Seismic Response Analysis of an Adsorption Tower Based on ANSYS

2010 ◽  
Vol 102-104 ◽  
pp. 150-154
Author(s):  
Xiao Ping Hu ◽  
Xiao Ping Ye
Keyword(s):  
Seismic Response ◽  
Seismic Analysis ◽  
Time History ◽  
Element Model ◽  
Response Analysis ◽  
Seismic Load ◽  
Engineering Practice ◽  
Current Standard ◽  
History Analysis ◽  
Tower Equipment

The seismic load usually has a significant hazard to the safety of the tower equipment, so it’s important to execute of seismic design in engineering practice. In this paper, the time history analysis of the seismic response is carried out with the help of ANSYS software for the finite element model of the adsorption tower. Relevant time history data is obtained. Compared with seismic analysis of the current standard method, corresponding suggestions are given.

Seismic Response Analysis of Container Crane

2012 ◽  
Vol 503-504 ◽  
pp. 1104-1107
Author(s):  
Shi Qing Lu ◽  
Han Bin Xiao ◽  
Ping Deng
Keyword(s):  
Seismic Response ◽  
Seismic Design ◽  
Large Scale ◽  
Time History ◽  
Element Model ◽  
Response Analysis ◽  
Container Cranes ◽  
Container Crane ◽  
Critical Nodes ◽  
History Analysis

Earthquakes pose a threat to large-scale container cranes. Previous earthquakes damaged many container cranes, which had a significant impact on business interruption losses of the port. In this paper, a container crane’s seismic response is analyzed in ANSYS. First, a finite element model of a container crane is developed. Then, based on the equations of structural dynamics, the four most important modes of the container crane are extracted. Finally, a time history analysis is conducted to obtain the displacements of some critical nodes on the crane model under the excitation of an earthquake wave. The result of this paper provides a reference for the seismic design of container cranes.

Seismic Response Analysis on Flat L-Shaped Frame Structure Based on FEM

2012 ◽  
Vol 166-169 ◽  
pp. 2138-2142
Author(s):  
Hui Min Wang ◽  
Liang Cao ◽  
Ji Yao ◽  
Zhi Liang Wang
Keyword(s):  
Seismic Response ◽  
Three Dimensional ◽  
Time History ◽  
Frame Structure ◽  
Response Analysis ◽  
Reinforced Concrete Frame ◽  
Seismic Response Analysis ◽  
Concrete Frame ◽  
History Analysis ◽  
Complex Features

For the complex features in the form of a flat L-shaped reinforced concrete frame structure, the three dimensional FEM model of the structure was established in this paper, and the dynamic characteristics of the structure was analyzed, the participation equivalent mass of every mode’s order was obtained. Seismic response analysis for the structure was carried out with modal decomposition spectrum method and time history analysis method, the weak layer of the structure was pointed out and the reference for the structural design was provided.

Seismic Analysis of Long Span Double-Curved Arch Bridge

2012 ◽  
Vol 594-597 ◽  
pp. 1532-1536
Author(s):  
Yun Zhang ◽  
Xiu Feng Huang ◽  
Bei Li
Keyword(s):  
Seismic Analysis ◽  
Response Spectrum ◽  
Time History ◽  
Element Model ◽  
Dynamic Features ◽  
Arch Bridge ◽  
Long Span ◽  
Crown Structure ◽  
History Analysis ◽  
Rare Earthquake

Take one long span double-curved arch bridge as the example, built the finite element model of bridge structure and analyzed the modeling method, dynamic features and response under ground motion. It demonstrates that response spectrum method could meet the calculation requirement in seismic analysis of the double-curved arch bridge, and the result accords with time-history analysis method. Bridge vibration type is dispersing in quality distribution of double-curved arch bridge; it should take adequate vibration types in bridge combination. At frequent earthquake, it is actual to considerate the coalition function between arch crown structure and the main arch ring. But at rare earthquake, the arch crown buildings of masonry structure is easy to be damaged, it is not suitable to considerate the coalition function in bridge reinforcement.

