Experimental Study of Behavior of Ceramsite Concrete Filled Steel Tubes after Exposure to Fire

2011 ◽  
Vol 71-78 ◽  
pp. 3721-3724 ◽  
Author(s):  
Ming Zhou ◽  
Xin Tang Wang ◽  
Jian Min Wang ◽  
Zhi Guo Xie
Keyword(s):  
Experimental Study ◽  
Bearing Capacity ◽  
Fire Behavior ◽  
Test Results ◽  
Fire Response ◽  
Fire Load ◽  
Steel Tubes ◽  
Maximum Value ◽  
Concrete Filled Steel Tubes ◽  
Strength And Ductility

The post-fire behavior of a set of ceramsite concrete filled steel tubes (note as CCST) after exposure to fire are experimentally studied. Effect of the maximum value of fire response temperatures of the tubes and their geometric parameters on the strength and ductility of the specimens were especially discussed. The test results show that the specimens of CCST have higher post-fire bearing capacity and better ductility, there was no obvious descent segment in post-fire load-displacement curves of the most specimens subjected to fire load. It was concluded that the maximum response temperature of specimens has great effect on the post-fire bearing capacity of concrete-filled steel tubes subjected to fire load.

Experimental Study of Post-Fire Bearing Capacity of the Circular Steel Tubes with Different Fire-Resistant Coating

2010 ◽  
Vol 163-167 ◽  
pp. 749-753
Author(s):  
Yao Ji ◽  
Xin Tang Wang ◽  
Ming Zhou ◽  
Wan Zhen Wang
Keyword(s):  
Experimental Study ◽  
Bearing Capacity ◽  
Fire Test ◽  
Steel Tube ◽  
Test Results ◽  
Fire Response ◽  
Steel Tubes ◽  
Protective Material ◽  
Tubular Columns ◽  
Maximum Value

In order to look into the causes of fire response and post-fire bearing capacity of the steel tubular columns protected with different materials, the fire test was conducted for a set of circular steel tubes protected with different materials such as gypsum fireproof panel, bamboo plywood and the ordinary lumber core plywood, and the steel tube without any protective material. The fire response temperature of surface of steel tubes is measured and the axial compressive bearing capacity of the specimens after fire are tested and analyzed. The test results show that gypsum fireproof panel has the best fire protection characteristics, the ordinary lumber core plywood and bamboo plywood can also retard rising of the surface temperature of the steel tubes during the initial 35min although they are combustible materials. It is found that the post-fire bearing capacity of the steel tubes protected with different materials varies evidently, and the maximum value of response temperature has the greatest effect.

Experimental Study of Post-Fire Performance of Ceramsite Concrete Filled Steel Tabular Columns

2011 ◽  
Vol 71-78 ◽  
pp. 3733-3736 ◽  
Author(s):  
Xin Tang Wang ◽  
Jie Yin ◽  
Ming Zhou ◽  
Jian Min Wang
Keyword(s):  
Experimental Study ◽  
Bearing Capacity ◽  
Geometrical Parameters ◽  
Test Results ◽  
Fire Performance ◽  
Fire Response ◽  
Composite Columns ◽  
Short Columns ◽  
Maximum Value ◽  
Strength And Ductility

The post-fire performance of a set of ceramsite concrete filled steel tabular short columns (noted as CCSSC) after exposure to fire are experimentally studied. Effect of the maximum value of fire response temperatures and geometrical parameters of the composite columns on the strength and ductility of the specimens were especially discussed. The test results show that the specimens of CCSSC have higher post-fire bearing capacity and better ductility, and both of maximum response temperature and geometrical parameters of the specimens presented here have great effect on the post-fire bearing capacity and ductility of ceramsite concrete-filled steel short columns after exposure to fire.

Research of Post-Fire Mechanical Property of Steel Fiber Reinforced Ceramsite Concrete Filled Steel Tubes after Exposure to Fire

2013 ◽  
Vol 790 ◽  
pp. 181-184
Author(s):  
Hai Lun Tong ◽  
Tian Hong Wang ◽  
Jian Qi Lu ◽  
Xin Tang Wang
Keyword(s):  
Bearing Capacity ◽  
Steel Fiber ◽  
Fiber Reinforced ◽  
Fire Load ◽  
Furnace Temperature ◽  
Steel Tubes ◽  
Compression Performance ◽  
Short Columns ◽  
Maximum Value ◽  
Concrete Filled Steel Tubes

The post-fire axial compressive behavior of a set of steel fiber reinforced ceramsite concrete filled steel tubular short columns (noted as SFCC-SSC) was experimentally studied. Effect of the maximum value of fire response temperatures of the specimens and some parameters on the axial compression performance of the specimens was especially discussed. The results show that the surface of the steel tubes after fire presented dark red for 700°Cof furnace temperature and orange red for 900°C, and there was no obvious descending segment in post-fire load-displacement curves of the most specimens subjected to fire load. It was concluded that the axial bearing capacity of the specimens aftersuffering the furnace temperature of 900°C is much less than that of the specimens not subjected to fire load, and the volume of steel fiber of 0.5% of has the greatest effect on post-fire bearing capacity of specimens of SFCC-SSC.

