Model Tests on the Layout of Punning Position in Dynamic Compaction for Loess

2013 ◽  
Vol 405-408 ◽  
pp. 304-309 ◽  
Author(s):  
Jing Cai ◽  
Yong Yu Wang ◽  
Ming Da Luo
Keyword(s):  
Shear Strength ◽  
Soil Samples ◽  
Model Tests ◽  
Dynamic Compaction ◽  
Dry Density ◽  
Test Results ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
Angle Of Internal Friction ◽  
Tamping Energy

To find the influence of the layout of punning position in dynamic compaction for loess, four model tests are performed, which equal in the tamping energy but differ in the layout of punning position. In model tests the settlement, the dry density and the shear strength parameters of the soil samples are measured and analysis of the effects of different test plans is made. The test results manifested that the decrease of the distance between the pounding points might result in an increment of the settlement, the dry density and the cohesive strength but not the angle of internal friction. And from the comparison of the test results, a more efficient layout of punning position is given.

scholarly journals Optimized Analysis Method for Evaluating the Shear Strength Parameters of Rock Joint Surfaces

2020 ◽  
Vol 2020 ◽  
pp. 1-8
Author(s):  
Yao Xiao ◽  
Huafeng Deng ◽  
Jingcheng Fang ◽  
Hengbin Zhang ◽  
Jianlin Li
Keyword(s):  
Shear Strength ◽  
Empirical Equation ◽  
Mechanical Test ◽  
Rock Joint ◽  
Test Results ◽  
Analysis Method ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
Joint Surfaces ◽  
Multiple Sample

The results obtained from the mechanical test of rock samples inevitably suffer dispersion owing to discrepancies between test specimens. In view of these deficiencies, the present study proposes a method based on the empirical equation of shear strength developed by Barton to determine the shear strength parameters of joint surfaces using a single test specimen. This approach is then applied to optimize the analysis of multiple specimens. An analysis of experimental results verifies that the shear strength parameters of joint surfaces obtained by the proposed method can more accurately reflect the shear mechanics of multiple specimens than conventional multiple sample analyses; meanwhile, the results are reasonable and reliable. More importantly, the optimized method ensures the shear strength parameters are no longer affected by the sequence of specimens employed during shear test. The optimized analysis method eliminates the effect of differences between specimens and the influence of subjective factors on test results and therefore provides more realistic evaluations of shear strength parameters.

scholarly journals Estimation of shear strength parameters of soil using Optimized Inference Intelligence System

2021 ◽  
Vol 43 (2) ◽  
Author(s):  
Binh Thai Pham ◽  
Mahdis Amiri ◽  
Manh Duc Nguyen ◽  
Trinh Quoc Ngo ◽  
Kien Trung Nguyen ◽  
...  
Keyword(s):  
Shear Strength ◽  
Internal Friction ◽  
Physical Parameters ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
Inference System ◽  
Angle Of Internal Friction ◽  
Intelligence System ◽  
Statistical Measures ◽  
Model Study

In recent years, machine learning techniques have been developed and used to build intelligent information systems for solving problems in various fields. In this study, we have used Optimized Inference Intelligence System namely ANFIS-PSO which is a combination of Adaptive Neural-Fuzzy Inference System (ANFIS) and Particle Swarm Optimization (PSO) for the estimation of shear strength parameters of the soils (Cohesion “C” and angle of internal friction “φ”). These parameters are required for designing the foundation of civil engineering structures. Normally, shear parameters of soil are determined either in the field or in the laboratory which require time, expertise and equipments. Therefore, in this study, we have applied a hybrid model ANFIS-PSO for quick and cost-effective estimation of shear parameters of soil based on the other six physical parameters namely clay content, natural water content, specific gravity, void ratio, liquid limit and plastic limit. In the model study, we have used data of 1252 soft soil samples collected from the different highway project sites of Vietnam. The data was randomly divided into 70:30 ratios for the model training and testing, respectively. Standard statistical measures: Root Mean Square Error (RMSE), Mean Absolute Error (MAE) and Correlation Coefficient (R) were used for the performance evaluation of the model. Results of the model study indicated that performance of the ANFIS-PSO model is very good in predicting shear parameters of the soil: cohesion (RMSE = 0.075, MAE = 0.041, and R = 0.831) and angle of internal friction (RMSE = 0.08, MAE = 0.058, and R = 0.952).