Seismic Response Analysis of Cable-Stayed Bridges

2012 ◽  
Vol 446-449 ◽  
pp. 2290-2294
Author(s):  
Wen Liang Qiu ◽  
Meng Jiang ◽  
Xing Bo Zhang
Keyword(s):  
Time History ◽  
Element Model ◽  
Response Analysis ◽  
Longitudinal Displacement ◽  
Seismic Responses ◽  
Cable Stayed Bridge ◽  
Optimum Parameters ◽  
History Analysis ◽  
Floating System ◽  
Main Bridge

For floating system cable-stayed bridge, the longitudinal displacement of stiffening girder and moments of towers are very large when strong earthquake happens. Too large displacement of stiffening girder leads to collision between girders of the main bridge and the approaches. Using spatial finite element model and time history analysis method, the seismic responses of cable-stayed bridge are studied considering the elasto-plastic effects. The results show that the displacement of stiffening girder is very large when no seismic reduction measures are adopted. The viscous dampers installed between the stiffening girder and towers can efficiently reduce seismic responses of the cable-stayed bridge. Especially, the displacement of stiffening girder can be controlled well to meet the design requirement. Using the optimum parameters of damper, the height of pier under tower and intermediate supports in side span on seismic responses are studied in detail. The longitudinal displacement of stiffening girder increases with the pier height increasing. The intermediate supports in side span are benefit for seismic reduction.

Space Seismic Response Analysis of City Elevated Curved Box Girders Bridge

2011 ◽  
Vol 255-260 ◽  
pp. 1096-1101
Author(s):  
Qing Zhao
Keyword(s):  
Seismic Response ◽  
Three Dimensional ◽  
Time History ◽  
Internal Force ◽  
Response Analysis ◽  
Box Girders ◽  
Element Analysis ◽  
History Analysis ◽  
The Finite Element Analysis ◽  
Time History Response

Taking an engineering design case about a city elevated curved box girders bridge, the dynamic calculating model of the curved box girders bridge is created by the finite element analysis program ANSYS. The analysis of curved box girders bridge with space seismic response are discussed, and a time history analysis is conducted for the curved box girders bridge subjected to the E1 Centro earthquake waves in two conditions.The internal force and the displacement time history response curve of the curved box girders bridge are obtained. The results indicate that the seismic response of curved box girders bridge with three-dimensional earthquake are bigger than two-dimensional, and consider the vertical seismic have considerable influence on the axial force of bridge piers, the internal force and displacement of box girders.

scholarly journals Formulation of Performance Levels and Relevant Limitations for Clay Brick Masonry Infills in Seismic Analysis of R/C Frame Structures

2021 ◽  
Vol 1203 (3) ◽  
pp. 032043
Author(s):  
Iacopo Costoli ◽  
Stefano Sorace ◽  
Gloria Terenzi
Keyword(s):  
Seismic Response ◽  
Seismic Analysis ◽  
Central Italy ◽  
Time History ◽  
Element Model ◽  
Brick Masonry ◽  
Frame Structures ◽  
Hysteretic Model ◽  
Backbone Curve ◽  
Plane State

Abstract Observation of damage caused by recent earthquakes highlights, once again, that the presence of infills significantly affects the seismic response of reinforced concrete (R.C.) frame buildings. Therefore, in spite of the fact that infills are non-structural elements, and thus they are normally not considered in structural analyses, in many cases their contribution should not be neglected. Based on these observations, the study proposed in this paper consists in the evaluation of the seismic response of infills in time-history finite element analyses of R.C. frame structures by means of a two-element model, constituted by two diagonal nonlinear beams. A “concrete”-type hysteretic model predicts the in-plane state of infills, through a force-displacement backbone curve expressly generated, and scanned in terms of performance limits, to this aim. This model is demonstratively applied to a real case study, i.e. a R.C. frame building including various types of brick masonry perimeter infills and internal partitions, damaged by the 30 October 2016 Central Italy earthquake. The time-histories seismic analyses carried out on it allows checking the influence of infills on the response of the structure, as well the effectiveness of the proposed model in reproducing the observed real damage on the masonry panels.

Dynamic Response Analysis of Tailings Dam under Seismic Action

2015 ◽  
Vol 799-800 ◽  
pp. 746-750
Author(s):  
Ai Min Gong ◽  
Hai Yan Huang ◽  
Hui Ying Zhang
Keyword(s):  
Dynamic Stability ◽  
Time History ◽  
Reference Value ◽  
Element Model ◽  
Dynamic Responses ◽  
Response Analysis ◽  
Seismic Load ◽  
Seismic Action ◽  
Tailings Dam ◽  
Dynamic Time

A finite element model of tailiings dam was used to analyze the dynamic responses of the stress field, displacement and acceleration of the dam with the dynamic time-history response analysis method in this paper. The time-history curves of different responses were obtained. And an evaluation for dynamic stability of the tailings dam was also discussed. The analysis result shows that this case can provide a certain reference value for the dynamic calculation and the dynamic stability analysis of tailings dam under seismic load.

