DOA Estimation for L-Shaped Array Based on Complex FastICA

2013 ◽  
Vol 333-335 ◽  
pp. 636-639
Author(s):  
Xiao Zhi Liu ◽  
Chen Wang

Combining complex FastICA and L-shaped array DOA (Direction of Arrival) estimation, a new algorithm is proposed. Firstly, the received signal is whitened to reduce the computational load, Secondly, the original signal is restored by the ICA algorithm, Thirdly, the generalized separation matrix is inversed to obtain the estimation of the array manifold. Finally, the estimated steering vector is projected to the ideal L-shaped array to get the final results. This algorithm doesnt need a spectral peak search, What is more, it is able to recover the source signal during the estimation. The formed new algorithm can get faster speed without losing the intrinsic advantage of the original DOA estimation algorithm. Simulation results confirm the validity of the new algorithm.

2015 ◽  
Vol 23 (04) ◽  
pp. 1540007 ◽  
Author(s):  
Guolong Liang ◽  
Wenbin Zhao ◽  
Zhan Fan

Direction of arrival (DOA) estimation is of great interest due to its wide applications in sonar, radar and many other areas. However, the near-field interference is always presented in the received data, which may result in degradation of DOA estimation. An approach which can suppress the near-field interference and preserve the far-field signal desired by using a spatial matrix filter is proposed in this paper and some typical DOA estimation algorithms are adjusted to match the filtered data. Simulation results show that the approach can improve capability of DOA estimation under near-field inference efficiently.


Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4403
Author(s):  
Ji Woong Paik ◽  
Joon-Ho Lee ◽  
Wooyoung Hong

An enhanced smoothed l0-norm algorithm for the passive phased array system, which uses the covariance matrix of the received signal, is proposed in this paper. The SL0 (smoothed l0-norm) algorithm is a fast compressive-sensing-based DOA (direction-of-arrival) estimation algorithm that uses a single snapshot from the received signal. In the conventional SL0 algorithm, there are limitations in the resolution and the DOA estimation performance, since a single sample is used. If multiple snapshots are used, the conventional SL0 algorithm can improve performance in terms of the DOA estimation. In this paper, a covariance-fitting-based SL0 algorithm is proposed to further reduce the number of optimization variables when using multiple snapshots of the received signal. A cost function and a new null-space projection term of the sparse recovery for the proposed scheme are presented. In order to verify the performance of the proposed algorithm, we present the simulation results and the experimental results based on the measured data.


Sensors ◽  
2021 ◽  
Vol 21 (6) ◽  
pp. 2191
Author(s):  
Huichao Yan ◽  
Ting Chen ◽  
Peng Wang ◽  
Linmei Zhang ◽  
Rong Cheng ◽  
...  

Direction of arrival (DOA) estimation has always been a hot topic for researchers. The complex and changeable environment makes it very challenging to estimate the DOA in a small snapshot and strong noise environment. The direction-of-arrival estimation method based on compressed sensing (CS) is a new method proposed in recent years. It has received widespread attention because it can realize the direction-of-arrival estimation under small snapshots. However, this method will cause serious distortion in a strong noise environment. To solve this problem, this paper proposes a DOA estimation algorithm based on the principle of CS and density-based spatial clustering (DBSCAN). First of all, in order to make the estimation accuracy higher, this paper selects a signal reconstruction strategy based on the basis pursuit de-noising (BPDN). In response to the challenge of the selection of regularization parameters in this strategy, the power spectrum entropy is proposed to characterize the noise intensity of the signal, so as to provide reasonable suggestions for the selection of regularization parameters; Then, this paper finds out that the DOA estimation based on the principle of CS will get a denser estimation near the real angle under the condition of small snapshots through analysis, so it is proposed to use a DBSCAN method to process the above data to obtain the final DOA estimate; Finally, calculate the cluster center value of each cluster, the number of clusters is the number of signal sources, and the cluster center value is the final DOA estimate. The proposed method is applied to the simulation experiment and the micro electro mechanical system (MEMS) vector hydrophone lake test experiment, and they are proved that the proposed method can obtain good results of DOA estimation under the conditions of small snapshots and low signal-to-noise ratio (SNR).


Sensors ◽  
2018 ◽  
Vol 18 (9) ◽  
pp. 3043 ◽  
Author(s):  
Weike Zhang ◽  
Xi Chen ◽  
Kaibo Cui ◽  
Tao Xie ◽  
Naichang Yuan

In order to improve the angle measurement performance of a coprime linear array, this paper proposes a novel direction-of-arrival (DOA) estimation algorithm for a coprime linear array based on the multiple invariance estimation of signal parameters via rotational invariance techniques (MI-ESPRIT) and a lookup table method. The proposed algorithm does not require a spatial spectrum search and uses a lookup table to solve ambiguity, which reduces the computational complexity. To fully use the subarray elements, the DOA estimation precision is higher compared with existing algorithms. Moreover, the algorithm avoids the matching error when multiple signals exist by using the relationship between the signal subspace of two subarrays. Simulation results verify the effectiveness of the proposed algorithm.


