Corrosion Inhibition of Mild Steel by Benzotriazoliumionic Liquid in Hydrochloric Acid

2011 ◽  
Vol 239-242 ◽  
pp. 1409-1413
Author(s):  
Hong Mei Wang ◽  
Ke Long Huang ◽  
Zhi Ping Zhu
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibition ◽  
Potentiodynamic Polarization ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Polarization Data ◽  
Impedance Measurements ◽  
Mild Steel Corrosion ◽  
Mixed Type Inhibitor

The inhibiting behavior of 1-ethyl-3-butylbenzotriazolium ionic liquids，[C2Bt][Br] ,on mild steel corrosion in 5 wt.% HCl as corroding solution was investigated using weight loss，potentiodynamic polarization and electrochemical impedance measurements. The obtained results indicated that [C2Bt][Br] is a good inhibitor for the mild steel in 5 wt.% HCl solution. The inhibition efficiency increased with an increase of inhibitive concentration. Potentiodynamic polarization data indicated that the [C2Bt][Br] acted essentially as a mixed-type inhibitor. The electrochemical impedance study showed that corrosion inhibition took place by adsorption.

scholarly journals Inhibiting Effects of Rabeprazole Sulfide on the Corrosion of Mild Steel in Acidic Chloride Solution

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
M. K. Pavithra ◽  
T. V. Venkatesha ◽  
M. K. Punith Kumar
Keyword(s):  
Mild Steel ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Protection Efficiency ◽  
Langmuir Adsorption ◽  
Kinetic And Thermodynamic Parameters ◽  
Mild Steel Corrosion ◽  
Acidic Chloride Solution ◽  
Acidic Chloride ◽  
Mixed Type Inhibitor

The corrosion inhibition effect of Rabeprazole sulfide (RS) on mild steel in 1 M hydrochloric acid (HCl) was investigated using weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and chronoamperometric measurements. Protection efficiency of RS increases with the concentration and decreases with the rise in temperature. Adsorption of RS on mild steel surface in 1 M HCl follows Langmuir adsorption isotherm. The kinetic and thermodynamic parameters governing the adsorption process were calculated and discussed. The polarization results suggest that RS performed as an excellent mixed-type inhibitor for mild steel corrosion in 1 M HCl.

scholarly journals Mitigation of Mild Steel Corrosion in Acidic Solution Using Inhibitor

2011 ◽  
Vol 8 (s1) ◽  
pp. S53-S60 ◽  
Author(s):  
M. Vishnudevan
Keyword(s):  
Mild Steel ◽  
Sodium Benzoate ◽  
Inhibition Efficiency ◽  
Acidic Solution ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Trisodium Citrate ◽  
Tafel Polarization ◽  
Mild Steel Corrosion ◽  
Maximum Inhibition

The inhibition efficiency of mild steel corrosion in HCl acidic solution containing various concentrations of mixed inhibitors were evaluated by conducting Tafel polarization and electrochemical impedance studies. The mixed inhibitors used in this present investigation were trisodium citrate and sodium benzoate. In this present investigation 0.01 N to 0.1 N concentrations of HCl was used at 30°C. Sodium benzoate present in the mixed inhibitive system enhanced the inhibition efficiency through chemisorptions. The maximum inhibition efficiency ( 95.4%) was obtained for the mixed inhibitive system containing 0.05 M citrate and 0.5 M benzoate in 0.1 N HCl.

Inhibition of Steel Corrosion in Sulfuric Acid Solution by 1,10-Phenanthroline, para-Aminobenzoate and their Corresponding Manganese Complex

2019 ◽  
Vol 233 (11) ◽  
pp. 1553-1569 ◽  
Author(s):  
Rola N. Tabesh ◽  
Ashraf Moustafa Abdel-Gaber ◽  
Hassan H. Hammud ◽  
Rami Al-Oweini
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibition ◽  
Electrochemical Impedance ◽  
Activation Parameters ◽  
Steel Corrosion ◽  
Inhibition Mechanism ◽  
Acidic Solutions ◽  
Mild Steel Corrosion ◽  
Uv Visible ◽  
Adsorptive Properties

