Use of Imaging Techniques for Viewing the Internal Structure of Rubberised Asphalt Mixtures

2014 ◽  
Vol 695 ◽  
pp. 8-11 ◽  
Author(s):  
Norhidayah Abdul Hassan ◽  
Gordon Airey ◽  
Ramadhansyah Putra Jaya ◽  
Mohd Zul Hanif Mahmud ◽  
Nordiana Mashros
Keyword(s):  
Computed Tomography ◽  
Electron Microscope ◽  
Internal Structure ◽  
Imaging Techniques ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
X Ray ◽  
X Ray Computed ◽  
Rubberized Asphalt Mixture ◽  
Scanning Electron

This paper presents the application of different imaging techniques for viewing the internal structure of rubberized asphalt mixture as road materials. Two imaging techniques were used to capture the internal structure images of its compacted samples i.e. X-ray Computed Tomography (non-destructive method) and Scanning Electron Microscope, SEM (destructive method). Since a lot of previous researchers have produced extensive works on the mechanical properties, therefore, this study is an attempt to introduce the microstructure of rubberized asphalt mixtures produced using dry process method. Two types of dry mixed rubberized asphalt mixture were prepared by modifying a Hot Rolled Asphalt Mixture (HRA 60/20) with different crumb rubber sizes. A mixture of conventional HRA 60/20 was also scanned for comparison. The illustrations are aimed to provide the researchers more information regarding their internal structure distribution.Keywords: Imaging techniques, X-ray Computed Tomography, Scanning Electron Microscope, Rubberised Asphalt Mixture

scholarly journals Study on Void Structure Reconstruction of Asphalt Mixture by X-Ray Computed Tomography and Otsu’s Method

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Jiantong Zhang ◽  
Jun Yang ◽  
Tiejun Liu ◽  
Rongxing Cai ◽  
Rui Yang
Keyword(s):  
Computed Tomography ◽  
Asphalt Mixture ◽  
Accurate Estimate ◽  
Asphalt Mixtures ◽  
Air Voids ◽  
X Ray ◽  
Sample Depth ◽  
Otsu’S Method ◽  
X Ray Computed ◽  
Air Void

The purpose of this paper is to obtain the pore distribution of asphalt mixture accurately by nondestructive technology. Specimens prepared with four gradations of asphalt mixtures were scanned using X-ray computed tomography (CT) which was used to measure air void sizes at different depths within specimens. The air void distributions of obtained CT images were analyzed using ring blocking segmentation combining Otsu’s method, which provided an accurate estimate of air voids in asphalt mixtures. The image processing results showed that air void distribution was not uniform in the specimens; higher air void concentrations were found at the top and bottom of the specimen, and lower, in the rest of the sample depth. The air void sizes of SUP13 and AC13 are mainly distributed between 0.15 to 0.2 mm, while PA13 and SMA13 are 0.4 to 0.65 mm and 0.4 to 0.7 mm, respectively. It is believed that the CT pictures processed by the ring blocking segmentation combining Otsu’s method is feasible and rational to capture the air voids size and content of asphalt mixtures.+

scholarly journals Optimization of the energy for Breast monochromatic absorption X-ray Computed Tomography

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Pasquale Delogu ◽  
Vittorio Di Trapani ◽  
Luca Brombal ◽  
Giovanni Mettivier ◽  
Angelo Taibi ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Imaging Techniques ◽  
Fixed Dose ◽  
X Rays ◽  
Reconstruction Algorithms ◽  
Contrast Resolution ◽  
X Ray ◽  
X Ray Imaging ◽  
X Ray Computed ◽  
Dose Levels

Abstract The limits of mammography have led to an increasing interest on possible alternatives such as the breast Computed Tomography (bCT). The common goal of all X-ray imaging techniques is to achieve the optimal contrast resolution, measured through the Contrast to Noise Ratio (CNR), while minimizing the radiological risks, quantified by the dose. Both dose and CNR depend on the energy and the intensity of the X-rays employed for the specific imaging technique. Some attempts to determine an optimal energy for bCT have suggested the range 22 keV–34 keV, some others instead suggested the range 50 keV–60 keV depending on the parameters considered in the study. Recent experimental works, based on the use of monochromatic radiation and breast specimens, show that energies around 32 keV give better image quality respect to setups based on higher energies. In this paper we report a systematic study aiming at defining the range of energies that maximizes the CNR at fixed dose in bCT. The study evaluates several compositions and diameters of the breast and includes various reconstruction algorithms as well as different dose levels. The results show that a good compromise between CNR and dose is obtained using energies around 28 keV.

scholarly journals K-edge Subtraction Computed Tomography with a Compact Synchrotron X-ray Source

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Stephanie Kulpe ◽  
Martin Dierolf ◽  
Benedikt Günther ◽  
Madleen Busse ◽  
Klaus Achterhold ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Contrast Agent ◽  
Imaging Techniques ◽  
X Rays ◽  
Synchrotron Source ◽  
X Ray ◽  
Inverse Compton Scattering ◽  
Inverse Compton ◽  
X Ray Computed ◽  
Compact Light Source

Abstract In clinical diagnosis, X-ray computed tomography (CT) is one of the most important imaging techniques. Yet, this method lacks the ability to differentiate similarly absorbing substances like commonly used iodine contrast agent and calcium which is typically seen in calcifications, kidney stones and bones. K-edge subtraction (KES) imaging can help distinguish these materials by subtracting two CT scans recorded at different X-ray energies. So far, this method mostly relies on monochromatic X-rays produced at large synchrotron facilities. Here, we present the first proof-of-principle experiment of a filter-based KES CT method performed at a compact synchrotron X-ray source based on inverse-Compton scattering, the Munich Compact Light Source (MuCLS). It is shown that iodine contrast agent and calcium can be clearly separated to provide CT volumes only showing one of the two materials. These results demonstrate that KES CT at a compact synchrotron source can become an important tool in pre-clinical research.

Sign in / Sign up

Export Citation Format

Share Document