The Statement of Research Progress in Embedded Steel Plate Shear Wall

2014 ◽  
Vol 638-640 ◽  
pp. 287-291
Author(s):  
Hai Xia Zhang ◽  
Qi Peng ◽  
Li Xuan Zhao
Keyword(s):  
Steel Plate ◽  
Rapid Development ◽  
Shear Walls ◽  
Shear Wall ◽  
Lateral Force ◽  
Research Progress ◽  
Steel Plate Shear Wall ◽  
High Rise ◽  
Main Component ◽  
Stiffened Steel

Shear wall is the main component that resists the lateral force for high-rise buildings. With the rapid development of high-rise buildings, especially the super high-rise buildings, requirements for seismic performance of shear walls have become more sophisticated. This introduction summarizes the commonly used in embedded development and existing problems of steel plate shear wall, which are stiffened steel plate shear wall, non-stiffened steel plate shear wall, composite steel plate shear wall, preventing buckling of steel plate shear wall and low yield point steel plate shear wall.

Seismic Research and Development of Steel Plate Concrete Composite Shear Wall

2012 ◽  
Vol 238 ◽  
pp. 640-642
Author(s):  
Ya Bin Yang
Keyword(s):  
Seismic Performance ◽  
Steel Plate ◽  
Rapid Development ◽  
Engineering Application ◽  
Shear Walls ◽  
Shear Wall ◽  
Lateral Force ◽  
High Rise ◽  
Composite Shear Wall ◽  
Composite Shear

Shear wall is the main component that resists the lateral force for high-rise buildings. With the rapid development of high-rise buildings, especially the super high-rise buildings, requirements for seismic performance of shear walls have become more sophisticated. The steel plate concrete composite shear wall shows good seismic performance. It has made rapid development through the research of seismic performance in the way of seismic design to the practical engineering application of steel plate concrete composite shear wall. Recent research situation and prospect of composite shear wall around the world have been introduced in this paper.

scholarly journals Evaluation of Steel Plate Shear Wall Performance with Different Sections and Arrangements of Stiffeners and its Effect on Project Management during Construction and Improvement of the Building

2021 ◽  
Vol 11 (1) ◽  
pp. 6043-6063
Author(s):  
Ali Jafarian ◽  
Seyed Babak Jafarian
Keyword(s):  
Steel Plate ◽  
Nonlinear Dynamic Analysis ◽  
Shear Walls ◽  
Shear Wall ◽  
Economic Benefits ◽  
Lateral Loads ◽  
Steel Plate Shear Wall ◽  
High Rise ◽  
Earthquake Force ◽  
The Future

Considering the increase in the current construction process and the future needs of Iran, the necessity to use high-rise buildings for reduction in urbanization costs and optimal use of land will be inevitable in the future. The performance of steel plate shear wall system as a modern global system, which has an effective application in high-rise buildings and also brings economic benefits compared to previous systems, is evaluated in this study. Steel Plate Shear Walls (SPSW) are a new type of system resistant to wind and earthquake lateral loads, which dates back to the 1970s. In this research, eight samples of shear wall with various stiffening arrangements and sections with ST37 and ST52 alloys are modeled. To evaluate the nonlinear dynamic analysis, the samples are subjected to the San Fernando earthquake force and are modeled and analyzed by ABAQUS software based on the finite element theory. The results of analyzing the samples indicate better performance of the system with stiffener in both vertical and horizontal directions. Also, the use of sections with ST52 alloy has improved the performance of the shear wall by approximately 40%.

SEISMIC LATERAL FORCE DISTRIBUTION FOR DUCTILITY-BASED DESIGN OF STEEL PLATE SHEAR WALLS

2012 ◽  
Vol 06 (01) ◽  
pp. 1250004 ◽  
Author(s):  
SWAPNIL B. KHARMALE ◽  
SIDDHARTHA GHOSH
Keyword(s):  
Steel Plate ◽  
Shear Walls ◽  
Shear Wall ◽  
Lateral Force ◽  
Performance Based Design ◽  
Force Distribution ◽  
Steel Plate Shear Walls ◽  
Steel Plate Shear Wall ◽  
Design Requirements ◽  
Ductility Ratio

The thin unstiffened steel plate shear wall (SPSW) system has now emerged as a promising lateral load resisting system. Considering performance-based design requirements, a ductility-based design was recently proposed for SPSW systems. It was felt that a detailed and closer look into the aspect of seismic lateral force distribution was necessary in this method. An investigation toward finding a suitable lateral force distribution for ductility-based design of SPSW is presented in this paper. The investigation is based on trial designs for a variety of scenarios where five common lateral force distributions are considered. The effectiveness of an assumed trial distribution is measured primarily on the basis of how closely the design achieves the target ductility ratio, which is measured in terms of the roof displacement. All trial distributions are found to be almost equally effective. Therefore, the use of any commonly adopted lateral force distribution is recommended for plastic design of SPSW systems.