Experimental Study of Mechanical Behavior of Concrete Filled Steel Tubular Short Columns after Fire

2010 ◽  
Vol 168-170 ◽  
pp. 674-678 ◽  
Author(s):  
Ming Zhou ◽  
Xin Tang Wang ◽  
Wan Zhen Wang
Keyword(s):  
Mechanical Behavior ◽  
Bearing Capacity ◽  
Test Results ◽  
Fire Load ◽  
Ordinary Concrete ◽  
Short Column ◽  
Short Columns ◽  
Maximum Value ◽  
Bearing Load ◽  
Strength And Ductility

Mechanical behavior and bearing capacity of ordinary concrete filled steel tubular short column (NCSSC) and ceramsite concrete filled steel tubular short column (CCSSC) subjected to fire load are experimentally investigated. Effect of the parameters, such as the maximum value of fire temperatures, fire duration on the strength and ductility of the two types of specimens were especially discussed. The test results show that both of the specimens of NCSSC and CCSSC after fire have higher bearing capacity and better ductility, there was no descent segment in load-displacement curves of the most specimens after the fire load was subjected, and even the case that bearing load increased again after descent segment arose. It was concluded that the maximum response temperature of specimens and fire duration time has great effect on the axial bearing capacity of concrete-filled steel tubular short columns subjected to fire, and there is a turning point of temperature for the influence.

Experimental Study of Performance of Self-Stress Lightweight Aggregate Concrete Filled Steel Tubes after Exposure to Fire

2013 ◽  
Vol 790 ◽  
pp. 173-176
Author(s):  
Jin Can Xu ◽  
Peng Fei Ren ◽  
Hai Lun Tong ◽  
Xin Tang Wang
Keyword(s):  
Bearing Capacity ◽  
Fire Behavior ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Fire Load ◽  
Steel Tubes ◽  
Aggregate Concrete ◽  
Expansive Agent ◽  
Short Columns ◽  
Concrete Filled Steel Tubes

The post-fire behavior of a set of self-stress lightweight aggregate concrete filled steel tubular short columns (noted as SSLC-SSC) after exposure to fire was experimentally studied. Effect of the maximum value of fire response temperatures of the tubes and their geometric parameters on the strength and the other mechanical property of the specimens were especially discussed. The experimental results show that the specimens of SSLC-SSC have higher post-fire bearing capacity and better plastic deformation, there was no obvious descent segment in post-fire load-displacement curves of the most specimens subjected to fire load. It was concluded that the maximum response temperature of specimens has great effect on the post-fire bearing capacity of self-stress concrete-filled steel tubes subjected to fire load, and the value of self-stress corresponding to 10% of dosage of expansive agent has the greatest effect on post-fire bearing capacity of specimens of SSLC-SSC.

Experimental Study of Mechanical Behavior of Ceramsite Concrete Filled Steel Tubular Columns Subjected to Fire Load

2011 ◽  
Vol 243-249 ◽  
pp. 1228-1232
Author(s):  
Xin Tang Wang ◽  
Zhi Guo Xie ◽  
Ming Zhou ◽  
Jie Yin
Keyword(s):  
Mechanical Behavior ◽  
Bearing Capacity ◽  
Longitudinal Strain ◽  
Test Results ◽  
Fire Load ◽  
Short Column ◽  
Tubular Columns ◽  
Short Columns ◽  
Maximum Value ◽  
Strength And Ductility

Mechanical behavior of a set of ordinary concrete filled steel tubular short column (note as NCSSC) and ceramsite concrete filled steel tubular short column (note as CCSSC) subjected to fire load are experimentally investigated. Effect of the parameters, such as the maximum value of fire temperatures, fire duration on the strength and ductility of the two types of specimens were especially discussed. The test results show that both of the specimens of NCSSC and CCSSC have higher post-fire bearing capacity and better ductility, there was no descent segment in post-fire load-displacement curves of the most specimens subjected to fire load. It was concluded that the maximum response temperature of specimens and fire duration time has great effect on the axial bearing capacity of concrete-filled steel tubular short columns subjected to fire. The maximum longitudinal strain of specimens of CCSSC is less than the corresponding value of the longitudinal strain of NCSSC.

Study of Fire Behavior of a Profiled Sheet-Ceramsite Concrete Composite Floor

2011 ◽  
Vol 243-249 ◽  
pp. 5231-5235
Author(s):  
Xin Tang Wang ◽  
Ming Zhou ◽  
Hai Jiang Wang ◽  
Zhi Guo Xie
Keyword(s):  
Bearing Capacity ◽  
Fire Behavior ◽  
Experimental Results ◽  
Dead Load ◽  
Fire Response ◽  
Fire Load ◽  
Distributed Load ◽  
Obvious Change ◽  
Bending Capacity

In order to study the fire behavior of the profiled sheet-ceramsite concrete composite floor subjected to fire load, research on fire response and post-fire bearing capacity of a profiled sheet-ceramsite concrete composite floor subjected to dead load, which has no shearing nails, is carried out here through experiment. Based on the experimental results, the fire behavior and post-fire bearing capacity of the floor after exposure to fire are analyzed. It is shown that the failure form of the profiled sheet-ceramsite concrete composite floor after exposure to fire has obvious change compared with the floor not subjected to fire load, but the composite floor subjected to fire still exhibits higher bending capacity, and the ultimate value of the equivalent distributed load is up to 35kN/m2, which may be used as basis of strengthening and repairing of the profiled sheet-ceramsite concrete composite floor after exposure to fire.

