Sound absorption performance of various nickel foam-base multi-layer structures in range of low frequency

2017 ◽  
Vol 27 (9) ◽  
pp. 1989-1995 ◽  
Author(s):  
Wei CHENG ◽  
Cui-yun DUAN ◽  
Pei-sheng LIU ◽  
Miao LU
Keyword(s):  
Sound Absorption ◽  
Nickel Foam ◽  
Low Frequency ◽  
Layer Structures ◽  
Absorption Performance

Theoretical and numerical study of nonlinear acoustic absorbers for low frequency noise control

2021 ◽  
Vol 263 (1) ◽  
pp. 5600-5604
Author(s):  
Min Yang ◽  
Xianhui Li ◽  
Zenong Cai ◽  
Junjuan Zhao ◽  
Peng Zhang ◽  
...  
Keyword(s):  
Sound Absorption ◽  
Averaging Method ◽  
Numerical Study ◽  
Structural Parameters ◽  
Low Frequency ◽  
Frequency Noise ◽  
Flow Equations ◽  
State Response ◽  
Runge Kutta Method ◽  
Absorption Performance

In this paper, the sound absorption characteristics of cubic nonlinear sound-absorbing structures are analyzed by theoretical and numerical methods. The slow flow equations of the system are derived by using complexification averaging method, and the nonlinear equations which describe the steady- state response are obtained. The resulting equations are verified by comparing the results which respectively obtained from complexification-averaging method and Runge-Kutta method. It is helpful to optimize the structural parameters and further improve the sound absorption performance to study the variation of the sound absorption performance of cubic nonlinear structure with its structural parameters.

scholarly journals Sound Absorption Performance of Aluminum Silicate Fiber for Noise and Vibration Reduction of Distribution Transformer

2022 ◽  
Vol 2152 (1) ◽  
pp. 012037
Author(s):  
Qunli Chen ◽  
Wengeng Wu ◽  
Xu Gao ◽  
Yibiao Huang ◽  
Xiangwen Chen ◽  
...  
Keyword(s):  
Sound Absorption ◽  
Plate Thickness ◽  
Low Frequency ◽  
Unit Weight ◽  
Aluminum Silicate ◽  
Frequency Noise ◽  
Low Frequency Noise ◽  
Absorption Performance ◽  
Cavity Thickness ◽  
Noise And Vibration Reduction

Abstract In view of the low-frequency noise problem in urban substation, the sound absorption (SA) properties of aluminum silicate fibers (ASF) with different materials, unit weight, plate thickness and cavity thickness were tested in this paper. It was found that the high-purity ASF with larger unit weight, plate thickness and cavity thickness had larger low-frequency SA coefficient, which provided technical support for the development of new low-frequency noise reduction materials for substation.

scholarly journals Modifikasi Permukaan Elemen Peredam Bising Dengan Profil Berbentuk Prisma

2016 ◽  
Vol 6 (01) ◽  
Author(s):  
Hanif Azimut
Keyword(s):  
High Frequency ◽  
Sound Absorption ◽  
Coupling Effect ◽  
Low Frequency ◽  
The Other ◽  
Frequency Range ◽  
Closed Type ◽  
Wave Resonance ◽  
Half Wave ◽  
Absorption Performance

<p class="AbstractText">The influence of surface modification by using prism shaped profile on the sound absorption of absorber element was investigated experimentally. A prime number based configuration of the two types opened and closed type rism shaped profile inclusion was tested by using impedance tube according ASTM E1050 standard. The result shows that sound absorption at low frequency band below 200 Hz increased with the increasing of closed prism number. It is related to the coupling effect between the cavities of the absorber element and the prisms that changes reactance of the coupled structure. In the other side, a half wave resonance like effect occur on the use of opened prisms inclusion, which is increase the sound absorption performance at mid to high frequency range between 800 Hz to 1,25 kHz.  </p>

scholarly journals Structural Design and Sound Absorption Properties of Nitrile Butadiene Rubber-Polyurethane Foam Composites with Stratified Structure

Polymers ◽  
2018 ◽  
Vol 10 (9) ◽  
pp. 946 ◽  
Author(s):  
Xueliang Jiang ◽  
Zhijie Wang ◽  
Zhen Yang ◽  
Fuqing Zhang ◽  
Feng You ◽  
...  
Keyword(s):  
Polyurethane Foam ◽  
Structural Design ◽  
Sandwich Structure ◽  
Sound Absorption ◽  
Low Frequency ◽  
Thickness Ratio ◽  
Butadiene Rubber ◽  
Absorption Mechanism ◽  
Nitrile Butadiene Rubber ◽  
Absorption Performance