Abstract The ligands 1,10-phenanthroline, (P) and para-aminobenzoate, (B); as well as their corresponding MnPB complex [bis-(dimanganese di-μ-paraaminobenzoate dichloro diphenanthroline)] have been investigated as inhibitors of mild steel corrosion in H2SO4 (0.5 M) solutions via potentiodynamic and electrochemical impedance spectroscopy techniques. Stability of the prepared complex was examined by UV-visible spectroscopy. The corrosion inhibition, thermodynamics, and adsorptive properties obtained have shown that MnPB complex has remarkable effects in the acidic solutions. Theoretical fitting of different adsorption isotherms such as Langmuir, Flory–Huggins, and the kinetic-thermodynamic models were tested and the thermodynamic activation parameters were calculated. The data revealed that the corrosion inhibition mechanism of mild steel in acidic solutions by the MnPB complex goes via physicochemical adsorption.

scholarly journals Corrosion Inhibition of Mild Steel in 0.5 M H2SO4 Using Ethanol Extract of Funtumia elastica

2016 ◽  
Vol 68 ◽  
pp. 24-38 ◽  
Author(s):  
Chinonso Blessing Adindu ◽  
Emeka Emmanuel Oguzie ◽  
Cynthia E. Ogukwe
Keyword(s):  
Mild Steel ◽  
Potentiodynamic Polarization ◽  
Density Functional ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Ethanol Extract ◽  
Density Functional Theory Calculations ◽  
Spectroscopic Techniques ◽  
Mild Steel Corrosion ◽  
Individual Contributions

The adsorption and corrosion inhibitive effect of the ethanol extract ofFuntumia elastica(FE) leaves on mild steel corrosion in 0.5 M H2SO4was studied using gravimetric, potentiodynamic polarization and electrochemical impedance spectroscopic techniques. As well as Fourier transform infrared spectroscopy and computational methods. The gravimetric and electrochemical studies revealed that FE is an adsorption inhibitor. The potentiodynamic polarization result showed that the inhibitor is a mixed type corrosion inhibitor for mild steel in 0.5 M H2SO4, inhibiting both the cathodic and anodic partial reactions. Density functional theory calculations were performed to model the electronic structures of some selected extract constituents (conessine, and ascorbic acid) to confirm their inhibiting potential and established their individual contributions to the observed inhibiting effects.

scholarly journals Assessment on the Effective Green-Based Nepal Origin Plants Extract as Corrosion Inhibitor for Mild Steel in Bioethanol and its Blend

2020 ◽  
Vol 1 (5) ◽  
Author(s):  
Prakash Katuwal ◽  
Ramesh Regmi ◽  
Susan Joshi ◽  
Jagadeesh Bhattarai
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibition ◽  
Adsorption Isotherms ◽  
Inhibition Efficiency ◽  
Steel Corrosion ◽  
Inhibition Mechanism ◽  
Mild Steel Corrosion ◽  
Effective Inhibition ◽  
Commercial Gasoline ◽  
Polarization Studies

Effects of Nepal origin plant species of Vitex negundo, Catharanthus roseu, Aegle marmelos and Elaeocarpus ganitrus extracts on mild steel corrosion were explored in bioethanol (E100) and its blend (E15) in airtight condition at 25±2 °C using static immersion, inhibition efficiency and mechanism tests which were complemented with adsorption isotherms and potentiodynamic polarization studies. Corrosion resistance of the mild steel was increased with increasing 500-2000 ppm concentrations of each plant extract in E100 and E15 biofuels. Additions of V. negundo and C. roseus extract separately in both the biofuels seems to be more effective inhibition actions to prevent the mild steel corrosion than A. marmelos or E. ganitrus addition so as the corrosion rates of the mild steel in E100 and E15 are successfully lowered even than in commercial gasoline (E0). The results obtained from the corrosion rate revealed the order of the corrosion inhibition efficiency (IE) as V. negundo > C. roseus > A. marmelos > E. ganitrus. The maximum IE (IEmax) in V. negundo and C. roseus leaves was showed about 89-86% and 71-75%, respectively, at 2000 ppm concentration, in spite of the other two more plants leaf extract also used as the corrosion inhibitors for the mild steel in both E100 and E15 biofuels. The IE increased on increasing inhibitor concentration following the Langmuir and Temkin adsorption isotherms but decreased with immersion time which suggested that the corrosion inhibition mechanism is of physical type of adsorption of the leaves constituents on the mild steel surface. A. marmelos extract acted as an anodic type of inhibitor in E100 and E15, while E. ganitrus acted as mixed

