The Seismic Performance Analysis of the Abnormal Joints Core Area of the Reinforced Concrete Frame Variable Beam Shaped

2014 ◽  
Vol 1008-1009 ◽  
pp. 1326-1329
Author(s):  
Shu Dian Yao ◽  
Fu Ma
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Reinforced Concrete ◽  
Shear Failure ◽  
Mechanical Performance ◽  
Reinforced Concrete Beam ◽  
Core Area ◽  
Reinforced Concrete Frame ◽  
Element Analysis ◽  
Concrete Frame

The finite element analysis software-ANYSIS is used to calculate and analyze the deformation and mechanical performance of the abnormal joints core zone of variable beam shaped (reinforced concrete beam) under the positive and negative symmetric loads (simulate earthquake loads) . With the method of control variables, multiple finite element analysis models are set up and the focus is to explore the crack development, stress distribution and failure pattern in different stages. The compared conclusion shows that the shear failure of small joint core is the key to the whole joints core area for variable beam shaped.

Different Design Parameters Analysis of Unbonded Precast Reinforced Concrete Frame Structure

2012 ◽  
Vol 446-449 ◽  
pp. 695-698
Author(s):  
Jian Qiang Han ◽  
Xiu Yan Fu ◽  
Jiang Ming Tang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Reinforced Concrete ◽  
Load Test ◽  
Frame Structure ◽  
Design Parameters ◽  
Hysteresis Curve ◽  
Reinforced Concrete Frame ◽  
Element Analysis ◽  
Concrete Frame

This thesis studies deeply the crack development characteristics, failure pattern, hysteresis curve and the displacement ductility of unbonded precast reinforced concrete frame, by analyzing one unbonded precast reinforced concrete frame under low reversed cyclic load test. We build a model using finite element analysis software to the test piece model analysis, the analysis result agree well with the experimental results. So we build finite element analysis models with different design parameters to analysis the impaction for seismic performance. Numerical analysis results can provide a scientific reference for the unbonded precast frame structure design.

Research on the Nonlinearity Finite Element in the Super-Long Reinforced Concrete Frame Structure

2014 ◽  
Vol 1065-1069 ◽  
pp. 1226-1229
Author(s):  
Yong Sheng Zhang ◽  
Yan Ying Li
Keyword(s):  
Finite Element ◽  
Reinforced Concrete ◽  
Internal Force ◽  
Frame Structure ◽  
Reinforced Concrete Frame ◽  
Engineering Project ◽  
Element Analysis ◽  
Concrete Frame ◽  
Temperature Load ◽  
Reinforced Concrete Frame Structure

Basing on the finite element analysis software, the emergence of crack under the effect of gradual changed temperature load and the change of stress which are in the condition of super reinforced concrete frame structure are analyzed from the linear and nonlinear numeral simulation. The simulation shows that the structure component under the normal condition is cracked and turn into the nonlinear condition and the steel bars still works under the elastic stage. Meanwhile the actual stage which is reflected by the elastic-plastic analysis of the internal force and deformation is compared by the results which are obtained by the actual project observed results and the calculation of the simplified model. So the distribution of the stress which is caused by the structure temperature reduction is greatly evaluated by the usage of the cracking model which is nonlinear finite element and also plays an important role in the engineering project and practice.

scholarly journals A NONLINEAR FINITE ELEMENT ANALYSIS OF PRECAST INDUSTRIALISED BUILDING SYSTEM BEAM UNDER FLEXURAL TEST

2019 ◽  
Vol 81 (3) ◽  
Author(s):  
Chun-Chieh Yip ◽  
Jing-Ying Wong ◽  
Ka-Wai Hor
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Reinforced Concrete ◽  
Concrete Beam ◽  
Failure Modes ◽  
Reinforced Concrete Beam ◽  
Shear Cracks ◽  
Flexural Test ◽  
Element Analysis ◽  
Failure Behaviour

Software simulation enables design engineers to have a better picture of possible structural failure behaviour and determine the accuracy of a design before the actual structural component is fabricated. Finite element analysis is used to simulate the behaviour of the reinforced concrete beam under the flexural test. During the flexural test, results are recorded for both simulation and experimental tests. By comparing the results, beam displacement, crack patterns, and failure modes can be studied with better accuracy. The accuracy percentage for yield load and ultimate load between the two tests results were 94.12 % and 95.79 %, respectively, whereas the accuracy percentage for elastic gradient before the yielding stage was 81.08 %. The behaviour between simulation and laboratory models described is based on crack pattern and failure mode. The progression of von Mises (VM) stresses highlighted the critical areas of the reinforced concrete beam and correlation between the experimental specimen, in terms of flexural cracks, shear cracks, yielding of tension reinforcement, and the crushing of concrete due to compressive stress. This paper concludes that simulation can achieve a significant accuracy in terms of loads and failure behaviour compared to the experimental model.

Sign in / Sign up

Export Citation Format

Share Document