Sound absorbing composites with stratified structures, including double-layer and sandwich structures, were prepared through the combination of nitrile butadiene rubber (NBR) and polyurethane foam (PUFM). The effects of the thickness ratio of layers, different stratified structures and the variety of fillers on the sound absorption performance of the NBR-PUFM composites and the sound absorption mechanism were studied. The results show that the NBR-PUFM composite with a sandwich structure and thickness ratio of 1:8:1 displays good sound absorption, which could be improved further by adding fillers. Because the airflow resistivity, resonance absorption, interface dissipation and interface reflection were combined organically in the sandwich structure, the composites show excellent low-frequency sound absorption performance. Moreover, the composite also has advantages in cost and functionalization aspects.

A Compact Hybrid Sound Absorber Using Flexible Micro-Perforated Panel and Piezoelectric Actuator

2013 ◽  
Vol 325-326 ◽  
pp. 8-11
Author(s):  
Wei Guang Zheng ◽  
Ying Feng Lei ◽  
Qi Bai Huang ◽  
Chuan Bing Li
Keyword(s):  
Hybrid System ◽  
Piezoelectric Actuator ◽  
Sound Absorption ◽  
Low Frequency ◽  
Combined Approach ◽  
High Frequencies ◽  
Sound Absorber ◽  
Vibration Effect ◽  
Piezoelectric Patch ◽  
Absorption Performance

This paper presents the concept of a compact hybrid sound absorber, based on a combined approach for sound absorption. A flexible micro-perforated panel (MPP) is used as the passive sound absorber for mid and high frequencies and a piezoelectric patch as the active control actuator for low frequency. The volume of this new absorber is highly reduced compare to conventional hybrid systems which employ porous layer as passive part and loudspeaker as active part. The vibration effect of the MPP in the hybrid system is also considered. Theoretical and experimental results show that the flexible MPP has the potential to dissipate more energy and can be utilized to improve absorption performance of the hybrid system by appropriately selecting its parameters.

scholarly journals Study of the Sound Absorption Performance of Ethylene-Vinyl Acetate Foam Materials

2019 ◽  
Vol 25 (4) ◽  
pp. 427-432
Author(s):  
Wei GONG ◽  
Yu Long MA ◽  
Da Ming BAN ◽  
Xiao Gang YIN ◽  
Li HE ◽  
...  
Keyword(s):  
Cell Wall ◽  
Absorption Coefficient ◽  
Sound Absorption ◽  
Low Frequency ◽  
Ethylene Vinyl Acetate ◽  
Foam Material ◽  
Pore Filling ◽  
Absorption Effect ◽  
Absorption Performance ◽  
Peak Value

Ethylene-Vinyl Acetate (EVA) polymer foam was prepared using a mold for this investigation. The effect of the cell structure parameters and pore filling gas type on the sound absorption performance of the EVA foam materials were analyzed in terms of their sound absorption capability. The results show that the cell size, cell wall thickness and pore filling gas type have significant influence on the sound absorption performance. When the cell size is 71.3 μm, at low frequency (1000 Hz) the absorption coefficient was the largest at 0.487 and the absorption effect was good. With the increase of the cell wall thickness, the peak value of the sound absorption coefficient first increased and then decreased, and gradually transferred to the low frequency area. When the cell wall thicknesses were 14.3 μm, the foam material had optimal sound absorption properties. The cell filling gas was hydrogen, the EVA foam material had optimal sound absorption effect, and the sound absorption peak value was 0.553 at 800 Hz in the low frequency range (Ⅰ), the sound absorption performance of the foamed materials was ideal.

scholarly journals Preparation and sound absorption properties of barium titanate/nitrile butadiene rubber-polyurethane foam composites with stratified structure

RSC Advances ◽  
2018 ◽  
Vol 8 (37) ◽  
pp. 20968-20975 ◽  
Author(s):  
Xueliang Jiang ◽  
Zhijie Wang ◽  
Zhen Yang ◽  
Fuqing Zhang ◽  
Feng You ◽  
...  
Keyword(s):  
Barium Titanate ◽  
Polyurethane Foam ◽  
Double Layer ◽  
Sound Absorption ◽  
Low Frequency ◽  
Butadiene Rubber ◽  
Absorption Properties ◽  
Frequency Sound ◽  
Pu Foam ◽  
Absorption Performance

BT/NBR-PU foam composites with two different stratified structures including double-layer and alternating multilayered have excellent low-frequency sound absorption performance.

Sign in / Sign up

Export Citation Format

Share Document