Unprotected Loss of Flow Accident in Small Long Life Gas Cooled Fast Reactor

2015 ◽  
Vol 751 ◽  
pp. 263-267
Author(s):  
Su'ud Zaki
Keyword(s):  
Nuclear Power ◽  
Cooling System ◽  
Natural Circulation ◽  
Heat Removal ◽  
Reducing Power ◽  
Inherent Safety ◽  
Fast Reactors ◽  
Transient Model ◽  
Long Life ◽  
Heat Removal System

In post Fukushima nuclear accidents inherent safety capability is necessary against some standard accidents such as unprotected loss of flow (ULOF), unprotected rod run-out transient over power (UTOP), unprotected loss of heat sink (ULOHS). Gas cooled fast reactors is one of the important candidate of 4th generation nuclear power plant and in this paper the safety analysis related to unprotected loss of flow in small long life gas cooled fast reactors has been performed. Accident analysis of unprotected loss of flow include coupled neutronic and thermal hydraulic analysis which include adiabatic model in nodal approach of time dependent multigroup diffusion equations. The thermal hydraulic model include transient model in the core, steam generator, and related systems. Natural circulation based heat removal system is important to ensure inherent safety capability during unprotected accidents. Therefore the system similar to RVACS (reactor vessel auxiliary cooling system) is investigated. As the results some simulations for small 60 MWt gas cooled fast reactors has been performed and the results show that the reactor can anticipate complete pumping failure inherently by reducing power through reactivity feedback and remove the rest of heat through natural circulations.

Preliminary Analysis of Unprotected Loss of Heat Sink in Small Long Life Gas Cooled Fast Reactor

2015 ◽  
Vol 751 ◽  
pp. 268-272
Author(s):  
Su'ud Zaki ◽  
Nuri Trianti ◽  
Rosidah M. Indah
Keyword(s):  
Fast Reactor ◽  
Heat Sink ◽  
Channel Model ◽  
Cooling System ◽  
Hot Spot ◽  
Natural Circulation ◽  
Heat Removal ◽  
Reducing Power ◽  
Secondary System ◽  
Heat Removal System

The failure of the secondary side in Gas Cooled Fast Reactor system, which may contain co-generation system, will cause loss of heat sink (LOHS) accident. In this study accident analysis of unprotected loss of heat sink due to the failure of the secondary cooling system has been investigated. The thermal hydraulic model include transient hot spot channel model in the core, steam generator, and related systems. Natural circulation based heat removal system is important to ensure inherent safety capability during unprotected accidents. Therefore the system similar to RVACS (reactor vessel auxiliary cooling system) is also plays important role to limit the level of consequence during the accident. As the results some simulations for small 60 MWt gas cooled fast reactors has been performed and the results show that the reactor can anticipate the failure of the secondary system by reducing power through reactivity feedback and remove the rest of heat through natural circulations based decay heat removal (RVACS system).

Optimization of Small Long Life Gas Cooled Fast Reactors with Natural Uranium as Fuel Cycle Input

2012 ◽  
Vol 260-261 ◽  
pp. 307-311 ◽  
Author(s):  
Menik Ariani ◽  
Z. Su'ud ◽  
Fiber Monado ◽  
A. Waris ◽  
Khairurrijal ◽  
...  
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Fuel Cycle ◽  
Volume Fraction ◽  
Natural Circulation ◽  
Average Power ◽  
Natural Uranium ◽  
Energy Utilization ◽  
Fast Reactors ◽  
Long Life

In this study gas cooled reactor system are combined with modified CANDLE burn-up scheme to create small long life fast reactors with natural circulation as fuel cycle input. Such system can utilize natural Uranium resources efficiently without the necessity of enrichment plant or reprocessing plant. Therefore using this type of nuclear power plants optimum nuclear energy utilization including in developing countries can be easily conducted without the problem of nuclear proliferation. In this paper, optimization of Small and Medium Long-life Gas Cooled Fast Reactors with Natural Uranium as Fuel Cycle Input has been performed. The optimization processes include adjustment of fuel region movement scheme, volume fraction adjustment, core dimension, etc. Due to the limitation of thermal hydraulic aspects, the average power density of the proposed design is selected about 75 W/cc. With such condition we investigated small and medium sized cores from 300 MWt to 600 MWt with all being operated for 10 years without refueling and fuel shuffling and just need natural Uranium as fuel cycle input. The average discharge burn-up is about in the range of 23-30% HM.