scholarly journals Mild steel corrosion inhibition by synthesized 7-(Ethylthiobenzimidazolyl) Theophylline

2021 ◽  
Author(s):  
N’guessan Yao Silvère Diki ◽  
Nagnonta Hippolyte Coulibaly ◽  
Kadjo François Kassi ◽  
Albert Trokourey
Keyword(s):  
Weight Loss ◽  
Mild Steel ◽  
Corrosion Inhibition ◽  
Inhibition Efficiency ◽  
Physical Adsorption ◽  
Reaction System ◽  
Steel Corrosion ◽  
Tafel Polarization ◽  
Mild Steel Corrosion ◽  
System Temperature

The corrosion inhibition of mild steel by 7-(ethylthiobenzimidazolyl) theophylline (7-ETBT) in 1 M HCl medium was investigated through weight loss and Tafel polarization techniques within a temperature range of 298 to 318 K. The inhibition efficiency depends on the concen­tration of 7-ETBT and reaction system temperature. The maximum inhibition efficiency values of 90.73 and 87.06 %, respectively, were estimated using both weight loss and Tafel polarization techniques at 298 K. The results suggest spontaneous and predominant physical adsorption of 7-ETBT on the metal surface which obeys Langmuir isotherm model. Furthermore, Tafel polarization method revealed that 7-ETBT is a mixed-type inhibitor. Po­tentiodynamic polarization results are in accordance with weight loss data to a good extent.

scholarly journals An Ecofriendly Initiative for the Corrosion Inhibition of Mild Steel in 1 M HCl Using Tecoma capensis Flower Extract

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
A. Prithiba ◽  
R. Rajalakshmi
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibition ◽  
Immersion Time ◽  
Inhibition Efficiency ◽  
Adsorption Process ◽  
Electrochemical Impedance ◽  
Analytical Techniques ◽  
Electrochemical Studies ◽  
Flower Extract ◽  
Mixed Type Inhibitor

Corrosion inhibition of mild steel in 1 M HCl in the presence of Tecoma capensis flower extract was carried out by means of mass loss, potentiodynamic polarisation, and electrochemical impedance techniques. The inhibition efficiency varied with concentration of the inhibitor, immersion time, and temperature. The adsorption of the inhibitor on mild steel surface obeys Langmuir’s adsorption isotherm. Thermodynamic parameters reveal that the adsorption process is spontaneous. Electrochemical studies reflect that the inhibitor acts as a mixed-type inhibitor. Surface analytical techniques ascertain the inhibitive nature of the studied inhibitor.

scholarly journals Inhibition of Mild Steel Corrosion in 1M Hydrochloric Medium by the Methanolic Extract of Ammi visnaga L. Lam Seeds

2020 ◽  
Vol 2020 ◽  
pp. 1-10 ◽  
Author(s):  
Aouatife Zaher ◽  
Abdelkarim Chaouiki ◽  
Rachid Salghi ◽  
Asmaa Boukhraz ◽  
Brahim Bourkhiss ◽  
...  
Keyword(s):  
Mild Steel ◽  
Inhibition Efficiency ◽  
Methanolic Extract ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Inhibitory Effect ◽  
Total Extract ◽  
Ammi Visnaga ◽  
Mild Steel Corrosion ◽  
First Time