Numerical Study of Stiffened Steel Plate Shear Wall with Opening under Horizontal and Vertical Loads

2014 ◽  
Vol 501-504 ◽  
pp. 563-567
Author(s):  
Zong Jing Li ◽  
Gan Ping Shu
Keyword(s):  
Seismic Performance ◽  
Steel Plate ◽  
Numerical Study ◽  
Shear Walls ◽  
Shear Wall ◽  
Steel Plate Shear Wall ◽  
Vertical Loading ◽  
Long Span ◽  
Hysteretic Performance ◽  
Stiffened Steel

When steel plate shear walls (SPSWs) are fitted into a long-span truss system, horizontal and vertical deformation should both be considered to evaluate the seismic performance of the structure. Numerical analysis is conducted to study the seismic performance of stiffened steel plate shear wall with opening subject to horizontal and vertical loading respectively based on a project. Results of the analysis indicate that stress distribution and deformation patterns of SPSW with opening are quite similar under horizontal and vertical loading. Stiffeners around the opening should be stretched to full height or width of the SPSW and strengthened by using larger thickness or width. The grids at the four corners of the opening are recommended to be further strengthened by additional stiffeners. SPSW with opening exhibits good hysteretic performance and energy dissipation in both loading directions.

The Analytical Study for Seismic Performance of Coupled Steel Plate Shear Wall

2013 ◽  
Vol 831 ◽  
pp. 149-152
Author(s):  
Kang Min Lee ◽  
Keun Yeong Oh ◽  
Rui Li ◽  
Liu Yi Chen ◽  
Woo Seok Kim
Keyword(s):  
Seismic Performance ◽  
Parametric Analysis ◽  
Analytical Study ◽  
Steel Plate ◽  
Shear Walls ◽  
Shear Wall ◽  
Structural System ◽  
Steel Plate Shear Wall ◽  
High Rise ◽  
Coupled Shear Wall

In the last several decades, coupled shear wall have become recognized as efficient lateral load resisting systems for high-rise structures, increasingly. Coupled shear walls give considerable lateral stiffness and strength as well as providing an architecturally practical structural system. In this paper, in order to observe seismic performance of coupled steel plate shear wall, models of previous study was verified, and coupled shear wall with steel plate was carried out with various parametric analysis. Parametric analysis was performed with various width of bay. As a result, model that aspect ratio of steel plate was close to 1 was the most structurally safe.

scholarly journals Effect of Corrugation Angle and Direction on the Performance of Corrugated Steel Plate Shear Walls

2018 ◽  
Vol 4 (11) ◽  
pp. 2667
Author(s):  
Hayder Fadhil ◽  
Amer Ibrahim ◽  
Mohammed Mahmood
Keyword(s):  
Steel Plate ◽  
Low Cost ◽  
Shear Walls ◽  
High Strength ◽  
Shear Wall ◽  
Initial Stiffness ◽  
Construction Time ◽  
Element Analysis ◽  
Steel Plate Shear Wall ◽  
Steel Shear Wall

Corrugated steel plate shear wall (CSPSW) is one of the lateral resistance systems which consists mainly of steel frame (beam and column) with vertical or horizontal corrugated steel plate connected to the frame by weld, bolts or both. This type of steel shear wall characterized by low cost and short construction time with high strength, ductility, initial stiffness and excellent ability to dissipate energy. The aim of this paper is to evaluate the effect of corrugation angle and its direction on the performance of CSPSW under cyclic loading. The Finite element analysis was employed to achieve the research aim. The FE models were validated with experimental data available in the literature. Results reveal that the corrugation angle has a clear influence on initial stiffness, strength, ductility, and energy dissipation of CSPSW. The optimum performance of CSPSW can be obtained with angles of 30o for CSPSW with vertical corrugation and 20o for CSPSW with horizontal corrugation. The use of CSPSW with vertical corrugation provides higher strength, stiffness, and ductility compared to CSPSW with horizontal corrugation. Therefore, it is recommended to use CSPSW with vertical corrugation.

An innovative system of coupled steel plate shear wall with pin FUSE in link beam: Cyclic behavior and energy dissipation

2021 ◽  
pp. 136943322110542
Author(s):  
Mahdi Usefvand ◽  
Ahmad Maleki ◽  
Babak Alinejad
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Energy Dissipation ◽  
Steel Plate ◽  
Shear Walls ◽  
Shear Wall ◽  
High Ductility ◽  
The Finite Element Method ◽  
Steel Plate Shear Walls ◽  
Steel Plate Shear Wall

