fiber for Noise and Vibration Reduction of Distribution Transformer

2022 ◽  
Vol 2152 (1) ◽  
pp. 012037
Author(s):  
Qunli Chen ◽  
Wengeng Wu ◽  
Xu Gao ◽  
Yibiao Huang ◽  
Xiangwen Chen ◽  
...  
Keyword(s):  
Sound Absorption ◽  
Plate Thickness ◽  
Low Frequency ◽  
Unit Weight ◽  
Aluminum Silicate ◽  
Frequency Noise ◽  
Low Frequency Noise ◽  
Absorption Performance ◽  
Cavity Thickness ◽  
Noise And Vibration Reduction

Abstract In view of the low-frequency noise problem in urban substation, the sound absorption (SA) properties of aluminum silicate fibers (ASF) with different materials, unit weight, plate thickness and cavity thickness were tested in this paper. It was found that the high-purity ASF with larger unit weight, plate thickness and cavity thickness had larger low-frequency SA coefficient, which provided technical support for the development of new low-frequency noise reduction materials for substation.

scholarly journals Modifikasi Permukaan Elemen Peredam Bising Dengan Profil Berbentuk Prisma

2016 ◽  
Vol 6 (01) ◽  
Author(s):  
Hanif Azimut
Keyword(s):  
High Frequency ◽  
Sound Absorption ◽  
Coupling Effect ◽  
Low Frequency ◽  
The Other ◽  
Frequency Range ◽  
Closed Type ◽  
Wave Resonance ◽  
Half Wave ◽  
Absorption Performance

<p class="AbstractText">The influence of surface modification by using prism shaped profile on the sound absorption of absorber element was investigated experimentally. A prime number based configuration of the two types opened and closed type rism shaped profile inclusion was tested by using impedance tube according ASTM E1050 standard. The result shows that sound absorption at low frequency band below 200 Hz increased with the increasing of closed prism number. It is related to the coupling effect between the cavities of the absorber element and the prisms that changes reactance of the coupled structure. In the other side, a half wave resonance like effect occur on the use of opened prisms inclusion, which is increase the sound absorption performance at mid to high frequency range between 800 Hz to 1,25 kHz.  </p>

Sign in / Sign up

Export Citation Format

Share Document