Study on Piping Response Under Multiple Excitation Validation for Elastic-Plastic Analysis of Piping

2014 ◽  
Author(s):  
Satoru Kai ◽  
Tomoyoshi Watakabe ◽  
Naoaki Kaneko ◽  
Kunihiro Tochiki ◽  
Makoto Moriizumi ◽  
...  
Keyword(s):  
Plastic Deformation ◽  
Seismic Response ◽  
Nuclear Power ◽  
Time History ◽  
Large Earthquake ◽  
Response Analysis ◽  
Analysis Method ◽  
Elastic Plastic ◽  
History Analysis ◽  
Plastic Analysis

Piping in a nuclear power plant is usually laid across several floors of a single building or adjacent buildings, and is supported at many points. As the piping is excited by a large earthquake through multiple supporting points, seismic response analysis by multiple excitations within the range of plastic deformation of piping material is necessary to obtain the precise seismic response of the piping. The verification of the dynamic analysis method of piping under an elastic domain, which is excited by multiple seismic inputs, was performed in our study last year and the correspondence of a piping response between an analysis and an experiment have been confirmed [17][18]. However, few experiments under plastic deformation conditions have been performed to verify the validity of multiple excitation analysis under a plastic deformation range. To obtain better understanding of the behavior of piping under a large seismic input, it is important to investigate the seismic response by multiple excitations and to verify the validity of the analytical method by multiple excitation experiments. This paper reports the validation results of the seismic elastic-plastic time history analysis of piping compared with the results of the shaking test of a 3-dimensional piping model under a plastic deformation range using triple uni-axial shake table. Three directional strains from the analysis and the experiments were compared in order to validate the analysis method. As a result, it is confirmed that the elastic-plastic analysis by time history excitation shows good agreement with the test results.

scholarly journals Seismic Response Analysis of Prestressed Concrete Rocking Frame

2021 ◽  
Vol 11 (2) ◽  
pp. 585
Author(s):  
Zixiang Zhao ◽  
Xiaozu Su
Keyword(s):  
Theoretical Model ◽  
Seismic Response ◽  
Prestressed Concrete ◽  
Seismic Behavior ◽  
Time History ◽  
Equation Of Motion ◽  
Parameter Analysis ◽  
Response Analysis ◽  
Seismic Response Analysis ◽  
History Analysis

In order to investigate the seismic performance of prestressed concrete rocking frame (PCRF), a theoretical model based on rigid body is established for a one-story single-span PCRF. The PCRF studied in this paper has the connecting interfaces set at the column feet and at the inner faces of the beam–column joints, allowing the columns to be uplifted with the accompanying separation of the beam–column interface and rotation of the beam and column around the interface. The tendons are arranged along the centerline of the beam and columns. The connections between the beam and columns and the anchoring of columns are accomplished by prestressing the tendons. The theoretical model consists of a rigid beam, rigid columns and elastic tendons. The governing motion equation of the PCRF is derived based on the model and a numerical solution of the equation of motion is obtained. The energy dissipation of the PCRF is analyzed and the calculation method for the coefficient of restitution is derived. Time history analysis and parameter analysis of seismic response of the PCRF are conducted and the results show that the PCRF has promising seismic behavior.

Seismic Response Analysis of the Transfer Station in Transportation Junction Considering the Effect of the Pile and Soil

2012 ◽  
Vol 166-169 ◽  
pp. 2202-2208
Author(s):  
Ye Guan ◽  
Xin Liang Jiang ◽  
Yan Ping Zhang
Keyword(s):  
Cross Sections ◽  
Underground Structure ◽  
Complex Structure ◽  
Time History ◽  
Element Model ◽  
Response Analysis ◽  
Seismic Load ◽  
Spring Element ◽  
Transfer Station ◽  
Foundation Model

In order to understand the seismic performance of the large complex structure with multi-storey basement, the structure-pile-soil finite element model of a typical cross sections of one transfer station in a transportation junction were established by using the ANSYS software. The time history analysis was adopted, and the seismic responds of the whole system under the seismic load was analyzed, and some rules were attained. Comparing the result of the seismic responds with the rigid foundation model which the soil around the underground structure simulated by spring element, and some salutary conclusions are attained.

Sign in / Sign up

Export Citation Format

Share Document