Coupled steel plate shear wall (C-SPSW) is one of the resisting systems with high ductility and energy absorption capacity. Energy dissipation in the C-SPSW system is accomplished by the bending and shear behavior of the link beams and SPSW. Energy dissipation and floor displacement control occur through link beams at low seismic levels, easily replaced after an earthquake. In this study, an innovative coupled steel plate shear wall with a yielding FUSE is presented. The system uses a high-ductility FUSE pin element instead of a link beam, which has good replaceability after the earthquake. In this study, four models of coupled steel plate shear walls were investigated with I-shaped link beam, I-shaped link beam with reduced beam section (RBS), box-link beam with RBS, and FUSE pin element under cyclic loading. The finite element method was used through ABAQUS software to develop the C-SPSW models. Two test specimens of coupled steel plate shear walls were validated to verify the finite element method results. Comparative results of the hysteresis curves obtained from the finite element analysis with the experimental curves indicated that the finite element model offered a good prediction of the hysteresis behavior of C-SPSW. It is demonstrated in this study that the FUSE pin can improve and increase the strength and energy dissipation of a C-SPSW system by 19% and 20%, respectively.

scholarly journals Connection of infill panels in steel plate shear walls

1999 ◽  
Vol 26 (5) ◽  
pp. 549-563 ◽  
Author(s):  
A Schumacher ◽  
G Y Grondin ◽  
G L Kulak
Keyword(s):  
Finite Element ◽  
Cyclic Loading ◽  
Steel Plate ◽  
Shear Walls ◽  
Element Model ◽  
Shear Wall ◽  
Experimental Program ◽  
Steel Plate Shear Wall ◽  
Infill Panels ◽  
Welded Connection

The behaviour under cyclic loading of unstiffened steel plate shear wall panels at their connection to the bounding beams and columns was investigated on full-size panel corner details. Four different infill panel connection details were tested to examine and compare their response to quasi-static cyclic loading. The load versus displacement response of the details showed gradual and stable deterioration at higher loads. The formation of tears in the connection details did not result in a loss of load-carrying capacity. In addition to the experimental program, a finite element model was developed to model the behaviour of one of the infill plate corner connection specimens. Results from the analysis showed that the finite element method can be used to obtain the load versus displacement behaviour of an infill panel-to-boundary member arrangement.Key words: cyclic loading, hysteresis, shear wall, steel, welded connection.

Literature Review of Seismic Behavior of Composite Steel Plate Shear Wall

2013 ◽  
Vol 671-674 ◽  
pp. 1408-1413
Author(s):  
Ning Zhou ◽  
Feng Xiong ◽  
Qun Yi Huang ◽  
Qi Ge ◽  
Jiang Chen
Keyword(s):  
Seismic Behavior ◽  
Steel Plate ◽  
Concrete Slab ◽  
Shear Wall ◽  
Lateral Force ◽  
Steel Plates ◽  
Steel Plate Shear Wall ◽  
Existing Problems ◽  
Energy Dissipation Capacity ◽  
Composite Steel

Composite steel plate shear wall (CSPSW), as a new lateral force resisting structure composed of steel plate and concrete slab, is introduced. CSPSWs can fully display the superiority of the steel plate and concrete. Ductility and energy dissipation capacity of the walls are increased and seismic behavior is improved. Recent seismic research around the word of two kinds of CSPSWs, namely, CSPSW with signal steel plate and CSPSW with double steel plates, is presented and discussed comprehensively. Some existing problems in current research of the walls are also reviewed in this paper.

scholarly journals Study on Seismic Performance of a Stiffened Steel Plate Shear Wall with Slits

2015 ◽  
Vol 2015 ◽  
pp. 1-16 ◽  
Author(s):  
Jin-yu Lu ◽  
Lu-nan Yan ◽  
Yi Tang ◽  
Heng-hua Wang
Keyword(s):  
Seismic Performance ◽  
Steel Plate ◽  
Pushover Analysis ◽  
Shear Wall ◽  
Frame Structure ◽  
Simplified Model ◽  
Good Prediction ◽  
Analysis Model ◽  
Steel Plate Shear Wall ◽  
Stiffened Steel

To determine the force mechanism for the steel plate shear wall with slits, the pushover analysis method was used in this study. An estimated equation for the lateral bearing capacity which considered the effect of edge stiffener was proposed. A simplified elastic-plastic analytical model for the stiffened steel slit wall composed of beam elements was presented, where the effects of edge stiffeners were taken into account. The wall-frame analysis model was established, and the geometric parameters were defined. Pushover analysis of two specimens was carried out, and the analysis was validated by comparing the results from the experiment, the shell element model, and a simplified model. The simplified model provided a good prediction of the lateral stiffness and the strength of the steel slit wall, with less than 10% error compared with the experimental results. The mutual effects of the bearing wall and the frame were also predicted correctly. In the end, the seismic performance evaluation of a steel slit wall-frame structure was presented. The results showed that the steel slit wall could prevent the beams and columns from being damaged by an earthquake and that the steel slit wall was an efficient energy dissipation component.

Sign in / Sign up

Export Citation Format

Share Document