The chemical composition of the methanolic extract of Ammi visnaga (Khella) seeds from the Sidi Slimane region is determined for the first time by Gas Chromatography coupled with Mass Spectrometry (GC/MS). Ten compounds representing 99.638% of the total extract were identified. Khellin (49.011%), Visnagin (26.537%) and Dimethylethylamine (15.108%) are the major components. Moreover, the inhibitory effect of the Methanolic extract of the seeds of Ammi visnaga on the corrosion of mild steel in a solution of 1M HCl is determined using weight loss measurements, the potentiodynamic technique as well as the technique of electrochemical impedance spectroscopy (EIS). It is found that the extract reduces the corrosion rate of the steel in the acid solution. Inhibition efficiency increases as the concentration of the extract increases. The tested compound has an inhibition efficiency of 84% for a concentration equal to 1.0 g/L. The polarization measurements indicate that the examined extract acts as a mixed inhibitor with predominant anodic efficacy. The data obtained from EIS studies are analyzed to model this process using appropriate equivalent circuit models. The adsorption of the extract on the surface of the mild steel obeys the Langmuir adsorption isotherm in acidic medium and the activation is determined and discussed.

scholarly journals Corrosion Behavior and Adsorption Thermodynamics of Some Schiff Bases on Mild Steel Corrosion in Industrial Water Medium

2013 ◽  
Vol 2013 ◽  
pp. 1-13 ◽  
Author(s):  
S. S. Shivakumar ◽  
K. N. Mohana
Keyword(s):  
Mild Steel ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Molecular Structures ◽  
Water Medium ◽  
Industrial Water ◽  
Mild Steel Corrosion ◽  
Inhibition Performance ◽  
Increasing Temperature

The inhibition performance and adsorption behavior of (E)-2-(3-nitrobenzylidene) hydrazine carbothioamide (SB1) and (E)-2-(4-(dimethylamino) benzylidene) hydrazine carbothioamide (SB2) on mild steel corrosion in industrial water medium have been investigated by gravimetric, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques. The results revealed that inhibition efficiency depends on both the concentration of the inhibitors and temperature of the system. Increasing temperature reduces the inhibition efficiency of both inhibitors. Polarization studies indicated that these compounds behave as mixed type of inhibitors. The adsorption of both inhibitors was spontaneous and followed Langmuir adsorption isotherm. Thermodynamic parameters are calculated and discussed. The relation between inhibition efficiency and molecular structures of SB1and SB2was discussed by considering quantum chemical parameters. The surface adsorbed film was characterized by scanning electron microscopy (SEM).

scholarly journals Electrochemical Impedance Spectroscopy and Potentiodynamic Polarization Analysis on Anticorrosive Activity of Thiophene-2-Carbaldehyde Derivative in Acid Medium

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Nimmy Kuriakose ◽  
Joby Thomas Kakkassery ◽  
Vinod P. Raphael ◽  
Shaju K. Shanmughan
Keyword(s):  
Electrochemical Impedance Spectroscopy ◽  
Impedance Spectroscopy ◽  
Mild Steel ◽  
Corrosion Inhibition ◽  
Potentiodynamic Polarization ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Freundlich Isotherm ◽  
Polarization Analysis ◽  
Polarization Studies

The corrosion inhibition efficiency of thiophene-2-carbaldehyde tryptophan (T2CTRY) on mild steel (MS) in 1 M HCl solution has been investigated and compared using weight loss measurements, electrochemical impedance spectroscopy, and potentiodynamic polarization analysis. The Schiff base exhibited very good corrosion inhibition on mild steel in HCl medium and the inhibition efficiency increased with the increase in concentration of the inhibitor. The adsorption of the inhibitor on the surface of the corroding metal obeys Freundlich isotherm. Thermodynamic parameters (Kads, ΔG ads0) were calculated using adsorption isotherm. Polarization studies revealed that T2CTRY acts as a mixed type inhibitor. A maximum of 96.2% inhibition efficiency was achieved by EIS studies at a concentration of 1 mM.

Sign in / Sign up

Export Citation Format

Share Document