Research on Particle Swarm Optimization Least Square Support Vector Machine for Short-Term Wind Speed Prediction

2014 ◽  
Vol 511-512 ◽  
pp. 927-930
Author(s):  
Shuai Zhang ◽  
Hai Rui Wang ◽  
Jin Huang ◽  
He Liu
Keyword(s):  
Support Vector Machine ◽  
Particle Swarm Optimization ◽  
Wind Speed ◽  
Particle Swarm ◽  
Least Square ◽  
Support Vector ◽  
Short Term ◽  
Swarm Optimization ◽  
Wind Speed Prediction ◽  
Speed Prediction

In the paper, the forecast problems of wind speed are considered. In order to enhance the redaction accuracy of the wind speed, this article is about a research on particle swarm optimization least square support vector machine for short-term wind speed prediction (PSO-LS-SVM). Firstly, the prediction models are built by using least square support vector machine based on particle swarm optimization, this model is used to predict the wind speed next 48 hours. In order to further improve the prediction accuracy, on this basis, introduction of the offset optimization method. Finally large amount of experiments and measurement data comparison compensation verify the effectiveness and feasibility of the research on particle swarm optimization least square support vector machine for short-term wind speed prediction, Thereby reducing the short-term wind speed prediction error, very broad application prospects.

An application of backtracking search optimization–based least squares support vector machine for prediction of short-term wind speed

2019 ◽  
Vol 44 (3) ◽  
pp. 266-281 ◽  
Author(s):  
Zhongda Tian ◽  
Yi Ren ◽  
Gang Wang
Keyword(s):  
Support Vector Machine ◽  
Wind Speed ◽  
Prediction Model ◽  
Least Squares ◽  
Support Vector ◽  
Short Term ◽  
Backtracking Search ◽  
Wind Speed Prediction ◽  
Search Optimization ◽  
Speed Prediction

Wind speed prediction is an important technology in the wind power field; however, because of their chaotic nature, predicting wind speed accurately is difficult. Aims at this challenge, a backtracking search optimization–based least squares support vector machine model is proposed for short-term wind speed prediction. In this article, the least squares support vector machine is chosen as the short-term wind speed prediction model and backtracking search optimization algorithm is used to optimize the important parameters which influence the least squares support vector machine regression model. Furthermore, the optimal parameters of the model are obtained, and the short-term wind speed prediction model of least squares support vector machine is established through parameter optimization. For time-varying systems similar to short-term wind speed time series, a model updating method based on prediction error accuracy combined with sliding window strategy is proposed. When the prediction model does not match the actual short-term wind model, least squares support vector machine trains and re-establishes. This model updating method avoids the mismatch problem between prediction model and actual wind speed data. The actual collected short-term wind speed time series is used as the research object. Multi-step prediction simulation of short-term wind speed is carried out. The simulation results show that backtracking search optimization algorithm–based least squares support vector machine model has higher prediction accuracy and reliability for the short-term wind speed. At the same time, the prediction performance indicators are also improved. The prediction result is that root mean square error is 0.1248, mean absolute error is 0.1374, mean absolute percentile error is 0.1589% and R2 is 0.9648. When the short-term wind speed varies from 0 to 4 m/s, the average value of absolute prediction error is 0.1113 m/s, and average value of absolute relative prediction error is 8.7111%. The proposed prediction model in this article has high engineering application value.

scholarly journals Short-term power load forecasting based on support vector machine and particle swarm optimization

2018 ◽  
Vol 13 ◽  
pp. 174830181879706 ◽  
Author(s):  
Song Qiang ◽  
Yang Pu
Keyword(s):  
Support Vector Machine ◽  
Particle Swarm Optimization ◽  
Influencing Factors ◽  
Load Forecasting ◽  
Particle Swarm ◽  
Forecast Accuracy ◽  
Support Vector ◽  
Model Parameters ◽  
Short Term ◽  
Swarm Optimization

