Research of MES Scheduling Strategy Based on Hypercube Paths Link Algorithm

2015 ◽  
Vol 734 ◽  
pp. 487-490
Author(s):  
Yu Luo ◽  
Wei Long ◽  
Si Jian Lin ◽  
Jiang Huang

According to the characteristics of multi-targets, multi-constraints, and solving difficulties in the aviation manufacturing production planning, the hypercube paths link algorithm based on the basic unit is proposed which is judged by the input and output. A simplified scheduling model is proposed to solve the real-time dynamic link path, which could improve the agility of the organization form of the workshop, and provide a new algorithm for the MES production scheduling. Finally ,the feasibility is verified by an algorithm example.

2013 ◽  
Vol 2013 ◽  
pp. 1-8
Author(s):  
Peng Ge ◽  
Zhixue Liao ◽  
Chang Liu ◽  
Peiyu Ren ◽  
Zhaoxia Guo

Tourism is one of pillar industries of the world economy. Low-carbon tourism will be the mainstream direction of the scenic spots' development, and theωpath of low-carbon tourism development is to develop economy and protect environment simultaneously. However, as the tourists' quantity is increasing, the loads of scenic spots are out of control. And the instantaneous overload in some spots caused the image phenomenon of full capacity of the whole scenic spot. Therefore, realizing the real-time schedule becomes the primary purpose of scenic spot’s management. This paper divides the tourism distribution system into several logically related subsystems and constructs a temporal and spatial multiresolution network scheduling model according to the regularity of scenic spots’ overload phenomenon in time and space. It also defines dynamic distribution probability and equivalent dynamic demand to realize the real-time prediction. We define gravitational function between fields and takes it as the utility of schedule, after resolving the transportation model of each resolution, it achieves hierarchical balance between demand and capacity of the system. The last part of the paper analyzes the time complexity of constructing a multiresolution distribution system.


2021 ◽  
Vol 343 ◽  
pp. 03005
Author(s):  
Florina Chiscop ◽  
Bogdan Necula ◽  
Carmen Cristiana Cazacu ◽  
Cristian Eugen Stoica

The topic of this paper represents our research in the process of creating a virtual model (digital twin) for a fast-food company production chain starting with the moment when a customer launches an order, following with the processing of that order, until the customer receives it. The model will describe elements that are included in this process such as equipment, human resources and the necessary space that is needed to host this layout. The virtual model created in a simulation platform will be a replicate of a real fast-food company, thus helping us observe the real time dynamic of this production system. Using WITNESS HORIZON 23 we will construct the model of the layout based on real time data received from the fast-food company. This digital twin will be used to manage the production chain material flow, evaluating the performance of the system architecture in various scenarios. In order to obtain a diagnosis of the system’s performance we will simulate the workflow running through preliminary architecture in compliance with the real time behaviour to identify the bottlenecks and blockages in the flow trajectory. In the end we will propose two different optimised architectures for the fast-food company production chain.


Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4999
Author(s):  
Xuejun Zheng ◽  
Shaorong Wang ◽  
Xin Su ◽  
Mengmeng Xiao ◽  
Zia Ullah ◽  
...  

The investigation of real-time dynamic behavior evaluation in the active distribution networks (ADNs) is a challenging task, and it has great importance due to the emerging trend of distributed generations, electric vehicles, and flexible loads integration. The advent of new elements influences the dynamic behavior of the electric distribution networks and increases the assessment complexity. However, the proper implementation of low-cost phasor measurement units (PMUs) together with the development of power system applications offer tremendous benefits. Therefore, this paper proposes a PMU-based multi-dimensional dynamic index approach for real-time dynamic behavior evaluation of ADNs. The proposed evaluation model follows the assessment principles of accuracy, integrity, practicability, and adaptability. Additionally, we introduced low-cost PMUs in the assessment model and implemented them for real-time and high-precision monitoring of dynamic behaviors in the entire distribution network. Finally, a complete model called the real-time dynamic characteristics evaluation system is presented and applied to the ADN. It is pertinent to mention that our proposed evaluation methodology does not rely on the network topology or line parameters of the distribution network since only the phasor measurements of node voltage and line current are involved in the dynamic index system. Thus, the presented methodology is well adaptive to different operation states of ADN despite frequent topology changes. The validation of the proposed approach was verified by conducting simulations on the modified IEEE 123-node distribution network. The obtained results verify the effectiveness and relevance of the proposed model for the real-time dynamic behavior evaluation of ADNs.


2012 ◽  
Vol 433-440 ◽  
pp. 7465-7470
Author(s):  
Chao Dong ◽  
Di Chen Liu ◽  
Zhen Chuan Du ◽  
Qing Fen Liao ◽  
Lei Yun ◽  
...  

This paper set up the model of power transmissive observational section and put forward the real-time tracking method of power angle curve in steady state which could be used to identify and focus on monitoring the weak links, then to take early warnings of low frequency oscillation. On the dynamic situation of system been disturbed, we extracted the real-time dynamic damping value of the observational section, calculated its fitting curve of local maximum points and took the slope of curve as the criteria, in order to achieve early warning of low frequency oscillation under multiple disturbances in the interconnected power system.


Energies ◽  
2019 ◽  
Vol 12 (20) ◽  
pp. 3849
Author(s):  
Xiayun Duan ◽  
Yifeng Ding ◽  
Huanna Niu ◽  
Yuzhu Wang

For the correction problem of day-ahead plan deviation caused by energy prediction deviation in day-ahead scheduling stage of photovoltaic greenhouses, an exergy analysis method is used to propose the deviation model of heat required for photovoltaic greenhouses. Based on the deviation model, a real-time optimization scheduling model is established. The deviation model not only considers the non-negligible exergy loss during heating process of pipes, but also considers the difference between heat and thermal exergy affected by the actual indoor temperature. The goal of the real-time scheduling model is to minimize the absolute value of the difference between the energy supply and demand prediction deviation to be corrected and the adjustment of multi-form energy storage and electric loads, so that develop the real-time adjustment plan of energy storage and electric loads. The analysis results of the actual photovoltaic greenhouse show that of the heat required by a greenhouse based on the exergy theory calculation, the exergy loss of the heating process accounts for about 10%–20% of the total thermal exergy required and it cannot be ignored, so the calculation results can reflect the actual heat required more accurately and the greenhouse temperature is more suitable for plant growth. Moreover, the proposed real-time scheduling model can correct the deviation of the day-ahead plan and improve local consumption. The promotion ratio can reach 7%. Finally, the farmers’ electricity purchases cost is reduced. Thereby the effectiveness of the proposed heat deviation model and real-time scheduling model is verified.


Sign in / Sign up

Export Citation Format

Share Document