Research on the Nonlinearity Finite Element in the Super-Long Reinforced Concrete Frame Structure

2014 ◽  
Vol 1065-1069 ◽  
pp. 1226-1229
Author(s):  
Yong Sheng Zhang ◽  
Yan Ying Li

Basing on the finite element analysis software, the emergence of crack under the effect of gradual changed temperature load and the change of stress which are in the condition of super reinforced concrete frame structure are analyzed from the linear and nonlinear numeral simulation. The simulation shows that the structure component under the normal condition is cracked and turn into the nonlinear condition and the steel bars still works under the elastic stage. Meanwhile the actual stage which is reflected by the elastic-plastic analysis of the internal force and deformation is compared by the results which are obtained by the actual project observed results and the calculation of the simplified model. So the distribution of the stress which is caused by the structure temperature reduction is greatly evaluated by the usage of the cracking model which is nonlinear finite element and also plays an important role in the engineering project and practice.

2012 ◽  
Vol 193-194 ◽  
pp. 1109-1112
Author(s):  
Li Ming Wu ◽  
Xiao Liang Luo ◽  
Zi Jian Wang

Taking a 5-story reinforced concrete frame structure on the transformed 3-layer steel frames for an example, use finite element software ANSYS to reformation as a whole building model under static wind load changes for comparative analysis of internal force and displacement of the corresponding node. Analysis results show that in the transformation of steel on reinforced concrete frame structure, should fully take into account the structural stiffness change on construction of the overall effect of wind resistance, so that the transformation of the steel concrete frame structure more reasonable.


2012 ◽  
Vol 446-449 ◽  
pp. 695-698
Author(s):  
Jian Qiang Han ◽  
Xiu Yan Fu ◽  
Jiang Ming Tang

This thesis studies deeply the crack development characteristics, failure pattern, hysteresis curve and the displacement ductility of unbonded precast reinforced concrete frame, by analyzing one unbonded precast reinforced concrete frame under low reversed cyclic load test. We build a model using finite element analysis software to the test piece model analysis, the analysis result agree well with the experimental results. So we build finite element analysis models with different design parameters to analysis the impaction for seismic performance. Numerical analysis results can provide a scientific reference for the unbonded precast frame structure design.


2012 ◽  
Vol 166-169 ◽  
pp. 172-175
Author(s):  
Chun Ming Wei ◽  
De Long Shao ◽  
Hui Su ◽  
Qiang Zhao

To investigate the effect of the horizontal construction joint on seismic behavior of the exterior joint of the reinforced concrete frame structure, the numerical simulation of the exterior joint with the construction joint under the low cyclic loading was done. The experimental results and the numerical simulation values were compared. Seen from the ultimate load, the experiment value is 158.7kN, the simulation value is 170kN, the relative error is about 11%.Further analysis of the exterior joint of reinforced concrete frame skeleton properties, the feasibility of applying unit construction joints is verified.


2012 ◽  
Vol 256-259 ◽  
pp. 689-692
Author(s):  
Hui Na Jia ◽  
Gao Wei Yue

In this paper the theoretical model of reinforced concrete frame structure is established to numerically simulate and analyze its overall morphology with the finite element analysis method. The calculation results shows that at the bottom of the structure the stress and deformation is much larger than other parts with the action of constant load, live load and wind load. And with modal analysis and buckling analysis natural frequency and vibration mode are obtained to avoid resonance and predict the buckling load.


2014 ◽  
Vol 1065-1069 ◽  
pp. 1254-1259
Author(s):  
Pei Li ◽  
Jian Xin Liu

On the basis of structural concept design, this paper puts forward a new braced controlled rocking reinforced concrete frame structure system, researching dynamic characteristics of the BCR-RCF structure when the joints is been weakened in different levels by using finite element analysis software Abaqus, analyzing the reasonable degree of rocking joints stiffness weakening. By comparing the dynamic response of conventional reinforced concrete frame and the BCR-RCF structure, it shows that the BCR-RCF structure can effectively reduce the structural shearing force and acceleration response, however, displacement and velocity response is bigger than RCF structure. Compared with the RCF structure, shearing force and displacement responses of the BCR-RCF are more evenly distributed along the floor, which helps preventing excessive concentration of interlaminar deformation, so that materials of every layer can be fully utilized. After adding metal damper into the BCR-RCF structure, the displacement response can be effectively controlled.


Sign in / Sign up

Export Citation Format

Share Document