Behavior of CFRP-confined reactive powder concrete-filled steel tubes under axial compression

2020 ◽  
pp. 136943322097478
Author(s):  
Song Li ◽  
Chu-Jie Jiao
Keyword(s):  
Bearing Capacity ◽  
Axial Compression ◽  
Local Buckling ◽  
Steel Tube ◽  
Experimental Results ◽  
Reactive Powder Concrete ◽  
Test Results ◽  
Steel Tubes ◽  
Reactive Powder ◽  
Concrete Filled Steel Tubes

Reactive powder concrete-filled steel tubes (RPCFSTs) have become an important research target in recent years. In engineering applications, RPCFSTs can provide superior vertical components for high-rise and tower buildings, thereby enabling developers to provide more floor space. However, this type of composite structure is prone to inelastic outward local buckling. The use of carbon fiber reinforced polymer (CFRP) wrapping to suppress such local buckling has shown great potential in limited test results. This paper presents experimental results concerning the axial compression of CFRP-confined reactive powder concrete-filled circular steel tubes (CF-RPCFSTs). We included 18 specimens in our experimental investigation, varying the number of CFRP layers, steel tube thickness, and RPC strength. According to our test results, CF-RPCFSTs exhibit compression shear failure and drum-shaped failure. The CFRP wrap can effectively enhance bearing capacity and postpone local buckling of the steel tube. In addition, three-layer CFRP-confined RPC-filled thin-wall steel tubes are suitable for engineering. We also propose a model to calculate the bearing capacity of CF-RPCFSTs. Compared to the existing model of CFRP-confined concrete-filled steel tubes, the results obtained using the proposed model are in good agreement with our experimental results.

Study of Post-Fire Performance of Steel Fiber Reinforced Ceramsite Concrete Filled Steel Tubes

2013 ◽  
Vol 790 ◽  
pp. 177-180
Author(s):  
Peng Fei Ren ◽  
Jin Can Xu ◽  
Jian Qi Lu ◽  
Xin Tang Wang
Keyword(s):  
Bearing Capacity ◽  
Steel Fiber ◽  
Fire Behavior ◽  
Fiber Reinforced Concrete ◽  
Lightweight Aggregate Concrete ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Steel Tubes ◽  
Short Columns ◽  
Concrete Filled Steel Tubes

The post-fire behavior of a set of steel fiber reinforced lightweight aggregate concrete filled steel tubular short columns (noted as SFLC-SSC) after exposure to fire was experimentally studied. Effect of the maximum value of fire response temperatures of the tubes and their geometric parameters on the strength and the other mechanical property of the specimens were especially discussed. The experimental results show that the specimens of SFLC-SSC have higher post-fire bearing capacity and better plastic deformation. It was concluded that the maximum response temperature of the specimens has great effect on the post-fire bearing capacity of steel fiber reinforced concrete-filled steel tubes subjected to fire load, and incorporation of 0.5% of volume of steel fiber is best for enhancing the axial compressive bearing capacity of the specimens of SFLC-SSC after exposure to fire.

Research on Behavior of Circular Steel Tubes with Different Coating Subjected to Fire Load

2011 ◽  
Vol 243-249 ◽  
pp. 5227-5230
Author(s):  
Ming Zhou ◽  
Xin Tang Wang ◽  
Jie Yin ◽  
Zhi Guo Xie
Keyword(s):  
Outer Surface ◽  
Steel Tube ◽  
Test Results ◽  
Maximum Difference ◽  
Fire Response ◽  
Fire Load ◽  
Steel Tubes ◽  
Protective Material ◽  
Fire Experiment ◽  
Inner Surface

The fire experiment was conducted for three of circular steel tubes protected with two different gypsum fireproof panel and the steel tube without any protective material. The fire response temperature of surface of steel tubes was measured and the axial compressive bearing capacity of the specimens after fire were tested and analyzed. The test results show that gypsum fireproof panel has better fire protection characteristics. It is noted that the variation of temperatures of inner surface of gypsum fireproof panel under fire is consistent with the temperature of outer surface of the steel tube. The maximum difference of temperature between the outer surface of the tube and the furnace space is 150°C as the fire keeps stable for the steel tube without any protection. It is concluded that two of the specimens protected with gypsum fireproof panel have larger post-fire capacity, which means that the gypsum fireproof panel has better effect on fireproof of the steel tube under fire.

Sign in / Sign up

Export Citation Format

Share Document