scholarly journals Inhibition of Mild Steel Corrosion in 1M Hydrochloric Medium by the Methanolic Extract of Ammi visnaga L. Lam Seeds

2020 ◽  
Vol 2020 ◽  
pp. 1-10 ◽  
Author(s):  
Aouatife Zaher ◽  
Abdelkarim Chaouiki ◽  
Rachid Salghi ◽  
Asmaa Boukhraz ◽  
Brahim Bourkhiss ◽  
...  
Keyword(s):  
Mild Steel ◽  
Inhibition Efficiency ◽  
Methanolic Extract ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Inhibitory Effect ◽  
Total Extract ◽  
Ammi Visnaga ◽  
Mild Steel Corrosion ◽  
First Time

The chemical composition of the methanolic extract of Ammi visnaga (Khella) seeds from the Sidi Slimane region is determined for the first time by Gas Chromatography coupled with Mass Spectrometry (GC/MS). Ten compounds representing 99.638% of the total extract were identified. Khellin (49.011%), Visnagin (26.537%) and Dimethylethylamine (15.108%) are the major components. Moreover, the inhibitory effect of the Methanolic extract of the seeds of Ammi visnaga on the corrosion of mild steel in a solution of 1M HCl is determined using weight loss measurements, the potentiodynamic technique as well as the technique of electrochemical impedance spectroscopy (EIS). It is found that the extract reduces the corrosion rate of the steel in the acid solution. Inhibition efficiency increases as the concentration of the extract increases. The tested compound has an inhibition efficiency of 84% for a concentration equal to 1.0 g/L. The polarization measurements indicate that the examined extract acts as a mixed inhibitor with predominant anodic efficacy. The data obtained from EIS studies are analyzed to model this process using appropriate equivalent circuit models. The adsorption of the extract on the surface of the mild steel obeys the Langmuir adsorption isotherm in acidic medium and the activation is determined and discussed.

scholarly journals Mitigation of Mild Steel Corrosion in Acidic Solution Using Inhibitor

2011 ◽  
Vol 8 (s1) ◽  
pp. S53-S60 ◽  
Author(s):  
M. Vishnudevan
Keyword(s):  
Mild Steel ◽  
Sodium Benzoate ◽  
Inhibition Efficiency ◽  
Acidic Solution ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Trisodium Citrate ◽  
Tafel Polarization ◽  
Mild Steel Corrosion ◽  
Maximum Inhibition

The inhibition efficiency of mild steel corrosion in HCl acidic solution containing various concentrations of mixed inhibitors were evaluated by conducting Tafel polarization and electrochemical impedance studies. The mixed inhibitors used in this present investigation were trisodium citrate and sodium benzoate. In this present investigation 0.01 N to 0.1 N concentrations of HCl was used at 30°C. Sodium benzoate present in the mixed inhibitive system enhanced the inhibition efficiency through chemisorptions. The maximum inhibition efficiency ( 95.4%) was obtained for the mixed inhibitive system containing 0.05 M citrate and 0.5 M benzoate in 0.1 N HCl.

scholarly journals Corrosion Behavior and Adsorption Thermodynamics of Some Schiff Bases on Mild Steel Corrosion in Industrial Water Medium

2013 ◽  
Vol 2013 ◽  
pp. 1-13 ◽  
Author(s):  
S. S. Shivakumar ◽  
K. N. Mohana
Keyword(s):  
Mild Steel ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Molecular Structures ◽  
Water Medium ◽  
Industrial Water ◽  
Mild Steel Corrosion ◽  
Inhibition Performance ◽  
Increasing Temperature

The inhibition performance and adsorption behavior of (E)-2-(3-nitrobenzylidene) hydrazine carbothioamide (SB1) and (E)-2-(4-(dimethylamino) benzylidene) hydrazine carbothioamide (SB2) on mild steel corrosion in industrial water medium have been investigated by gravimetric, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques. The results revealed that inhibition efficiency depends on both the concentration of the inhibitors and temperature of the system. Increasing temperature reduces the inhibition efficiency of both inhibitors. Polarization studies indicated that these compounds behave as mixed type of inhibitors. The adsorption of both inhibitors was spontaneous and followed Langmuir adsorption isotherm. Thermodynamic parameters are calculated and discussed. The relation between inhibition efficiency and molecular structures of SB1and SB2was discussed by considering quantum chemical parameters. The surface adsorbed film was characterized by scanning electron microscopy (SEM).

