The real-time dynamic heuristic scheduling for complex production planning

Author(s):  
Yiping Yuan ◽  
Wenlei Sun ◽  
Ying Zhu
2015 ◽  
Vol 734 ◽  
pp. 487-490
Author(s):  
Yu Luo ◽  
Wei Long ◽  
Si Jian Lin ◽  
Jiang Huang

According to the characteristics of multi-targets, multi-constraints, and solving difficulties in the aviation manufacturing production planning, the hypercube paths link algorithm based on the basic unit is proposed which is judged by the input and output. A simplified scheduling model is proposed to solve the real-time dynamic link path, which could improve the agility of the organization form of the workshop, and provide a new algorithm for the MES production scheduling. Finally ,the feasibility is verified by an algorithm example.


2021 ◽  
Vol 343 ◽  
pp. 03005
Author(s):  
Florina Chiscop ◽  
Bogdan Necula ◽  
Carmen Cristiana Cazacu ◽  
Cristian Eugen Stoica

The topic of this paper represents our research in the process of creating a virtual model (digital twin) for a fast-food company production chain starting with the moment when a customer launches an order, following with the processing of that order, until the customer receives it. The model will describe elements that are included in this process such as equipment, human resources and the necessary space that is needed to host this layout. The virtual model created in a simulation platform will be a replicate of a real fast-food company, thus helping us observe the real time dynamic of this production system. Using WITNESS HORIZON 23 we will construct the model of the layout based on real time data received from the fast-food company. This digital twin will be used to manage the production chain material flow, evaluating the performance of the system architecture in various scenarios. In order to obtain a diagnosis of the system’s performance we will simulate the workflow running through preliminary architecture in compliance with the real time behaviour to identify the bottlenecks and blockages in the flow trajectory. In the end we will propose two different optimised architectures for the fast-food company production chain.


Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4999
Author(s):  
Xuejun Zheng ◽  
Shaorong Wang ◽  
Xin Su ◽  
Mengmeng Xiao ◽  
Zia Ullah ◽  
...  

The investigation of real-time dynamic behavior evaluation in the active distribution networks (ADNs) is a challenging task, and it has great importance due to the emerging trend of distributed generations, electric vehicles, and flexible loads integration. The advent of new elements influences the dynamic behavior of the electric distribution networks and increases the assessment complexity. However, the proper implementation of low-cost phasor measurement units (PMUs) together with the development of power system applications offer tremendous benefits. Therefore, this paper proposes a PMU-based multi-dimensional dynamic index approach for real-time dynamic behavior evaluation of ADNs. The proposed evaluation model follows the assessment principles of accuracy, integrity, practicability, and adaptability. Additionally, we introduced low-cost PMUs in the assessment model and implemented them for real-time and high-precision monitoring of dynamic behaviors in the entire distribution network. Finally, a complete model called the real-time dynamic characteristics evaluation system is presented and applied to the ADN. It is pertinent to mention that our proposed evaluation methodology does not rely on the network topology or line parameters of the distribution network since only the phasor measurements of node voltage and line current are involved in the dynamic index system. Thus, the presented methodology is well adaptive to different operation states of ADN despite frequent topology changes. The validation of the proposed approach was verified by conducting simulations on the modified IEEE 123-node distribution network. The obtained results verify the effectiveness and relevance of the proposed model for the real-time dynamic behavior evaluation of ADNs.


2012 ◽  
Vol 433-440 ◽  
pp. 7465-7470
Author(s):  
Chao Dong ◽  
Di Chen Liu ◽  
Zhen Chuan Du ◽  
Qing Fen Liao ◽  
Lei Yun ◽  
...  

This paper set up the model of power transmissive observational section and put forward the real-time tracking method of power angle curve in steady state which could be used to identify and focus on monitoring the weak links, then to take early warnings of low frequency oscillation. On the dynamic situation of system been disturbed, we extracted the real-time dynamic damping value of the observational section, calculated its fitting curve of local maximum points and took the slope of curve as the criteria, in order to achieve early warning of low frequency oscillation under multiple disturbances in the interconnected power system.


2021 ◽  
Vol 163 (A3) ◽  
Author(s):  
Y Du ◽  
Y Y Wang ◽  
X C Shang ◽  
J B Zhang ◽  
M L Duan

To train inexperienced workers for the construction, production, and maintenance of subsea production systems, a virtual reality simulation platform was developed. The entire framework, software, and hardware platforms of the system were designed and introduced. A multi-person collaborative simulation was achieved based on the high-level architecture protocol. The real-time dynamic calculation software Vortex was used to add physical properties to each geometrical model and set collision detections and motion constraints so that the VR system can reflect the real motion response of the structures in real-time during virtual simulation. Visual simulation software Vega Prime and Vortex were integrated to realise the real-time rendering and drawing of virtual ocean engineering scenes. Thus, a virtual simulation system with large-scale complex scenes based on real-time dynamic calculation and multi-person collaborative operation was established. A typical ocean engineering case of subsea manifold installation was simulated using the virtual simulation system, and the detailed simulation flow was explained. A multibody dynamics system of the ship-cable-subsea manifold was established using Orcaflex to obtain the accurate motion response of the subsea manifold during lowering. In the virtual simulation process, the obtained hydrodynamic calculation results can provide an important guideline and reference to the operators. The developed simulation system is a suitable tool for training ocean engineering workers and realistically simulating ocean operation cases.


2014 ◽  
Vol 44 (S1) ◽  
pp. 110-110
Author(s):  
U. Menakaya ◽  
S. Reid ◽  
F. Infante ◽  
C. Phua ◽  
A. Model ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document