Study of the Behaviors of an Open-Loop Heat-Removal System

2018 ◽  
Author(s):  
Xianmao Wang ◽  
Yonggang Shen ◽  
Jiang Yang ◽  
Yong Ouyang ◽  
Min Rui ◽  
...  
Keyword(s):  
Cooling System ◽  
Natural Circulation ◽  
Heat Removal ◽  
Calculation Model ◽  
Open Loop ◽  
Cooling Systems ◽  
Core Cooling ◽  
Passive Cooling Systems ◽  
Heat Removal System ◽  
Removal System

In the third generation of nuclear reactors, passive systems have been widely used such as passive core cooling system and passive containment cooling system, which usually relay on natural circulation induced by buoyancy force to remove heat. Most of these passive cooling systems are closed-loop natural circulations. In recent years, some open-loop heat-removal systems have also been put forward. Open-loop heat-removal systems have its own advantages such as its simplification and low costs. However, the thermal-hydraulic behaviors of open-loop heat-removal systems are still not totally clear and need further study. In this study, a simplified open-loop passive containment cooling system is studied. A calculation model is built based on RELAP SCDAPSIM code. The thermal-hydraulic behaviors of the system are studied. By changing some key parameters of the system, the influences of these parameters on the system are evaluated.

scholarly journals Design, Experiment, and Commissioning of the Passive Residual Heat Removal System of China’s Generation III Nuclear Power HPR1000

2021 ◽  
Vol 2021 ◽  
pp. 1-6
Author(s):  
Feng Li ◽  
Yazhe Lu ◽  
Xiao Chu ◽  
Qiang Zheng ◽  
Guanghao Wu
Keyword(s):  
Nuclear Power ◽  
Natural Circulation ◽  
Heat Removal ◽  
Two Phase ◽  
Safe State ◽  
Station Blackout ◽  
Run Test ◽  
Heat Removal System ◽  
Removal System ◽  
Residual Heat

In response to a station blackout accident similar to the Fukushima nuclear accident, China’s Generation III nuclear power HPR1000 designed and developed a passive residual heat removal system connected to the secondary side of the steam generator. Based on the two-phase natural circulation principle, the system is designed to bring out long-term core residual heat after an accident to ensure that the reactor is in a safe state. The steady-state characteristic test and transient start and run test of the PRS were carried out on the integrated experiment bench named ESPRIT. The experiment results show that the PRS can establish natural circulation and discharge residual heat of the first loop. China’s Fuqing no. 5 nuclear power plant completed the installation of the PRS in September 2019 and carried out commissioning work in October. This debugging is the first real-world debugging of the new design. This paper introduces the design process of the PRS debugging scheme.

The Choose of Decay Heat Removal Systems of SFR

2018 ◽  
Author(s):  
Nina Yue ◽  
Rong Cai ◽  
Yun Wang ◽  
Suizheng Qiu ◽  
Dalin Zhang
Keyword(s):  
Fast Reactor ◽  
Large Scale ◽  
Cooling System ◽  
Natural Circulation ◽  
Heat Removal ◽  
Decay Heat ◽  
Station Blackout ◽  
The One ◽  
Safety Systems ◽  
Heat Removal System

A sodium-cooled fast reactor is a significant candidate for future power reactor systems. Decay heat removal is an essential function of reactor safety systems The decay heat removal system should have the capacity to remove the decay heat with natural circulation in any accident. There are three types of decay heat removal systems, namely direct reactor auxiliary cooling system, primary reactor auxiliary cooling system, and intermediate reactor auxiliary cooling system. The one dimensional systems analysis code THACS was applied to conduct transient analyses of a sodium-cooled fast reactor, and the capabilities of three types of decay heat removal systems against a station blackout accident were compared. The results indicate that these three types of decay heat removal systems can remove the residual heat effectively. For large-scale sodium-cooled fast reactor, the capabilities of primary reactor auxiliary cooling system and intermediate reactor auxiliary cooling system were better, because the cold sodium from the penetrating heat exchanger in these two auxiliary cooling systems could directly flow into the core assemblies.