Corrosion Inhibition of Mild Steel by Benzotriazoliumionic Liquid in Hydrochloric Acid

2011 ◽  
Vol 239-242 ◽  
pp. 1409-1413
Author(s):  
Hong Mei Wang ◽  
Ke Long Huang ◽  
Zhi Ping Zhu
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibition ◽  
Potentiodynamic Polarization ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Polarization Data ◽  
Impedance Measurements ◽  
Mild Steel Corrosion ◽  
Mixed Type Inhibitor

The inhibiting behavior of 1-ethyl-3-butylbenzotriazolium ionic liquids，[C2Bt][Br] ,on mild steel corrosion in 5 wt.% HCl as corroding solution was investigated using weight loss，potentiodynamic polarization and electrochemical impedance measurements. The obtained results indicated that [C2Bt][Br] is a good inhibitor for the mild steel in 5 wt.% HCl solution. The inhibition efficiency increased with an increase of inhibitive concentration. Potentiodynamic polarization data indicated that the [C2Bt][Br] acted essentially as a mixed-type inhibitor. The electrochemical impedance study showed that corrosion inhibition took place by adsorption.

scholarly journals Corrosion Inhibition of Mild Steel in 0.5 M H2SO4 Solution by Plant Extract of Annona squamosa

2021 ◽  
Vol 33 (9) ◽  
pp. 2219-2228
Author(s):  
S. Karthikeyan ◽  
S.S. Syed Abuthahir ◽  
A. Samsath Begum ◽  
K. Vijaya
Keyword(s):  
Mild Steel ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Inhibitory Effect ◽  
Inhibition Mechanism ◽  
H2so4 Solution ◽  
Annona Squamosa ◽  
Mild Steel Corrosion ◽  
Weight Loss Method ◽  
Loss Method

In aqueous solution of 0.5M H2SO4, the Annona Squamosa extract was systematically analyzed to ensure its inhibition mechanism by using potentiodynamics polarization, the weight loss method, and electrochemical impedance spectroscopy (EIS) and its inhibitory effect on mild steel corrosion. For mild steel corrosion in 0.5 M H2SO4 solution, its inhibition efficiency increases and decreases with an increase in its concentration and temperature, respectively. Potentiodynamic polarization analyses revealed that the Annona Squamosa behaves as a cathodic inhibitor. In presence of Annona Squamosa extract in 0.5 M H2SO4 solution, an increase in the activation energy of corrosion leads to a decrease in the rate of mild steel corrosion. On mild steel surfaces, the adsorption behaviour of the extract conformed to the Temkin isotherm, Langmuir isotherm and Arrhenius equation. The EIS results were correlated with the polarization findings. According to atomic force microscopy (AFM) and scanning electron microscopy (SEM), the inhibition of mild steel corrosion proceeds through the adsorption of the extract on the mild steel surface.

scholarly journals Inhibitive Effect of Costus afer Extracts on Mild Steel Corrosion in Acidic Medium

2016 ◽  
Vol 7 ◽  
pp. 60-67
Author(s):  
Lebe A. Nnanna ◽  
Wisdom O. John ◽  
Tochukwu E. Esihe ◽  
Kelechi C. Denkoro ◽  
Victor I. Okparaku ◽  
...  
Keyword(s):  
Mild Steel ◽  
Room Temperature ◽  
Inhibition Efficiency ◽  
Gravimetric Method ◽  
Steel Corrosion ◽  
Corrosion Process ◽  
Inhibition Effect ◽  
A Value ◽  
Mild Steel Corrosion ◽  
Costus Afer

Inhibition effect of Costusafer on mild steel in 0.5 M HCl was studied using gravimetric method at room temperature. It was found out that Costusafer inhibited the corrosion of mild steel in the acidic environment and that the efficiency of inhibition increased as the concentration of the inhibitor in the environment increased. The data was used to test different isotherms and it suited the Langmuir isotherm. A value of -15.995 kJmol-1 was gotten for the ∆Goads. This value showed that the extracts of Costusafer inhibited the corrosion process through physiosorption mechanism. The high value of inhibition efficiency of the extract as the concentration increased in rationalized in terms of the increase in herteroatoms, saponnins and tannins which are present in the extract.

