Studies on Tensile and Water Absorption Properties on Kenaf (Hibiscus Cannabinus) Fibre Mat/Polyester Composite Using Chemical Treatment

2013 ◽  
Vol 421 ◽  
pp. 290-295
Author(s):  
Mohammad Taib Mohamad Nurul Azman ◽  
Abu Kassim Masitah ◽  
Ariff Jamaludin Mohd ◽  
Ismail Tayibbah
Keyword(s):  
Water Absorption ◽  
Treatment Duration ◽  
Hibiscus Cannabinus ◽  
Absorption Test ◽  
Duration Of Treatment ◽  
Absorption Properties ◽  
Kenaf Fibre ◽  
Polyester Composite ◽  
Water Absorption Test ◽  
Polyester Composites

This research investigated the tensile and water absorption properties of kenaf fibre mat/polyester composites. Treatment using acetylation method has been introduced to improve the properties of product manufactured. The effects of acetylation treatment with three variations of time that were 1, 4 and 24 hours on the kenaf fibre mats were investigated. The MOE of the tensile of treated fibre mat/polyester composite for 1 hour was the highest with value 4589.61 MPa. The tensile strength of treated fibre mat/polyester composite for 4 hours was the highest with value 0.6213 MPa. For water absorption test, the results showed that fibre mat/polyester composite with treatment duration for 1 hour had the lowest water absorption that was 1.23% compared with treatment duration for 4 hours and 24 hours. For overall it can be concluded that the treatment duration of 1 hour was recommended for acetylation method when compared with 4 hours and 24 hours duration treatments. Using acetylation treatment on the kenaf fibre mat/polyester composites was showed improvement on composite and was recommended in short duration of treatment.

scholarly journals CHARACTERISTICS OF PHYSICAL PROPERTIES OF WOOD POWDER COMPOSITES AND BAGASSEAS CONSTRUCTION MATERIALS OF SHIP

2019 ◽  
Vol 5 (1) ◽  
Author(s):  
Ersti Yulika Sari ◽  
Polaris Nasution ◽  
Fajri Ramdhan1
Keyword(s):  
Physical Properties ◽  
Water Absorption ◽  
Construction Materials ◽  
Absorption Test ◽  
Wood Powder ◽  
Powder Composites ◽  
Density Values ◽  
Water Absorption Test ◽  
Composite Wood

Parameters for measuring the physical properties on this research are divided into three elements, including measurement of weight, water absorption, and density. This research was conducted from January to March 2018 to determine the physical properties of wood powder composites and bagasse. The manufacturing and testing process refers to the ASTM and JIS standards. Weight and density testing refer to the ASTM D 792 standard while the water absorption test refers to the JIS A5908 standard. The results showed that the density of wood powder was 0.4175 gr / cm3, and the bagasse was 0.3125 gr / cm3. Then, fiber absorption in units of volume to water and resin were 16.88% and 13.75% respectively. The results showed that the largest water absorption was found in composite wood powder 60% and bagasse 40%, which was 13.47%, and for the highest density values found in wood powder composites as much as 80% or 1,078.29 kg / m3

Perbandingan Karakteristik Plastik Biodegradable dari Biji Durian menggunakan Filler Kalsium Silikat dan Kalsium Karbonat

2021 ◽  
Vol 5 (1) ◽  
pp. 22
Author(s):  
S. Sigit Udjiana ◽  
Sigit Hadiantoro ◽  
Noor Isnaini Azkiya
Keyword(s):  
Calcium Carbonate ◽  
Water Absorption ◽  
Calcium Silicate ◽  
Smooth Surface ◽  
Biodegradable Plastics ◽  
Test Results ◽  
Absorption Properties ◽  
Water Absorption Test ◽  
Carbonate Filler ◽  
Durian Seed