Reliability of Shear-Box Tests Upon Soaking Process on the Sand Soil in Al-Najaf City

2020 ◽  
Vol 857 ◽  
pp. 212-220
Author(s):  
Mohammed Sh. Mahmood ◽  
Waseem H. Al-Baghdadi ◽  
Asaad M. Rabee ◽  
Suhad H. Almahbobi
Keyword(s):  
Shear Strength ◽  
Internal Friction ◽  
Sandy Soil ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
Engineering Structures ◽  
Angle Of Internal Friction ◽  
Shear Box ◽  
Testing Condition ◽  
Direct Shear Apparatus

Accurate prediction of the soil shear strength parameters is essential in the reliable geotechnical design of civil engineering structures. This recent paper investigates the effect of the dry testing condition on the shear strength parameters of the sandy soil using the direct shear apparatus and compared with the saturated condition tests in previous researches on the same soil. The dry soil, usually above the water table, is the principal condition of the Al-Najaf city soil in Iraq. Samples are selected from the site of the University of Kufa, which represents the sandy soil of the city. For reliability purposes, the soil is exposed to different pre-soaking durations (one, two, and four weeks) then air-dried for shear tests. The main results revealed that the angle of internal friction (Φ) tested as a dry sample decreases about -6% up to two-weeks soaking then recovered upon four-week soaking about +6%. Compared to the saturated testing, there are increases in F between 6%-17% from saturated tests. Finally, it is recommended to aware in the selection of testing conditions for calculations of the angle of internal friction.

scholarly journals The Influence of Compaction and Water Conditions on Shear Strength and Friction Resistance between Geotextiles and Ash-Slag Mixture

Energies ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1086
Author(s):  
Andrzej Gruchot ◽  
Tymoteusz Zydroń ◽  
Agata Michalska
Keyword(s):  
Shear Strength ◽  
Internal Friction ◽  
Water Saturation ◽  
Friction Angle ◽  
Interaction Coefficient ◽  
Interfacial Friction ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
Angle Of Internal Friction ◽  
Friction Resistance

The paper presents the results of tests of the shear strength of the ash–slag mixture taken from the landfill located in Kraków (Poland) and the interfacial friction resistance at the contact between the ash–slag mixture and woven or nonwoven geotextiles. The tests were carried out in a direct shear apparatus on samples with and without water saturation. The samples for testing were formed in the apparatus box at the optimum moisture by compacting them to IS = 0.90 and 1.00. The test results reveal that the shear strength parameters of the ash-slag mixture were large. It was stated the significant influence of the compaction, the growth of which has resulted in an increase in the angle of internal friction (from 7% to 9%) and cohesion (from 60% to 97%). Whereas the saturation of the samples reduced the shear strength parameters (from 4% to 6%, of the internal friction angle and 30% to 43% of cohesion). The values of the interfacial friction resistance at the contact between the ash–slag mixture and the geotextiles were large as well, but slightly smaller than the values of the shear strength parameters of the mixture itself. The compaction caused an increase in the angle of interfacial friction (from 1% to 5%) and adhesion (from 31% to 127%). The water-saturation of the samples caused a change in the angle of interfacial friction (from −6% to 3%) and decline in the adhesion (from 22% to 69%). Values of the interaction coefficient were about 0.8–1.0 and they tended to rise with increasing the normal stress. Higher values of this parameter were obtained in tests with water saturation and for non-woven geotextiles.

scholarly journals Estimation of shear strength parameters of soil using Optimized Inference Intelligence System

