Study of Post-Fire Performance of Steel Fiber Reinforced Ceramsite Concrete Filled Steel Tubes

2013 ◽  
Vol 790 ◽  
pp. 177-180
Author(s):  
Peng Fei Ren ◽  
Jin Can Xu ◽  
Jian Qi Lu ◽  
Xin Tang Wang
Keyword(s):  
Bearing Capacity ◽  
Steel Fiber ◽  
Fire Behavior ◽  
Fiber Reinforced Concrete ◽  
Lightweight Aggregate Concrete ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Steel Tubes ◽  
Short Columns ◽  
Concrete Filled Steel Tubes

The post-fire behavior of a set of steel fiber reinforced lightweight aggregate concrete filled steel tubular short columns (noted as SFLC-SSC) after exposure to fire was experimentally studied. Effect of the maximum value of fire response temperatures of the tubes and their geometric parameters on the strength and the other mechanical property of the specimens were especially discussed. The experimental results show that the specimens of SFLC-SSC have higher post-fire bearing capacity and better plastic deformation. It was concluded that the maximum response temperature of the specimens has great effect on the post-fire bearing capacity of steel fiber reinforced concrete-filled steel tubes subjected to fire load, and incorporation of 0.5% of volume of steel fiber is best for enhancing the axial compressive bearing capacity of the specimens of SFLC-SSC after exposure to fire.

Research of Post-Fire Mechanical Property of Steel Fiber Reinforced Ceramsite Concrete Filled Steel Tubes after Exposure to Fire

2013 ◽  
Vol 790 ◽  
pp. 181-184
Author(s):  
Hai Lun Tong ◽  
Tian Hong Wang ◽  
Jian Qi Lu ◽  
Xin Tang Wang
Keyword(s):  
Bearing Capacity ◽  
Steel Fiber ◽  
Fiber Reinforced ◽  
Fire Load ◽  
Furnace Temperature ◽  
Steel Tubes ◽  
Compression Performance ◽  
Short Columns ◽  
Maximum Value ◽  
Concrete Filled Steel Tubes

The post-fire axial compressive behavior of a set of steel fiber reinforced ceramsite concrete filled steel tubular short columns (noted as SFCC-SSC) was experimentally studied. Effect of the maximum value of fire response temperatures of the specimens and some parameters on the axial compression performance of the specimens was especially discussed. The results show that the surface of the steel tubes after fire presented dark red for 700°Cof furnace temperature and orange red for 900°C, and there was no obvious descending segment in post-fire load-displacement curves of the most specimens subjected to fire load. It was concluded that the axial bearing capacity of the specimens aftersuffering the furnace temperature of 900°C is much less than that of the specimens not subjected to fire load, and the volume of steel fiber of 0.5% of has the greatest effect on post-fire bearing capacity of specimens of SFCC-SSC.

Experimental Study of Performance of Self-Stress Lightweight Aggregate Concrete Filled Steel Tubes after Exposure to Fire

2013 ◽  
Vol 790 ◽  
pp. 173-176
Author(s):  
Jin Can Xu ◽  
Peng Fei Ren ◽  
Hai Lun Tong ◽  
Xin Tang Wang
Keyword(s):  
Bearing Capacity ◽  
Fire Behavior ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Fire Load ◽  
Steel Tubes ◽  
Aggregate Concrete ◽  
Expansive Agent ◽  
Short Columns ◽  
Concrete Filled Steel Tubes

The post-fire behavior of a set of self-stress lightweight aggregate concrete filled steel tubular short columns (noted as SSLC-SSC) after exposure to fire was experimentally studied. Effect of the maximum value of fire response temperatures of the tubes and their geometric parameters on the strength and the other mechanical property of the specimens were especially discussed. The experimental results show that the specimens of SSLC-SSC have higher post-fire bearing capacity and better plastic deformation, there was no obvious descent segment in post-fire load-displacement curves of the most specimens subjected to fire load. It was concluded that the maximum response temperature of specimens has great effect on the post-fire bearing capacity of self-stress concrete-filled steel tubes subjected to fire load, and the value of self-stress corresponding to 10% of dosage of expansive agent has the greatest effect on post-fire bearing capacity of specimens of SSLC-SSC.

Experimental Study of Post-Fire Behavior of Steel Fiber Reinforced Ceramsite Concrete Filled Steel Tubes

2012 ◽  
Vol 204-208 ◽  
pp. 3401-3404
Author(s):  
Jin Yi Zhang ◽  
Xin Tang Wang ◽  
Ping Xin Sun ◽  
Hong Liang Sun
Keyword(s):  
Steel Fiber ◽  
Mechanical Performance ◽  
Fire Behavior ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Fire Performance ◽  
Fiber Reinforced ◽  
Furnace Temperature ◽  
Steel Tubes ◽  
Concrete Filled Steel Tubes

The axial compressive mechanical behavior of steel fiber reinforced ceramsite concrete filled steel tubes (noted as SFR-CCST) after exposure to fire are experimentally studied. Effect of furnace temperature, dosage of steel fiber in specimens on the post-fire mechanical performance of the specimens after exposure to fire was especially discussed. The results show that all the specimens of SFR-CCST have higher post-fire bearing capacity and better plastic deformation, and there was no obvious descending segment in the load-strain curves of the most specimens after exposure to fire. It was concluded that the furnace temperature applied to the specimens and dosage of steel fiber in the specimens of SFR-CCST has some effect on the post-fire mechanical performance of the ceramsite concrete-filled steel tubes after exposure to fire, and the dosage of steel fiber of 0.5% has the most effect on the post-fire performance of lightweight aggregate concrete filled steel tubes after exposure to fire.