Pada penelitian ini biji durian digunakan sebagai sumber pati dalam pembuatan plastik biodegradable. Penelitian ini bertujuan untuk mengetahui pengaruh jenis dan jumlah filler terhadap sifat biodegradable, sifat mekanik dan sifat water absorbtion pada plastik biodegradable berbasis pati biji buah durian. Plasticizer yang digunakan dalam penelitian ini adalah sorbitol  40%, sedangkan filler yang digunakan adalah Kalsium silikat (Ca2SiO4) dan Kalsium karbonat (CaCO3) dengan variable konsentrasi 2%, 4%, 6%, dan 8%. Dari hasil penelitian, diperoleh % yield dari pati biji buah durian sebesar 34,57%. Hasil dari plastik biodegradable terbaik dengan karakteristik transparan, tidak ada gelembung, lentur serta permukaan yang halus diperoleh pada variabel penambahan filler kalsium karbonat 4%. Hasil uji bio-degradasi paling mendekati standard ASTM D6400 diperoleh pada variabel kalsium karbonat 2%. Pada Uji water absorption hasil terbaik dicapai pada variabel kalsium silikat 8%. Uji tarik hasil terbaik diperoleh pada variabel kalsium silikat 6%.In this study, durian seeds were used as a source of starch in making biodegradable plastics. This study aims to determine the effect of the type and amount of filler on biodegradable properties, mechanical properties, and water absorption properties of biodegradable plastics based on durian fruit starch. The plasticizer used in this study was sorbitol 40%, while the filler used was Calcium silicate (Ca2SiO4) and Calcium carbonate (CaCO3) with variable concentrations of 2%, 4%, 6%, and 8%.. From the research results, the% yield of durian seed starch was 34.57%. The results of the best biodegradable plastic with the characteristics of transparent, no bubbles, flexible and smooth surface were obtained with the addition of 4% calcium carbonate filler variables. The bio-degradation test results closest to the ASTM D6400 standard were obtained in the 2% calcium carbonate variable. In the water absorption test, the best results were achieved at the 8% calcium silicate variable. The best tensile test results were obtained in the 6% calcium silicate variable.

scholarly journals Influence of nanoclays on water uptake and flexural strength of glass–polyester composites

2020 ◽  
Vol 18 ◽  
pp. 228080002093018
Author(s):  
Ali Nemati Giv ◽  
Sina Rastegar ◽  
Mutlu Özcan
Keyword(s):  
Flexural Strength ◽  
Water Absorption ◽  
High Strength ◽  
Time Duration ◽  
Sem Images ◽  
Water Absorption Test ◽  
Polyester Composites ◽  
Chopped Strand Mat ◽  
Nanoclay Content ◽  
Composite Samples

Fiber-reinforced polyester composites have received significant attention in a variety of applications due to their considerable potential due to such characteristics as high strength, stiffness, and modulus. However, one of the most important concerns about polymeric composites is their sensitivity to moisture attack. This work has been conducted to investigate the effects of nanoclay addition on reinforcing glass/polyester composites against water absorption and the resultant deterioration of flexural strength. Therefore, chopped strand mat and woven fiberglass polyester specimens were fabricated by using the hand lay-up technique with varying weight percentages of Cloisite 20A nanoclays (0, 1.5, and 3 wt%) and immersion in water for a time duration of 21 days. The specimens were weighed for the water absorption test. The results showed a remarkable drop in water absorption of the composite samples with the increase of nanoclay content. Moreover, although all the pure and nanocomposite specimens underwent degradation in flexural strength due to the water absorption, the strength was found to significantly increase with increasing the percentage of nanoclay at all immersion periods. The experimental results were confirmed by scanning electron microscopy (SEM). SEM images indicated that the presence of nanoclay protected the fiber/matrix interfaces.

scholarly journals Karakteristik Sifat Mekanik Wadah Makanan dari Limbah Daun Pisang Kering

2021 ◽  
Vol 6 (1) ◽  
pp. 27-34
Author(s):  
Zilmi Azyurah Rahman ◽  
Hernawati Hernawati ◽  
Ayusari Wahyuni
Keyword(s):  
Water Absorption ◽  
Absorption Test ◽  
Steel Mold ◽  
Physical Quality ◽  
Large Plate ◽  
Average Value ◽  
Water Absorption Test ◽  
Quality Of Food ◽  
Food Media

The objective of this research is to determine the physical quality of food media, consisting of small plate, large plate and small bowl. The method used of this research is testing the water absorption and resistance of the food media’s temperature. The process of making a food media using a stainless steel mold which is heated using a food thermometer with 100   and a load of 10 kg as a pressure, then it is printed for 5 minutes with 4 times taking the data for each food media. There are two testing of food media, the first test is water absorption with 29.5  for 125 miles into a small plate, 200 miles into a small bowl and 250 miles into a large plate for 60 minutes, the average value of the water absorption test for the Non-woven food media consists of three forms food medias have 0.00  as the same result, meanwhile woven media such as small plate has 65.00 , large plate has 44.83 and small bowl has 66.68 .  Second test is resistance of the food medias based on temperature parameters. The temperatures used were 40, 60, 80 for non-woven food media consists of three forms food media which had few change after drying, while for woven food media consists three forms of food media had the same results, that is seepage (leaking) in the food media.

Sign in / Sign up

Export Citation Format

Share Document