2013 ◽  
Vol 2013 ◽  
pp. 1-6
Author(s):  
Zhi-Chao Sha ◽  
Zhang-Meng Liu ◽  
Zhi-Tao Huang ◽  
Yi-Yu Zhou

This paper addresses the problem of direction-of-arrival (DOA) estimation of coherent signals in the presence of unknown mutual coupling, and an autoregression (AR) model-based method is proposed. The effects of mutual coupling can be eliminated by the inherent mechanism of the proposed algorithm, so the DOAs can be accurately estimated without any calibration sources. After the mixing matrix is estimated by independent component analysis (ICA), several parameter equations are established upon the mixing matrix. Finally, all DOAs of coherent signals are estimated by solving these equations. Compared with traditional methods, the proposed method has higher angle resolution and estimation accuracy. Simulation results demonstrate the effectiveness of the algorithm.


2015 ◽  
Vol 743 ◽  
pp. 471-473
Author(s):  
C.Z. Sun

To the conformal array antennas, the conventional DOA estimation algorithms will be affected by the Rayleigh limit. While, the MUSIC algorithm can solve this problem, it fully utilizes the orthogonality of noise subspace and signal subspace. It can achieve the DOA estimation through the spectrum peak search. The MUSIC algorithm is analyzed. Based on the cylindrical and conical array antenna, the algorithms are simulated. The simulation results show that the array arrangement mode can exert an important influence on the DOA estimation.


2021 ◽  
Vol 4 (2) ◽  
pp. 23-32
Author(s):  
Fatimah A. Salman ◽  
Bayan M. Sabbar

Sparse array such as the coprime array is one of the most preferable sparse arrays for direction of arrival estimation due to its properties, like simplicity, capability of resolving more sources than the number of elements and resistance to mutual coupling issue.  In this paper, a new coprime array model is proposed to increase the number of degree of freedom (DOF) and improve the performance of coprime array.   The new designed array can avoid the mutual coupling by minimizing the lag redundancy and expand the central lags in the virtual difference co-array. Thus, the propose structure can resolve more sources than the prototype coprime array using the same number of elements with improved direction of arrival estimation. Simulation results demonstrate that the proposed array model is more efficient than the others coprime array model.


2020 ◽  
Vol 10 (13) ◽  
pp. 4420
Author(s):  
Tianxiao Zhao ◽  
Chunbo Luo ◽  
Jianming Zhou ◽  
Dechun Guo ◽  
Ning Chen ◽  
...  

In supporting communications with unmanned aerial vehicles (UAVs) as aerial user equipments (aUEs) in cellular systems, the current beamforming schemes based on channel state estimation are facing severe challenges from the pilot contamination effect, especially in 5G and future networks where the cell size becomes small and the user density is high. Beamforming schemes based on signal direction of arrival (DoA) are regarded as a highly promising alternative to solve this problem. However, to achieve optimal performance for DoA-based beamforming, the error to DoA estimation during pilot signal intervals, caused by the high mobility of UAVs, must be addressed. In the meantime, the training overheads of traditional DoA estimation algorithms must be reduced to save the bandwidth for data communication. This paper investigates uplink beamforming performance enhancement based on signal DoA estimation to support UAV-cellular network communication. We propose a novel DoA estimation algorithm to predict angle variations during the intervals, which achieves high precision even when UAVs are at high mobility. The prediction process requires no pilot signals and enables timely adjustment of the steering vector when calculating the beamforming weight vector. The proposed algorithm contributes to the realisation of a beamforming scheme with real-time steering vector updates, which simultaneously maintains high beamforming gains and low training overheads. Simulation results show that, compared with the conventional DoA-based beamforming scheme, the proposed method yields more accurate DoA estimation output and higher gains. Furthermore, simulation experiments also suggests that applying the proposed scheme can reduce up to 100 pilot signal transmissions per second.


Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5775
Author(s):  
Hyeonjin Chung ◽  
Jeungmin Joo ◽  
Sunwoo Kim

In this paper, an off-grid direction-of-arrival (DoA) estimation algorithm which can work on a non-uniform linear array (NULA) is proposed. The original semidefinite programming (SDP) representation of the atomic norm exploits a summation of one-rank matrices constructed by atoms, where the summation of one-rank matrices equals a Hermitian Toeplitz matrix when using the uniform linear array (ULA). On the other hand, when the antennas in the array are placed arbitrarily, the summation of one-rank matrices is a Hermitian matrix whose diagonal elements are equivalent. Motivated by this property, the proposed algorithm replaces the Hermitian Toeplitz matrix in the original SDP with the constrained Hermitian matrix. Additionally, when the antennas are placed symmetrically, the performance can be enforced by adding extra constraints to the Hermitian matrix. The simulation results show that the proposed algorithm achieves higher estimation accuracy and resolution than other algorithms on both array structures; i.e., the arbitrary array and the symmetric array.


2012 ◽  
Vol 263-266 ◽  
pp. 135-138
Author(s):  
Xue Bing Han ◽  
Zhao Jun Jiang

In this paper, we account for efficient approach of direction-of-arrival estimation based on sparse reconstruction of sensor measurements with an overcomplete basis. MSD-FOCUSS ( MMV Synchronous Descending FOCal Underdetermined System Solver) algorithm is developed against to sparse reconstruction in multiple-measurement-vectors (MMV) system where noise perturbations exist in both the measurements and sensing matrix. The paper shows how sparse-signal model of DOA estimation is established and MSD-FOCUSS is derived, then the simulation results illustrate the advantage of MSD-FOCUSS when it is used to solve the problem of DOA estimation.


Sign in / Sign up

Export Citation Format

Share Document