scholarly journals Benzylidene as Efficient Corrosion Inhibition of Mild Steel in Acidic Solution

Proceedings ◽  
2019 ◽  
Vol 41 (1) ◽  
pp. 27
Author(s):  
Shaimaa B. Al-Bghdadi ◽  
Mahdi M. Hanoon ◽  
Jafer F. Odah ◽  
Lina M. Shaker ◽  
Ahmed A. Al-Amiery
Keyword(s):  
Mild Steel ◽  
Inhibition Efficiency ◽  
Gravimetric Method ◽  
Steel Corrosion ◽  
Solution Temperature ◽  
Acidic Environment ◽  
Mild Steel Corrosion ◽  
Electron Microscopy Analysis ◽  
Microscopy Analysis ◽  
Steel Coupon

A New benzylidene derivative namely benzylidene-5-phenyl-1,3,4-thiadiazol-2-amine (BPTA), was successfully synthesized and characterized using Fourier Transform Infrared Spectroscopy, Nuclear Magnetic Resonance and elemental analysis (CHN) techniques. The inhibition efficiency of BPTA on mild steel corrosion in 1.0 N HCl was tested at various temperatures. The methodological work was achieved by gravimetric method complemented with morphological investigation. The concentrations of inhibitor were 0.1, 0.2, 0.3, 0.4 and 0.5 mM at the temperatures 303, 313, 323 and 333 K. The BPTA, molecules as become superior corrosion inhibitor with 92% inhibition efficiency of mild steel coupon in the acidic environment. The inhibition efficiency increased with increasing concentrations of BPTA and the excellent efficiency was performed with the 0.5 mM concentration and followed with 0.4 mM. In acidic environment, the 0.5 and 0.4 mM gave the optimum performance with weight loss technique and scanning electron microscopy analysis. On the other hand, the inhibition efficiency decreased with the increase of temperature. Results of BPTA indicated mixed type inhibitor and the adsorption on the mild steels surface obeys the Langmuir adsorption isotherm. It was found that the BPTA performance depend on the concentration and the solution temperature. Quantum chemical calculations have been done to correlate the electronic characteristics of BPTA with the corrosive inhibitive impact. Experimental and theoretical results are in good agreement.

scholarly journals The inhibition of mild steel corrosion in 0.5 M H2SO4 solution by radish leaf extract

RSC Advances ◽  
2019 ◽  
Vol 9 (70) ◽  
pp. 40997-41009 ◽  
Author(s):  
Dongyi Li ◽  
Panpan Zhang ◽  
Xinyu Guo ◽  
Xiaowei Zhao ◽  
Ying Xu
Keyword(s):  
Weight Loss ◽  
Mild Steel ◽  
Electrochemical Method ◽  
Leaf Extract ◽  
Steel Corrosion ◽  
Inhibitory Effect ◽  
H2so4 Solution ◽  
Mild Steel Corrosion ◽  
Weight Loss Method ◽  
Loss Method

The inhibitory effect of radish leaf extract (RLE) on mild steel corrosion in 0.5 M H2SO4 was studied by the weight loss method and the electrochemical method.

scholarly journals Inhibiting Effects of Rabeprazole Sulfide on the Corrosion of Mild Steel in Acidic Chloride Solution

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
M. K. Pavithra ◽  
T. V. Venkatesha ◽  
M. K. Punith Kumar
Keyword(s):  
Mild Steel ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Protection Efficiency ◽  
Langmuir Adsorption ◽  
Kinetic And Thermodynamic Parameters ◽  
Mild Steel Corrosion ◽  
Acidic Chloride Solution ◽  
Acidic Chloride ◽  
Mixed Type Inhibitor

The corrosion inhibition effect of Rabeprazole sulfide (RS) on mild steel in 1 M hydrochloric acid (HCl) was investigated using weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and chronoamperometric measurements. Protection efficiency of RS increases with the concentration and decreases with the rise in temperature. Adsorption of RS on mild steel surface in 1 M HCl follows Langmuir adsorption isotherm. The kinetic and thermodynamic parameters governing the adsorption process were calculated and discussed. The polarization results suggest that RS performed as an excellent mixed-type inhibitor for mild steel corrosion in 1 M HCl.

Sign in / Sign up

Export Citation Format

Share Document