Analysis of Passive Residual Heat Removal System at Primary Side when Station Blackout Occurs

2014 ◽  
Vol 986-987 ◽  
pp. 231-234
Author(s):  
Jun Teng Liu ◽  
Qi Cai ◽  
Xia Xin Cao
Keyword(s):  
Nuclear Reactor ◽  
Natural Circulation ◽  
Reactor Core ◽  
Saturation Temperature ◽  
Heat Removal ◽  
Primary Circuit ◽  
Station Blackout ◽  
Heat Removal System ◽  
Removal System ◽  
Residual Heat

This paper regarded CNP1000 power plant system as the research object, which is the second-generation half Nuclear Reactor System in our country, and tried to set Westinghouse AP1000 passive residual heat removal system to the primary circuit of CNP1000. Then set up a simulation model based on RELAP5/MOD3.2 program to calculate and analyze the response and operating characteristic of passive residual heat removal system on assumption that Station Blackout occurs. The calculation has the following conclusions: natural circulation was quickly established after accident, which removes core residual heat effectively and keep the core safe. The residual heat can be quickly removed, and during this process the actual temperature was lower than saturation temperature in reactor core.

scholarly journals Simulation of Steady States of Helium Loop at Long Time Scenarios

2020 ◽  
Vol 328 ◽  
pp. 01009
Author(s):  
František Világi ◽  
Branislav Knížat ◽  
Róbert Olšiak ◽  
Marek Mlkvik ◽  
Peter Mlynár ◽  
...  
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Reactor ◽  
Natural Circulation ◽  
Heat Removal ◽  
Iteration Process ◽  
Heat Accumulation ◽  
Proposed Model ◽  
Long Time ◽  
Convection Cooling

The natural circulation helium loop is an experimental facility designed for the research of the possibility of utilizing natural convection cooling for the case of decay heat removal from a fast nuclear reactor. This concept would bring an improved automated safety system for future nuclear power plants operating a gas-cooled reactor. The article presents a new possibility of direct use of energy conservation laws in a 1D simulation of natural circulation loops. The calculation is performed by a triple iteration process, nested into each other. The results of the calculations showed good agreement with the measurements at steady state. A calculation with the proposed model at unsteady state is not yet possible, especially because of the exclusion of heat accumulation into the material.

scholarly journals Effect of Coolant Inventories and Parallel Loop Interconnections on the Natural Circulation in Various Heat Transport Systems of a Nuclear Power Plant during Station Blackout

2008 ◽  
Vol 2008 ◽  
pp. 1-11 ◽  
Author(s):  
Avinash J. Gaikwad ◽  
P. K. Vijayan ◽  
Sharad Bhartya ◽  
Kannan Iyer ◽  
Rajesh Kumar ◽  
...  
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Heat Transport ◽  
Nuclear Power ◽  
Natural Circulation ◽  
Heat Removal ◽  
Transport Systems ◽  
Critical Examination ◽  
Decay Heat ◽  
Station Blackout

Provision of passive means to reactor core decay heat removal enhances the nuclear power plant (NPP) safety and availability. In the earlier Indian pressurised heavy water reactors (IPHWRs), like the 220 MWe and the 540 MWe, crash cooldown from the steam generators (SGs) is resorted to mitigate consequences of station blackout (SBO). In the 700 MWe PHWR currently being designed an additional passive decay heat removal (PDHR) system is also incorporated to condense the steam generated in the boilers during a SBO. The sustainability of natural circulation in the various heat transport systems (i.e., primary heat transport (PHT), SGs, and PDHRs) under station blackout depends on the corresponding system's coolant inventories and the coolant circuit configurations (i.e., parallel paths and interconnections). On the primary side, the interconnection between the two primary loops plays an important role to sustain the natural circulation heat removal. On the secondary side, the steam lines interconnections and the initial inventory in the SGs prior to cooldown, that is, hooking up of the PDHRs are very important. This paper attempts to open up discussions on the concept and the core issues associated with passive systems which can provide continued heat sink during such accident scenarios. The discussions would include the criteria for design, and performance of such concepts already implemented and proposes schemes to be implemented in the proposed 700 MWe IPHWR. The designer feedbacks generated, and critical examination of performance analysis results for the added passive system to the existing generation II & III reactors will help ascertaining that these safety systems/inventories in fact perform in sustaining decay heat removal and augmenting safety.

Sign in / Sign up

Export Citation Format

Share Document