2021 ◽  
Vol 43 (2) ◽  
pp. 189-198
Author(s):  
Binh Thai Pham ◽  
Mahdis Amiri ◽  
Manh Duc Nguyen ◽  
Trinh Quoc Ngo ◽  
Kien Trung Nguyen ◽  
...  
Keyword(s):  
Shear Strength ◽  
Internal Friction ◽  
Physical Parameters ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
Inference System ◽  
Angle Of Internal Friction ◽  
Intelligence System ◽  
Statistical Measures ◽  
Model Study

In recent years, machine learning techniques have been developed and used to build intelligent information systems for solving problems in various fields. In this study, we have used Optimized Inference Intelligence System namely ANFIS-PSO which is a combination of Adaptive Neural-Fuzzy Inference System (ANFIS) and Particle Swarm Optimization (PSO) for the estimation of shear strength parameters of the soils (Cohesion “C” and angle of internal friction “φ”). These parameters are required for designing the foundation of civil engineering structures. Normally, shear parameters of soil are determined either in the field or in the laboratory which require time, expertise and equipments. Therefore, in this study, we have applied a hybrid model ANFIS-PSO for quick and cost-effective estimation of shear parameters of soil based on the other six physical parameters namely clay content, natural water content, specific gravity, void ratio, liquid limit and plastic limit. In the model study, we have used data of 1252 soft soil samples collected from the different highway project sites of Vietnam. The data was randomly divided into 70:30 ratios for the model training and testing, respectively. Standard statistical measures: Root Mean Square Error (RMSE), Mean Absolute Error (MAE) and Correlation Coefficient (R) were used for the performance evaluation of the model. Results of the model study indicated that performance of the ANFIS-PSO model is very good in predicting shear parameters of the soil: cohesion (RMSE = 0.075, MAE = 0.041, and R = 0.831) and angle of internal friction (RMSE = 0.08, MAE = 0.058, and R = 0.952).

Study on Shear Strength Experiments Base on the Modified Direct Shear Apparatus for Unsaturated Soils

2013 ◽  
Vol 438-439 ◽  
pp. 1176-1180 ◽  
Author(s):  
Gao Feng Chen ◽  
Ying Fa Lv ◽  
Zhi Huai Huang ◽  
Yan Chang
Keyword(s):  
Shear Strength ◽  
Internal Friction ◽  
Moisture Content ◽  
Friction Angle ◽  
Soil Samples ◽  
Direct Shear ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
General Internal ◽  
Direct Shear Apparatus

The unconsolidated-undrained fast shear tests of saturated-unsaturated remolded soil samples under different moisture content which is 1.1%, 10.1%, 14.9%, 19.9%, 24.2%, 29.9%, 37.7% respectively, and normal stress which is 50kPa, 100kPa, 200kPa, 300kPa, 400kPa respectively, were studied by the modified SDJ-1-type strain direct shear apparatus and U.S. Lab VIEW data acquisition system. The shear strength parameters of unsaturated soil samples, i.e. general cohesion and general internal friction angle were obtained based on Mohr-Coulomb strength theory. The test results showed that the general cohesion firstly increased and then reduced with the moisture content increasing, and the general internal friction angle increased with the moisture content decreasing. The function between the general shear strength parameters and the moisture content was studied. The concept of general shear strength parameters was proposed in the paper, and would provide a simple and practical method to obtain the strength parameters for engineering practice.

scholarly journals Effect of Soaking and Non-soaking Condition on Shear Strength Parameters of Sandy Soil Treated with Additives

2019 ◽  
Vol 5 (5) ◽  
pp. 1147-1161
Author(s):  
Roaa M. Fadhil ◽  
Haifaa A. Ali
Keyword(s):  
Shear Strength ◽  
Internal Friction ◽  
Sandy Soil ◽  
Dry Weight ◽  
Natural State ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
Angle Of Internal Friction ◽  
Direct Shear Tests ◽  
Before And After