Non-Linear FEM Analysis of Steel Fiber Reinforced Concrete Shearwall

2010 ◽  
Vol 163-167 ◽  
pp. 1551-1554 ◽  
Author(s):  
Jun Zhao ◽  
Li Jun Wang ◽  
Dan Ying Gao
Keyword(s):  
Finite Element ◽  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Steel Fiber ◽  
Volume Fraction ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Analysis Model ◽  
Steel Fiber Reinforced Concrete ◽  
Element Analysis

The numerical simulation by nonfinear finite element method(FEM) was adopted to analyze the behavior and the influences of the fraction of steel fiber by volume fraction and the strength of steel fiber reinforced concrete on the bearing capacity and the ductility of reinforced concrete shearwalls. The results show that with the increase of the fraction of steel fiber by volume fraction, the bearing capacity and ductility coefficient of steel fiber reinforced concrete shearwalls increase gradually. With the increase of the strength of steel fiber reinforced concrete, the bearing capacity and ductility coefficient of steel fiber reinforced concrete shearwalls decrease. It proves the rationality of the unit type, stress-strain relation of material and failure criteria used in the finite element analysis model.

Load and Deformation Properties of Steel Fiber Reinforced Concrete ShearWall

2011 ◽  
Vol 69 ◽  
pp. 23-27 ◽  
Author(s):  
Jun Zhao ◽  
Li Jun Wang ◽  
Dan Ying Gao
Keyword(s):  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Steel Fiber ◽  
Volume Fraction ◽  
Load Capacity ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Deformation Properties

The numerical simulation by nonlinear finite element method(FEM) was adopted to analyze the behavior and the influences of the volume fraction of steel fibers and the strength of steel fiber reinforced concrete on the load capacity and the deformation performance of reinforced concrete shearwalls.The effect of steel fiber on the FEM was determined. The results show that with the increase of the volume fraction of steel fibers, the crack load, bearing capacity and ductility coefficient of steel fiber reinforced concrete shearwalls increase gradually. With the increase of the strength of steel fiber reinforced concrete, the bearing capacity and ductility coefficients of steel fiber reinforced concrete shearwalls decrease.

Acoustic emission by steel fiber reinforced concrete under tensile damage

2017 ◽  
Vol 59 (7-8) ◽  
pp. 653-660 ◽  
Author(s):  
Wang Yan ◽  
Ge Lu ◽  
Chen Shi Jie ◽  
Zhou Li ◽  
Zhang Ting Ting
Keyword(s):  
Acoustic Emission ◽  
Reinforced Concrete ◽  
Steel Fiber ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Tensile Damage

On axial compressive behavior of steel fiber reinforced concrete confined by FRP

2021 ◽  
pp. 136943322098165
Author(s):  
Hossein Saberi ◽  
Farzad Hatami ◽  
Alireza Rahai
Keyword(s):  
Reinforced Concrete ◽  
Experimental Test ◽  
Steel Fiber ◽  
Experimental Tests ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Test Results ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Frp Confinement

In this study, the co-effects of steel fibers and FRP confinement on the concrete behavior under the axial compression load are investigated. Thus, the experimental tests were conducted on 18 steel fiber-reinforced concrete (SFRC) specimens confined by FRP. Moreover, 24 existing experimental test results of FRP-confined specimens tested under axial compression are gathered to compile a reliable database for developing a mathematical model. In the conducted experimental tests, the concrete strength was varied as 26 MPa and 32.5 MPa and the steel fiber content was varied as 0.0%, 1.5%, and 3%. The specimens were confined with one and two layers of glass fiber reinforced polymer (GFRP) sheet. The experimental test results show that simultaneously using the steel fibers and FRP confinement in concrete not only significantly increases the peak strength and ultimate strain of concrete but also solves the issue of sudden failure in the FRP-confined concrete. The simulations confirm that the results of the proposed model are in good agreement with those of experimental tests.

Driven steel-fiber-reinforced-concrete pyramidal piles

1984 ◽  
Vol 21 (3) ◽  
pp. 108-111
Author(s):  
V. S. Sterin ◽  
V. A. Golubenkov ◽  
G. S. Rodov ◽  
B. V. Leikin ◽  
L. G. Kurbatov
Keyword(s):  
Reinforced Concrete ◽  
Steel Fiber ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete
Sign in / Sign up

Export Citation Format

Share Document