Study of the On-Line Monitoring on the Effect of Laser Shock Processing for Residual Stress by the Properties of Acoustic Wave

2010 ◽  
Vol 44-47 ◽  
pp. 680-687
Author(s):  
Yang Li ◽  
Hai Yong Qin
Keyword(s):  
Residual Stress ◽  
Acoustic Wave ◽  
Acoustic Waves ◽  
Least Square Method ◽  
Correlation Equation ◽  
Least Square ◽  
Laser Shock ◽  
Laser Shock Processing ◽  
On Line ◽  
Shock Processing

In order to realize the on-line monitoring of the effect of laser shock processing(LSP),acoustic waves generated during the LSP of 45 steel are measured in real time by a wide-band microphone and digitized at a sampling frequency of 48KHz.The waveforms of the received acoustic signal imported to MATLAB are analyzed and in order to investigate the frequency characteristic of the acoustic wave, a power spectral density(PSD) analysis has been carried out. Based on the value of the largest peak of the PSD and compressive residual stress of metal materials induced by the laser shock processing, the correlation equation was established with the application of least square method for the on-line monitoring.

Influence of Laser Shock Processing on the Weld Line and Finite Element Simulation

2011 ◽  
Vol 464 ◽  
pp. 627-631
Author(s):  
Jie Zhang ◽  
Ai Hua Sun ◽  
Le Zhu ◽  
Xiang Gu
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Welding Residual Stress ◽  
Laser Shock ◽  
Analysis Software ◽  
Laser Shock Processing ◽  
Element Analysis ◽  
Welding Line ◽  
Simulation Results ◽  
Shock Processing

Welding residual stress is one of the main factors that affect the strength and life of components. In order to explore the effect on residual stress of welding line by laser shock processing, finite element analysis software ANSYS is used to simulate the welding process, to calculate the distribution of welding residual stress field. On this basis, then AYSYS/LS-DYNA is used to simulate the laser shock processing on welding line. Simulation results show that residual stress distributions of weld region, heat-affected region and matrix by laser shock processing are clearly improved, and the tensile stress of weld region effectively reduce or eliminate. The simulation results and experimental results are generally consistent, it offer reasons for parameter optimization of welding and laser shock processing by finite element analysis software.

High Dense Compressive Residual Stress Produced in Laser Shock Processing on Ti6Al4V Alloys

2007 ◽  
Vol 353-358 ◽  
pp. 1617-1620 ◽  
Author(s):  
Xu Dong Ren ◽  
Yong Kang Zhang ◽  
Jian Zhong Zhou ◽  
Yong Yu Gu ◽  
Y.Y. Xu ◽  
...  
Keyword(s):  
Residual Stress ◽  
Fatigue Crack ◽  
Surface Stress ◽  
Compressive Residual Stress ◽  
High Energy ◽  
Laser Shock ◽  
Laser Shock Processing ◽  
Large Spot ◽  
Small Spot ◽  
Shock Processing

Laser shock processing (LSP) employs high-energy laser pulses from a solid-state laser system to create intense shock waves into a material, which can induce compressive residual stresses in the target surface and improve its mechanical property efficiency. Residual stress of Ti6Al4V alloy both before and after LSP with multishocks was analysised. The depth of compressive residual stress was found to have a dependence on the number of shocking layers and a slight dependence on the level of irradiance. Surface stress improvements of more than 50% increases are possible after laser shock processing with either large spot or small spot patterns. The large spot gave a surface stress of 432MPa and a depth of over 1mm. The low intensity small spot gave a surface stress of 285MPa with a depth comparable to the large spot. Laser shock processing induces a compressive residual stress field, which increases fatigue crack initiation life and reduces fatigue crack growth rate.

Effect of 7050 Aluminium Alloy Microstructure on Residual Stress by Laser Shock Processing

2012 ◽  
Vol 463-464 ◽  
pp. 1363-1367
Author(s):  
M.L. Zhang ◽  
J.M. Wang ◽  
Y.F. Jiang ◽  
Q.L. Zhang ◽  
Q.L. Zhou
Keyword(s):  
Residual Stress ◽  
Aluminium Alloy ◽  
Compressive Stress ◽  
Solution Treatment ◽  
Aging Treatment ◽  
Residual Compressive Stress ◽  
Original Structure ◽  
Laser Shock ◽  
Laser Shock Processing ◽  
Shock Processing

The solution treatment and solution and aging treatment (T6) were disposed on 7050 aluminium alloy, then local processed by laser shock processing (LSP) with high-rate neodymium glass laser. The microhardness and residual stress on the surface of 7050 aluminium alloy were tested, then how the microstructure influences the residual stress on the surface of 7050 aluminium alloy by laser shock processing was analysed. The results show that the microhardness and residual compressive stress on the surface of 7050 aluminium alloy treated by solution and aging treatment was higher, and decreased obviously treated by solution treatment; the microhardness and residual compressive stress on the surface of 7050 aluminium alloy increased obviously by solution treatment and solution and aging treatment after laser shock processing; treated by solution treatment and solution and aging treatment, the microhardness and residual compressive stress of the material with uniform original structure was higher than the material with nonuniform original structure.

Parameters Analysis of Residual Stress Induced by Laser Shock Processing

2010 ◽  
Vol 37 (10) ◽  
pp. 2632-2637 ◽  
Author(s):  
吴先前 Wu Xianqian ◽  
黄晨光 Huang Chenguang ◽  
宋宏伟 Song Hongwei
Keyword(s):  
Residual Stress ◽  
Laser Shock ◽  
Laser Shock Processing ◽  
Parameters Analysis ◽  
Shock Processing

Experimental Study of Residual Stress Formation Mechanism of 7050 Aluminum Alloy Sheet by Laser Shock Processing

2016 ◽  
Vol 43 (7) ◽  
pp. 0702008
Author(s):  
曹宇鹏 Cao Yupeng ◽  
徐影 Xu Ying ◽  
冯爱新 Feng Aixin ◽  
花国然 Hua Guoran ◽  
周东呈 Zhou Dongcheng ◽  
...  
Keyword(s):  
Residual Stress ◽  
Experimental Study ◽  
Aluminum Alloy ◽  
Alloy Sheet ◽  
Laser Shock ◽  
Aluminum Alloy Sheet ◽  
Laser Shock Processing ◽  
7050 Aluminum Alloy ◽  
Stress Formation ◽  
Shock Processing

Laser Shock Processing of Titanium Alloy Blade and FEM Simulation

2013 ◽  
Vol 456 ◽  
pp. 125-128
Author(s):  
Bing Yan ◽  
Rui Wang
Keyword(s):  
Residual Stress ◽  
Titanium Alloy ◽  
Residual Stresses ◽  
Fem Simulation ◽  
Laser Shock ◽  
Laser Shock Processing ◽  
Tc4 Titanium Alloy ◽  
Compressive Stresses ◽  
Maximum Value ◽  
Shock Processing

The aim of this article is to analyze the residual stresses field in a TC4 titanium alloy blade by laser shock processing (LSP).LSP is a new surface processing technology, it uses the laser shock wave to act on the surface of the target and form residual compressive stresses field. The ABAQUS software is applied to simulate the LSP of TC4 titanium alloy blade, and the distributions of the residual stresses field are analysed.After single LSP,the maximum value of residual stress on the surface is 309 MPa.The residual stresses on the surface increase first and then decrease.The residual stresses at the depth continue decreasing with the increase of the depth.After multiple LSP,the maximum value of residual stress on the surface is increased and plastically affected depth is increased.

Sign in / Sign up

Export Citation Format

Share Document