The present paper aims to improve shear strength parameters: cohesion (c), and angle of internal friction (∅) for sandy soil treated by additives before and after soaking. The samples of sandy soil were obtained from Karbala city and then classified as poorly graded sand (SP) with relative density Dr (30%) according to the system of (USCS). The experiment has three stages. In the first stage ,the soil was treated with three different  percentages of cement (3 ,5 and 7%) of dry weight for the soil with three different percentages of water content (2, 4 and 8%) in each above percentage of cement, while the second stage includes (2%) of lime  from  soil weight  mixed with each different percentage of cement . In the third stage, (50%) of polymer of cement weight was mixed with each different percentage of cement. An analysis of behavior sandy soils treated by additives was carried out with the Direct Shear Tests. All the samples were cured (3) days before and after soaking. The results of the experiment showed that increase in shear strength parameters of sandy soil; especially the angle of internal friction with the rate value (16.6 %) of cement only, (21.88 %) of cement with lime , (20.3%) of cement with the polymer before soaked condition. After soaking condition, it was increased with the rate value (14.3%) with cement only, (23.57%) of cement with lime, and (15.38%) of cement with the polymer as compared with soil in the natural state.

Effect of Sample Size on TDA Shear Strength Parameters in Direct Shear Tests

2020 ◽  
Vol 2674 (9) ◽  
pp. 1110-1119 ◽  
Author(s):  
Khaled Zahran ◽  
Hany El Naggar
Keyword(s):  
Shear Strength ◽  
Shear Test ◽  
Direct Shear ◽  
Shear Strength Parameters ◽  
Shear Tests ◽  
Strength Parameters ◽  
Angle Of Internal Friction ◽  
Direct Shear Tests ◽  
Shear Box ◽  
Box Dimensions

Tire-derived aggregate (TDA), a relatively new construction material, has been gaining acceptance as a backfill material for embankments, trenches, and earth-retaining structures because of its lightweight and excellent geotechnical properties. Type A TDA has a basic geometric shape, with particles approximately 12 to 100 mm in size. As a result of the simplicity and accuracy of the direct shear test, most laboratories choose this test in preference to more complex tests. However, TDA requires large-scale direct shear apparatus because of the consistently large size of its particles, and few facilities own this type of apparatus. Depending on the shear box dimensions, the aspect ratio of the particle size to the box dimensions may lead to variations in the shear strength results of the sample being evaluated. This research focuses on studying the effect of TDA sample size on the shear strength results of direct shear tests by using five different shear box sizes. The findings show that the angle of internal friction increases slightly as the dimensions of the shear box decrease. It was found that the maximum variation in the angle of internal friction and the cohesion results of the different shear boxes was only 1.9° and 2.4 kPa, respectively. These differences should be taken into consideration when TDA shear test results are used in the geotechnical design. It is recommended that a shear box with an aspect ratio (W/Dmax) greater than or equal to 4 should be used when evaluating the shear strength parameters of TDA.

Effect of Grain Size and Specimen Dimension on Triaxial Shear Strength Parameters of Coarse Soil

2014 ◽  
Vol 926-930 ◽  
pp. 557-560
Author(s):  
Saman Asreazad
Keyword(s):  
Grain Size ◽  
Shear Strength ◽  
Triaxial Test ◽  
Coarse Aggregate ◽  
Triaxial Testing ◽  
Test Results ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
Lower Shear ◽  
Coarse Soil

The triaxial shear strength of two specimen sizes of poorly-graded gravelly sand mixtures (SF) after removing a portion of the coarse aggregate by method called scalped gradation was investigated. The lower shear strength parameters obtained from small specimens for coarse soils in triaxial testing can lead to uneconomic design. In order to reduce testing costs and utilize more economic designs for coarse soils, small specimens can be used instead of large specimens; in addition, the test results can be corrected. The correlation of the triaxial test results of the two different size specimens was evaluated in this paper.

Sign in / Sign up

Export Citation Format

Share Document