In this work, we summarized the characteristics and influencing factors of load forecasting based on its application status. The common methods of the short-term load forecasting were analyzed to derive their advantages and disadvantages. According to the historical load and meteorological data in a certain region of Taizhou, Zhejiang Province, a least squares support vector machine model was used to discuss the influencing factors of forecasting. The regularity of the load change was concluded to correct the “abnormal data” in the historical load data, thus normalizing the relevant factors in load forecasting. The two parameters are as follows Gauss kernel function and Eigen parameter C in LSSVM had a significant impact on the model, which was still solved by empirical methods. Therefore, the particle swarm optimization was used to optimize the model parameters. Taking the error of test set as the basis of judgment, the optimization of model parameters was achieved to improve forecast accuracy. The practical examples showed that the method in the work had good convergence, forecast accuracy, and training speed.

scholarly journals A Compound Structure for Wind Speed Forecasting Using MKLSSVM with Feature Selection and Parameter Optimization

2018 ◽  
Vol 2018 ◽  
pp. 1-21 ◽  
Author(s):  
Sizhou Sun ◽  
Jingqi Fu ◽  
Feng Zhu ◽  
Nan Xiong
Keyword(s):  
Feature Selection ◽  
Wind Speed ◽  
Search Algorithm ◽  
Least Square ◽  
Support Vector ◽  
Intrinsic Mode Functions ◽  
Short Term ◽  
Wind Speed Forecasting ◽  
Wind Speed Prediction ◽  
Speed Prediction

The aims of this study contribute to a new hybrid model by combining ensemble empirical mode decomposition (EEMD) with multikernel function least square support vector machine (MKLSSVM) optimized by hybrid gravitation search algorithm (HGSA) for short-term wind speed prediction. In the forecasting process, EEMD is adopted to make the original wind speed data decomposed into intrinsic mode functions (IMFs) and one residual firstly. Then, partial autocorrelation function (PACF) is applied to identify the correlation between the corresponding decomposed components. Subsequently, the MKLSSVM using multikernel function of radial basis function (RBF) and polynomial (Poly) kernel function by weight coefficient is exploited as core forecasting engine to make the short-term wind speed prediction. To improve the regression performance, the binary-value GSA (BGSA) in HGSA is utilized as feature selection approach to remove the ineffective candidates and reconstruct the most relevant feature input-matrix for the forecasting engine, while real-value GSA (RGSA) makes the parameter combination optimization of MKLSSVM model. In the end, these respective decomposed subseries forecasting results are combined into the final forecasting values by aggregate calculation. Numerical results and comparable analysis illustrate the excellent performance of the EEMD-HGSA-MKLSSVM model when applied in the short-term wind speed forecasting.

Power Short-Term Load Forecasting Based on QPSO-SVM

2012 ◽  
Vol 591-593 ◽  
pp. 1311-1314
Author(s):  
Xing Tong Zhu ◽  
Bo Xu
Keyword(s):  
Support Vector Machine ◽  
Particle Swarm Optimization ◽  
Quantum Particle ◽  
Close Contact ◽  
Load Forecasting ◽  
Particle Swarm ◽  
Support Vector ◽  
Short Term ◽  
Swarm Optimization ◽  
Short Term Load Forecasting

The values of parameters of support vector machine have close contact with its forecast accuracy. In order to accurately forecast power short-term load,we presented a power short-term load forecasting method based on quantum-behaved particle swarm optimization and support vector machine.First,cauchy distribution was used to improve the quantum particle swarm algorithm.Secondly,the improved quantum particle swarm optimization algorithm was used to optimize the parameter of support vector machine.Finally, the support vector machine was used for power short-term load forecasting. In the proposed method such factors impacting loads as meteorology,weather and date types are comprehensively considered. The experimental results show that the root-mean-square relative error of the proposed method is only 1.90%, which is less than those of SVM and PSO-SVM model by 2.29% and 2.80%, respectively.

Sign in / Sign up

Export Citation Format

Share Document